Samsung HPP5071X/XAA User manual

PLASMA DISPLAY TV
Chassis : D68A(N)
Model : HPP5071X/XAA (HP-P5071)
PLASMA DISPLAY TV CONTENTS
Specifications
Alignment and Adjustments
Exploded View and Parts List
Service Item
Schematic Diagrams
1.
2.
3.
4.
5.

ELECTRONICS
©Samsung Electronics Co., Ltd. APR. 2004
Printed in Korea
AA82-01476A
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.

Specifications
Samsung Electronics 1-1
1. Specifications
MODEL
Screen Size
HP-P5071
Display
Remote Control
Display
Remote Control
Voltage
Power Consumption
Number of Pixels
ANTENNA input
VIDEO Input
AUDIO Intput
Monitor Output
Speaker Output
Accessory
Dimensions
Weight
127 Cm / 50 Inches (16:9)
1257(W) x 84(D) x 740(H)mm / 49.5(W) x 3.3(D) X 29.1(H) inches
59(W) x 22(D) x 209(H)mm / 2.3(W) x 0.9(D) x 8.2(H) inches
44 Kg / 97 lbs
164g / 0.36 lbs (Including batteries)
AC 120V~, 60Hz
400 W
1366(H) X 768(V)
VHF, UHF (75Ωunbalanced)
AV1, AV2, AV3(Side)
S-VIDEO1, S-VIDEO2(Side)
COMPONENT1 (480i/480p/720p/1080i)
COMPONENT2 (480i/480p/720p/1080i)
PC (MINI D-SUB 15P)
DVI-D
AV1
AV2 / S-VIDEO1
AV3(Side) / S-VIDEO2(Side)
COMPONENT1, COMPONENT2
PC
DVI-D
VIDEO, AUDIO(L/R)
15W + 15W (8Ω)
Remote Control/AAA Batteries, Power Cord
Antenna Cable, Owner’s Instructions

1-2 Samsung Electronics
MEMO

Alignment and Adjustments
Samsung Electronics 2-1
2. Alignment and Adjustments
2-1 Service Mode
2-1-1 SERVICE MODE Entry Method (General Transmitter)
■Using the Customer Remote
1. Turn the power off and set to stand-by mode.
2. Press the remote bottons in this order; POWER OFF-MUTE-1-8-2- POWER ON to turn the set on.
3. The set turns on and enters service mode.
2-1-2 Initial SERVICE MODE DISPLAY State
2-1-2(A) OSD DISPLAY
2-1-2(B) Button Operations in SERVICE MODE
♣♣While in Tuner mode, the direct access buttons can be used to select and change channels.
☞Indicates selected input mode
☞ Picture Adjustment
☞ Setting the Initial Values
☞Setting the Special Features
☞ Options-1 : Particular Product Options
☞ Options-2 : PDP Properties Options
☞ Initializing after saving the adjustments
☞ Software Version Information
Factory Mode Current Input Mode
01. Picture Improvement √
02. Initial Setting √
03. PIP/Test Pattern √
04. Option-1 √
05. Option-2 √
06. Reset √
Release : 2004-04-01-22:00
Version : T_NPL50NUS-1000
Menu Displays all menus
UP/DOWN Cursor moves to select items
LEFT/RIGHT To increase and decrease the data of the selected items
(ENTER) Confirm your choice(Store OR Enter)
TV/VIDEO button Change input source

Alignment and Adjustments
2-2 Samsung Electronics
2-2 WHITE Balance Coordinates
2-2-1 SPP4251 White Balance Adjustment
1. W/B Adjustment is required for the following six modes :
DVI →Component(1080i) →Component(720p) →PC →VIDEO (Video port) →VIDEO (Graphic port)
2. Adjustment Method (Signal equipment : MSPG-925LTH, Measurement equipment : CA210)
■MSPG-925LTH
Equipment that outputs analog and digital signals simultaneously
(Analog / Digital signal output / TV signal output (S-Video included) / HDTV signal output)
-. Digital Serial : TMDS (DVI24, SiI160) + DVI-I (Analog, Digital)
-. Monitor Signal (Analog): R, G, B, HS, VS, CS
-. TV Signal (CVBS) : NTSC M, NTSC J (7.5 IRE On/Off) (BNC or RCA), PAL B, D, G, H, I, PAL M, Nc
-. D-TV Signal (1080i, 720p, 480p)
♣♣MSPG-925 is used to adjust the W/B.
■CA210 : Color Analyzers adjusting brightness, chromaticity and etc.
-. R.G.B monochrome correction, brightness and gamma character adjustment
-. White Balance and flickering measurement
(a) DVI
1) Input Toshiba pattern (#16) at 720p resolution.
2) Select 02. Picture Improvement -> 01. White Balance.
3) Adjust items 07(Sub Contrast) & 08(Sub Brightness).
4) Adjust Items 01-03 (RGB Drives) and Items 04-06 (RGB Cutoffs).
(b) Component
1) Input Toshiba Pattern (#16) at 1080i resolution.
2) Select 01. Picture Improvement > 01. White Balance.
3) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode.
4) Change input to Toshiba Pattern (#16) at 720p resolution.
5) Adjust White Balance by selecting and adjusting Items 01. - 08. as performed in DVI mode.
(c) PC
1) Input Toshiba Pattern (#16) in PC input at 1024 x 768 @ 60Hz.
2) Select 01. Picture Improvement -> 01. White Balance.
3) Adjust White Balance by selecting and adjusting Items 01 - 08 as performed in DVI mode.
(d) Video
The video signal uses the video port when there is no other input signal.
However, signal uses the graphic port in PIP mode, which includes other input signals (PC, DVI, Component, etc.), Video
adjustment should be performed with Video portand Graphic port separately.

1) Input Toshiba Pattern (#16) to Video Input.
2) Select 04. Option-1 -> 10. Video Port.
3) Set 10. Video Port equal to Video.
4) At Main SVC Menu, select 01. Picture Improvement -> 01. White Balance.
5) Adjust Items 01 - 08 as performed in DVI mode.
6) Return to Main SVC menu and select 04. Option-1 -> 10. Video Port.
7) Set 10. Video Port equal to Graphic.
8) At Main SVC Menu, select 01. Picture Improvement -> 01. White Balance.
9) Adjust Items 01 -> 08 as performed in DVI Mode.
* Thus, Micom saves the W/B data separately for each memory mode of the block (See the block diagram given below) during
W/B adjustment.
Alignment and Adjustments
Samsung Electronics 2-3
PC
(A-RGB)
DVI
(D-RGB)
VSP9437 FLI2310
V-PEAKING Y-Delay
C-Delay
Brightness
Contrast
Saturation
RF
VIDEO
RGB
RGB
Scaler
RGB/YUV
CONTRAST
BRIGHT
ASI510
RGB-cont
RGB-bri
R-gamma
G-gamma
B-gamma
DNIe
Bri-offset
Con-offset
Different adjustment values will be applied
to DVI, PC ,DTV(Component) and Video mode.
Adjustment
Reg
Memory
Mode
- DVI
- PC
- Video
- Component(DTV)
Y/R-gain
Cr/B-gain
Cb/G-gain
Y/R-offset
Cr/b-offset
Cb/G-offset
Adjustment
Reg
Memory
Mode
Analog PC
- Auto Color
value(RGB)
DTV Mode
Logic
SIL169
SW
IC
S/W
R-dri
G-dri
B-dri
R-cutoff
G-cutoff
B-cutoff
Adjustment
Reg
AD9883
CXA2151
YPbPr
DTV
COMP1,2
Graphic
Port
Memory
Mode
- DVI
- PC
- Video
- Component(DTV)
Video
Port

Alignment and Adjustments
2-4 Samsung Electronics
2-3-1 Factory OSD Main Menu
2-3 Factory Data
☞Indicates selected input mode
☞ Picture Adjustment
☞ Setting the Initial Values
☞Setting the Special Features
☞ Setting particular product options
☞ Setting PDP Properties Options
☞ Initializing after saving the adjustments
☞ Software Version Information
01.Picture Improve
Factory Mode Current Input Mode
01. Picture Improvement √
02. Initial Setting √
03. PIP/Test Pattern √
04. Option-1 √
05. Option-2 √
06. Reset √
Release : 2004-04-01-22:00
Version : T_NPL50NUS-1000
☞White Balance Adjustment
☞ Color Adjustment
☞ Contrast & Brightness Enhancement
☞Detail Enhancement Sharpness Adjustment
☞ Y/C Delay Setting according to the System and
Input Modes
☞ Motion Enhancing Adjustment
☞ DNIe Registers
☞ DNIe Registers
☞ Logic Registers of the Panel
☞ Picture Size Registers
01.Picture Improvement Current Input Mode
01. White Balance √
02. Color √
03. Cont/Bri Enhancement √
04. Detail Enhancement √
05. Y/C Delay √
06. Motion √
07. DNIe √
08. DNIe Additional √
09. Logic √
10. Picture Size √
H/L
L/L
x
y
Y(fL)
x
y
Y(fL)
VIDEO
280
295
40.0
280
295
1.0
Component
285
290
41.5
290
285
0.5
PC
285
295
37.5
285
295
0.8
DVI
285
295
40.0
285
295
0.8
2-2-2 White Balance Coordinates by Mode

Alignment and Adjustments
Samsung Electronics 2-5
01.Picture Improve => 01.White Balance Adjustment
01.White Balance
01.R Drive
02.G Drive
03.B Drive
04.R Cutoff
05.G Cutoff
06.B Cutoff
07.Sub Contrast
08.Sub Brightness
09.R Gain
10.G Gain
11.B Gain
12.R/Cr Offset
13.G/Y Offset
14.B/Cb Offset
15.Auto color
TV
140
128
120
128
128
128
37
54
X
X
X
X
X
X
on/off
Mode-1
W/B
W/B
W/B
W/B
W/B
W/B
W/B
W/B
x
x
x
x
x
x
x
Mode-2
W/B
W/B
W/B
W/B
W/B
W/B
W/B
W/B
142
142
142
60
48
64
O
Mode-3
W/B
W/B
W/B
W/B
W/B
W/B
W/B
W/B
142
142
142
60
48
64
O
Mode-4
W/B
W/B
W/B
W/B
W/B
W/B
W/B
W/B
x
x
x
x
x
x
x
Initial Values of Input Modes
Video Component PC DVI
Relevant IC
Logic
DNIe
AD9883
ITEM
❈Input modes require respective storing the changes after adjustment.
01~06 : Logic
07~08 : DNIe
09~15 : AD9883

Alignment and Adjustments
2-6 Samsung Electronics
01.Picture Improve => 02.Color Adjustment
02.Color
01.U-Saturation
02.V-saturation
03.RGB/YUV U-SAT
04.RGB/YUV V-SAT
05.RGB/YUV Tint
06.FLI-saturation
07.R Gamma
08.G Gamma
09.B Gamma
10.Gain-Sel
11.Cr Gain
12.Cb Gain
13.Y Gain
TV
32
32
30
32
3
124
32
32
32
1
7
7
1
Mode-1
32
32
30
32
3
124
32
32
32
1
7
7
1
Mode-2
x
x
x
x
x
x
32
32
32
x
x
x
x
Mode-3
x
x
x
x
x
x
32
32
32
x
x
x
x
Mode-4
x
x
x
x
x
x
32
32
32
x
x
x
x
Initial Values of Input Modes
PC DVI
Relevant IC
VSP9437
FLI2310
ASI510
CXA2151Q
ITEM
01~05 : VSP9437
07~09 : ASI510
06 : FLI2310
10~13 : CXA2151
Video Component

Alignment and Adjustments
Samsung Electronics 2-7
01.Picture Improve => 03.Contrast & Brightness Enhancement
03.Cont/Bri Enhancement
01.Contrast
02.Brightness
03.RGB/YUV Contrast
04.RGB/YUV Brightness
05.FLI-Contrast
06.FLI-Brightness
07.R Contrast
08.G Contrast
09.B Contrast
10.R Brightness
11.G Brightness
12.B Brightness
TV
32
48
32
15
128
128
32
32
32
0
0
0
Mode-1
32
48
32
15
128
128
32
32
32
0
0
0
Mode-2
x
x
x
x
x
x
32
32
32
0
0
0
Mode-3
x
x
x
x
x
x
32
32
32
0
0
0
Mode-4
x
x
x
x
x
x
32
32
32
0
0
0
Initial Values of Input Modes
PC DVI
Relevant IC
VSP9437
FLI2310
ASI510
ITEM
01~04 : VSP9437
07~12 : ASI510
05~06 : FLI2310
Video Component

Alignment and Adjustments
2-8 Samsung Electronics
01.Picture Improve => 04.Detail Enhancement
04.Detail Enhancement
01.VAPGAIN
02.VAPINV
03.YPFT
04.YPFG
05.APK-1st-BPM
06.APK-2nd-BPM
07.Denoise-BPM
08.APK-1st-HPM
09.APK-2nd-HPM
10.Denoise-HPM
11.HenhGain
12.HLEGain
13.HChrEnGain
TV
0
0
3
6
1
0
0
6
3
0
64
64
32
Mode-1
0
0
3
6
1
0
0
6
3
0
64
64
32
Mode-2
x
x
x
x
x
x
x
x
x
x
x
x
x
Mode-3
x
x
x
x
x
x
x
x
x
x
x
x
x
Mode-4
x
x
x
x
x
x
x
x
x
x
x
x
x
Initial Values of Input Modes
PC DVI
Relevant IC
uPD64083
VSP9437
FLI2310
ITEM
01~04 : uPD64083
05~10 : VSP9437
11~13 : FLI2310
Video Component

Alignment and Adjustments
Samsung Electronics 2-9
01.Picture Improve => 05.Y/C Delay Setting according to the System and Input Modes
05.Y/C Delay
01. NTSC
02. NTSC-AV
03. RGB/YUV-Y
04. RGB/YUV-UV
05. FLI-Y
06. FLI-C
TV
251
250
58
58
5
11
Mode-1
251
250
58
58
5
11
Mode-2
x
x
x
x
x
x
Mode-3
x
x
x
x
x
x
Mode-4
x
x
x
x
x
x
Initial Values of Input Modes
PC DVI
Relevant IC
VSP9437
ITEM
01.Picture Improve => 06.Motion Enhancing Adjustment
06.Motion
01.SLLTHD_RF3CH
02.SLLTHD_ETC
03.V-motion Tresh
04.ISHFTM
05.ISHFTS
TV
2
2
32
1
1
Mode-1
2
2
32
1
1
Mode-2
x
x
x
x
x
Mode-3
x
x
x
x
x
Mode-4
x
x
x
x
x
Initial Values of Input Modes
PC DVI
Relevant IC
VSP9437-M
VSP9437-S
FLi2310
ITEM
01~04 : VSP9437
05~06 : FLI2310
01 : VSP9437-M
02 : VSP9437-S
03 : FLI2310
Video Component
Video Component
FLI2310

Alignment and Adjustments
2-10 Samsung Electronics
01.Picture Improve => 07.DNIe Registers
07. DNIe
01. SUB BRIGHT
02. SUB CONT
03. SCALE MAX
04. SCALE MIN
05. DCE UPPER
06. DCE CUTOFF
07. R GAIN 1X
08. CE UPPER
09. CE CUTOFF
10. R GAIN 1Y
11. CE GAIN
12. R GAIN 2X
13. R GAIN 2Y
14. R ND ON
15. R CORING ON
16. PATT SEL
17. R CORING TH1
18. R CORING TH2
19. R CORING TH3
20. BLACK GAIN
21. WHITE GAIN
22. WTE GAIN
23. CTE GAIN
TV
W/B
W/B
36
16
16
230
12
196
32
8
20
6
4
1
1
0
1
1
1
2800
5000
300
176
Mode-1
W/B
W/B
36
16
16
230
12
196
32
8
20
6
4
1
1
0
1
1
1
2800
5000
300
176
Mode-2
W/B
W/B
36
16
16
230
12
196
32
8
20
6
4
1
1
0
1
1
1
2800
5000
300
176
Mode-3
W/B
W/B
36
16
16
230
12
196
32
8
20
6
4
1
1
0
1
1
1
2800
5000
300
176
Mode-4
W/B
W/B
36
16
16
230
12
196
32
8
20
6
4
1
1
0
1
1
1
2800
5000
300
176
Initial Values of Input Modes
PC DVI
Relevant IC
DNIe
ITEM
01~23 : DNIe
Video Component

Samsung Electronics 2-11
01.Picture Improve => 08.DNIe Additional Registers
08. DNIe Additional
01. R D ALPHAU
02. R BLACK GAIN MAX
03. R BLACK TILT
04. R WHITE GAIN MAX
05. R GAIN 1 X
06. R GAIN 3 X
TV
32
114
115
144
12
0
Mode-1
32
114
115
144
12
0
Mode-2
32
114
115
144
12
0
Mode-3
32
114
115
144
12
0
Mode-4
32
114
115
144
12
0
Initial Values of Input Modes
PC DVI
Relevant IC
DNIe
ITEM Video Component

Alignment and Adjustments
2-12 Samsung Electronics
01.Picture Improve => 09.Logic Registers
09.Logic
01.R DRIVE
02.G DRIVE
03.B DRIVE
04.R CUTOFF
05.G CUTOFF
06.B CUTOFF
07.GAMMA
08.GTS SET
09.ERD MODE
10.RANDOM NOISE
11.DIFF FILTER
12.APC
13.APC SET
14.APC VALUE
15.ACTIVE VPOS
16.ACTIVE HPOS
17.VSYNC POS
18.HSYNC POS
19.VSYNC WIDTH
20.HSYNC WIDTH
TV
W/B
128
W/B
W/B
128
W/B
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-1
W/B
128
W/B
W/B
128
W/B
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-2
W/B
128
W/B
W/B
128
W/B
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-3
W/B
128
W/B
W/B
128
W/B
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Mode-4
W/B
128
W/B
W/B
128
W/B
1
1
2
0
1
1
0
127
12
19
3
32
2
12
Initial Values of Input Modes
PC DVI
Relevant IC
Logic
ITEM
01~20 : Logic
Video Component

Alignment and Adjustments
Samsung Electronics 2-13
01.Picture Improve => 10.Picture Size
10.Picture Size
01. H START OFFSET
02. V START OFFSET
03. H END OFFSET
04. V END OFFSET
05.OVERSCAN B
06.OVERSCAN G
07.OVERSCAN R
TV
0
0
0
0
63
63
63
Mode-1
0
0
0
0
63
63
63
Mode-2
0
0
0
0
63
63
63
Mode-3
0
0
0
0
63
63
63
Mode-4
0
0
0
0
63
63
63
Initial Values of Input Modes
PC DVI
Relevant IC
ASI510
ITEM
02.Initial Setting Current Input Mode
01. Initial P-Mode √
02. P-Mode Value √
03. Initial Color Tone √
04. Color Tone Value √
02.Setting the Initial Values
01.Initial P-Mode Current Input Mode
01. Dynamic
02. Standard
03. Movie
04. Custom
02.Initial Setting => 01.Initial P-Mode
02. P-Mode Value Current Input Mode
01. Dynamic √
02. Standard √
03. Movie √
04. Custom √
02.Initial Setting => 02.P-Mode Value
☞Indicates selected input mode
☞ Reset after saving the P-Mode adjustments
☞ P-MODE the data Values
☞ Reset after saving the color tone adjustments
☞ Color tone the data Values
01~07 : ASI510
Video Component
Available options for the PC/DVI Mode are
High,Middle, Low and Custom.
Available options for the PC/DVI Mode are
High,Middle, Low and Custom.

Alignment and Adjustments
2-14 Samsung Electronics
02.Initial Setting Current Input Mode
01. Cool2
02. Cool1
03. Normal
04. Warm1
05. Warm2
❈Available Settings for the PC Mode are
Custom,Color Tone 1, Color Tone 2, Color Tone 3
❈ Available options for the DVI Mode are
ColorTone1, ColorTone2, ColorTone3
02.Initial Setting => 03.Initial Color Tone
01.Dynamic Current Input Mode
01. Contrast œ100 √
02. Brightness œ45 √
03. Sharpness œ75 √
04. Color œ55 √
05. Tint œ50 √
02.Initial Setting => 02.P-Mode Value => 01.Dynamic
02.Standard Current Input Mode
01. Contrast œ80 √
02. Brightness œ50 √
03. Sharpness œ50 √
04. Color œ50 √
05. Tint œ50 √
02.Initial Setting => 02.P-Mode Value => 02.Standard
03.Movie Current Input Mode
01. Contrast œ65 √
02. Brightness œ55 √
03. Sharpness œ25 √
04. Color œ40 √
05. Tint œ50 √
02.Initial Setting => 02.P-Mode Value => 03.Movie
04.Custom Current Input Mode
01. Contrast œ80 √
02. Brightness œ50 √
03. Sharpness œ50 √
04. Color œ50 √
05. Tint œ50 √
02.Initial Setting => 02.P-Mode Value => 04.Custom

Alignment and Adjustments
Samsung Electronics 2-15
04.Color Tone Value Current Input Mode
01. Cool2
02. Cool1
03. Normal
04. Warm1
05. Warm2
❈Adjusting and Storing the Changes :
Change the White Balance (Color Temperature)
1. Selecting an item will display the same options as
those of White Balance.
2. Available options for the PC Mode are Custom,
Color Tone 1, Color Tone 2, Color Tone 3
3. Available options for the DVI Mode are ColorTone1,
ColorTone2, ColorTone3.
4. Data Storing is classified according to the PC Mode
& Other Modes.
02.Initial Setting => 04.Color Tone Value
03.PIP/Test Pattern
☞Note : On items 01-10, a PIP Box appears on the screen.
03.PIP/Test Pattern
01.PIP R CONT
02.PIP G CONT
03.PIP B CONT
04.PIP R BRIGHT
05.PIP G BRIGHT
06.PIP B BRIGHT
07.PIP FILTER LC
08.PIP FILTER ML
09.PIP FILTER MR
10.PIP FILTER UC
11. LOG PATTERN
12. LOG HIGH LEVEL
13. LOG LOW LEVEL
14. ASI COLORRBAR
TV
32
32
32
0
0
0
0
0
0
0
0
255
0
1
Mode-1
32
32
32
0
0
0
0
0
0
0
0
0
0
255
Mode-2
32
32
32
0
0
0
0
0
0
0
0
0
0
255
Mode-3
32
32
32
0
0
0
0
0
0
0
0
0
0
255
Mode-4
32
32
32
0
0
0
0
0
0
0
0
0
0
255
Initial Values of Input Modes
PC DVI
Relevant IC
ASI510
Logic
ASI510
ITEM
01~10 : ASI510
11~14 : Logic ASI510
Video Component

Alignment and Adjustments
2-16 Samsung Electronics
04.Option-1
05.Option-2 Current Input Mode
00. Pixel Shift œV √
01. Shift Test œ0 √
02. Pixel Number œ1 √
03. Shift Line œ1 √
04. Shift Time œ4 √
05. Number Range œ4 √
06. Line Range œ4 √
07. FLi Memory Clock œ11 √
08. DNIe DEMO œOn √
09. PILOT HIGH œ21 √
10. PILOT LOW œ16 √
11. CHECKSUM œ0000 √
05.Option-2
00. OFF ↔ V ↔ G ↔V/G
01. 0 : minute , 1 : SEC
02. Left,right movement Pixel
03. Upper, low movement Pixel
04. Shift Test
04.Option-1 Current Input Mode
00. AGC œOff √
01. Language œEnglish √
02. DDC Write œOn √
03. Melody Volume œ6 √
04. Tuner œ2-Tuner √
05. LNA œOn √
06. High Deviation œOff √
07. SD Delay œ3 √
08. HD Delay œ1 √
09. V Mute Time œ6 √
10. Video Port Graphic œGraphic √
11. LNA Plus œOn √
12. V-Chip œUSA √
06. High Deviation : To prevent Sound Buzz resulting from regional conditions of the input signal.
07. SD Delay : AV mode Delay
- 1.8ms delay --------- delay 0
- 38ms delay --------- delay 1
- 54ms delay --------- delay 2
- 108ms delay (max) --------- delay 3
08. HD Delay : DTV/PC/DVI mode Delay
10. Video Port : Setting of Aurora Input Port for VIDEO signal
- Graphic : Input Video Signal though Graphic port of Aurora (In case of NON-PIP VIDEO)
- Video : Input Video Signal though Graphic port of Aurora (In case of PIP VIDEO)