Samsung PL42A450P1 User manual

Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente.
BN68-01680B-00
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
Model Serial No.
imagine the possibilities
Plasma TV
user manual
Country Customer Care Center Web Site
ARGENTINE 0800-333-3733 www.samsung.com/ar
BRAZIL 0800-124-421
4004-0000 www.samsung.com
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
COLOMBIA 01-8000112112 www.samsung.com.co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
HONDURAS 800-7919267 -
JAMAICA 1-800-234-7267 www.samsung.com/latin
MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com
NICARAGUA 00-1800-5077267 -
PANAMA 800-7267 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin
VENEZUELA 0-800-100-5303 www.samsung.com/latin
BN68-01680B.indb 1 2008-06-05 오후 9:09:35

English - 2
Important Warranty Information Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,
or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and
programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary
images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent
burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display
full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format
selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01680B.indb 2 2008-06-05 오후 9:09:35

English - 3
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can
cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to
page 25 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in
the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated
technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact
on the performance of the product.
Avoid operating the TV at temperatures below 5°C (41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission on
the screen.
Playing a DVD or a game console may cause similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low
temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station
etc. Failure to do so may cause a serious damage to your set.
BN68-01680B.indb 3 2008-06-05 오후 9:09:35

English - 4
Symbols Press One-Touch
Button
➢
Note
Contents
General Information
■ List of Features ..............................................................5
■ Accessories....................................................................5
■ Viewing the Control Panel .............................................6
■ Viewing the Connection Panel.......................................7
■ Remote Control..............................................................8
■ Installing Batteries in the Remote Control ..................... 9
Connections
■ Connecting VHF and UHF Antennas.............................9
■ Connecting Cable TV...................................................10
■ Connecting a DVD Player or Cable Box / Satellite
receiver (Set-Top Box) via HDMI ................................ 11
■ Connecting a DVD Player or Cable Box / Satellite
receiver (Set-Top Box) via DVI.................................... 11
■ Connecting a DVD Player or Cable Box / Satellite
receiver (Set-Top Box) via Component cables............12
■ Connecting a Camcorder.............................................12
■ Connecting a VCR .......................................................13
■ Connecting an Amplier / DVD Home Theater ............14
■ Connecting a PC..........................................................15
Operation
■ Turning the TV On and Off...........................................16
■ Plug & Play Feature.....................................................16
■ Changing Channels .....................................................18
■ Adjusting the Volume ...................................................18
■ Using the TOOLS Button .............................................19
■ Viewing the Display......................................................19
■ Viewing the Menus.......................................................19
■ Memorizing the Channels ............................................20
■ To Select the Source....................................................21
■ To Edit the Input Source Name....................................21
Picture Control
■ Changing the Picture Standard....................................22
■ Customizing the Picture Settings.................................22
■ Adjusting the Detailed Settings ....................................23
■ Conguring Picture Options ........................................25
■ Using the 3D Function .................................................31
■ Resetting the Picture Settings to the Factory Defaults 32
Sound Control
■ Changing the Sound Standard ....................................33
■ Customizing the Sound................................................33
■ Setting the TruSurround XT .........................................34
■ Choosing a Multi-Channel Sound (MTS) Track ...........35
■ Automatic Volume Control ...........................................35
■ Setting the TV Speakers On/Off .................................36
■ Listening to the Sound of the Sub (PIP) Picture ..........36
■ Connecting Headphones (Sold separately).................37
Channel Control
■ Adding and Erasing Channels .....................................38
■ Activating the Child Lock..............................................39
■ Fine Tuning Analog Channels......................................40
■ Setting Color System ..................................................40
PC Display
■ Using Your TV as a Computer (PC) Display ................41
■ Display Modes .............................................................41
■ Setting up the TV with your PC....................................42
Time Setting
■ Setting the Time...........................................................44
Function Description
■ Selecting a Menu Language........................................46
■ Setting the Light Effect.................................................46
■ Adjusting the TV On/Off Melody Sound .......................47
■ Setting the Entertainment mode ..................................48
■ Using the Energy Saving Feature................................48
■ Viewing Closed Captions.............................................49
■ Setting the AV Color System........................................50
■ Viewing the Picture in Picture (PIP).............................50
About Anynet+
■ What is Anynet+?.........................................................52
■ Connecting Anynet+Devices.......................................52
■ Setting Up Anynet+......................................................53
■ Scanning and Switching between Anynet+Devices.... 53
■ Recording ....................................................................54
■ Listening through a Receiver (Home theater)..............55
■ Check Points before Requesting Service ....................55
Appendix
■ Securing the TV to the Wall .........................................56
■ Troubleshooting ...........................................................57
■ Wall- mount adjustment (Sold separately) ...................58
■ Preparing before installing Wall-Mount on the wall......59
■ Wall Mount Kit Specications (VESA)..........................60
■ How to assemble the Stand-Base ...............................61
■ Specications...............................................................61
English
BN68-01680B.indb 4 2008-06-05 오후 9:09:35

English - 5
General Information
List of Features
• Adjustable picture settings that can be stored in the TV’s memory.
• Automatic timer to turn the TV on and off.
• A special sleep timer.
• Excellent Picture Quality
- DNIe technology provides life-like clear images.
• SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
• HDMI/DVI connection of your PC to this TV.
Accessories
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
Remote Control / AAA Batteries
(Not available in all locations)
Power Cord Owner’s Instructions
Cover-Bottom / Screws (2ea)
(Refer to page 60)
Warranty Card / Safety Guide Manual
(Not available in all locations)
Cloth-Clean
The following parts are sold separately and are available at most electronics stores.
➢If you do not use a good quality cable, some noise may appear on the screen.
S-VIDEO Cable HDMI Cable HDMI/DVI cable Component Cables Audio Cables
Video Cable PC Cable PC Audio Cable Antenna Cable
BN68-01680B.indb 5 2008-06-05 오후 9:09:37

English - 6
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
1 SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI1, HDMI2, HDMI3).
➢In the on-screen menu, use this button as you
would use the ENTER button on the remote control.
2 MENU
Press to see an on-screen menu of your TV’s features.
3 + VOL –
Press to increase or decrease the volume. In the on-
screen menu, use the + VOL –buttons as you would
use the ◄and ►buttons on the remote control.
4 CH
Press to change channels.
In the on-screen menu, use the CH buttons as
you would use the ▲and ▼buttons on the remote
control.
5 Power Indicator
Blinks and turns off when the power is on and lights up
in stand-by mode.
6 POWER
Press to turn the TV on and off.
7 Remote Control Sensor
Aim the remote control towards this spot on the TV.
8 Speakers
➢The product color and shape may vary depending on the model.
Front Panel buttons
Touch each button to operate.
BN68-01680B.indb 6 2008-06-05 오후 9:09:37

English - 7
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For
more information on connecting equipment, see pages 9-15. The product color and shape may vary depending on the model.
1 POWER IN
Connect the supplied power cord.
2 AV IN 1(VIDEO / AUDIO R/L)
Connect RCA cable to an appropriate external A/V
device such as VCR, DVD or Camcorder.
3 DVI IN (HDMI 2) (AUDIO-R/L)
Connect to the DVI audio output jack of an external device.
4 HDMI IN 1, 2
Connect to the HDMI jack of a device with an HDMI
output. (HDMI IN 2 supports HDMI-DVI IN and
connection from a PC.)
- This input can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI
cable will be necessary to make this connection.
-
When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
5 ANT IN
Uses a 75Ω Coaxial connector for an Air/Cable
Network.
6 AUDIO OUT (R/L)
Audio outputs to external devices.
7 SERVICE
For service only.
8 3D SYNC OUT
Connect to 3D IR Emitter.
9 COMPONENT IN 1, 2
Connects Component video/audio.
0 PC IN[PC]/[AUDIO]
Connect to the video and audio output jack on your PC.
Side Panel Jacks
Use the right side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game.
The product color and shape may vary depending on the model.
1 HDMI IN 3
Connect to the HDMI jack of a device with HDMI output.
2 S-VIDEO (AV IN 2)
S-Video input for external devices with an S-Video output.
3 AV IN 2(VIDEO / AUDIO R/L)
Video and Audio inputs for external devices.
4 HEADPHONE
You can connect a set of headphones if you wish to watch a television program without
disturbing other people in the room.
HDMI IN 3
BN68-01680B.indb 7 2008-06-05 오후 9:09:38

English - 8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
1 POWER
Turns the TV on and off.
2 TV
Selects the TV mode directly.
3 NUMERIC BUTTONS
Press to directly select a channel.
4 –
Use to select a channel over 100.
For example, for channel 122,
press “-”, then “2”, then “2”.
5 MUTE
Press to temporarily cut off the
sound.
6 VOL
Press to increase or decrease the
volume.
7 CH LIST
Used to display Channel Lists on
the screen.
8 TOOLS
Use to quickly select frequently
used functions.
9 UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu
items and change menu values.
0 INFO
Press to display information on the
TV screen.
! COLOR BUTTONS
Use these buttons in the Channel
list.
@ CC
Controls the caption decoder.
# E.MODE
Press to select the preset display
and sound modes for sports,
cinema and games.
$ Use these buttons in the DMA and
Anynet+modes.
( : This remote can be used
to control recording on Samsung
recorders with the Anynet+feature)
% SOURCE
Press to display all of the available
video sources.
^ PRE-CH
Tunes to the previous channel.
& CH
Press to change channels.
* W.LINK
Not Available.
( MENU
Displays the main on-screen menu.
) RETURN
Returns to the previous menu.
a EXIT
Press to exit the menu.
b MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
c P.MODE
Press to select the picture effect.
d FAV.CH
No Available.
e P.SIZE
Press to change the screen size.
BN68-01680B.indb 8 2008-06-05 오후 9:09:38

English - 9
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat
Twin Leads” below.
If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round
Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that
has 300 Ω twin flat leads, follow the directions below.
1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not
supplied).
Use a screwdriver to tighten the screws.
2Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennas with 75 Ω Round Leads
1 Plug the antenna lead into the ANT IN terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics
shops).
1Connect both antenna leads to the combiner.
2Plug the combiner into the ANT IN terminal on the bottom of the back panel.
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
➢Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
➢Do not mix battery types, i.e. alkaline and manganese.
3 Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. The remote control can be used up to about 23 feet
(7m) from the TV. (Assuming typical TV usage, the batteries last for about one year.)
➢If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
ANT IN
ANT IN
UHF
VHF
ANT IN
UHF
VHF
BN68-01680B.indb 9 2008-06-05 오후 9:09:39

English - 10
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1 Plug the incoming cable into the ANT IN terminal on the back of the TV.
➢Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
1 Find the cable that is connected to the ANT OUT terminal on your cable box.
➢This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2 Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Connecting to a Cable Box that Descrambles All Channels
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below.
You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available
at most electronics stores.)
1 Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
➢This terminal might be labeled “ANT
IN”, “VHF IN” or simply, “IN”.
2 Connect this cable to a two-way splitter.
3 Connect an Antenna cable between an
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
4 Connect an Antenna cable between the
ANT OUT terminal on the cable box and the
B–IN terminal on the RF(A/B) switch.
5 Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
6 Connect the last Antenna cable between
the OUT terminal on the RF (A/B) switch
and the ANT IN terminal on the rear of the
TV.
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B”
position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
ANT OUT
ANT IN
ANT IN
ANT IN
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Incoming
cable
TV Rear
RF (A/B)
Switch
ANT IN
ANT IN
Splitter
Incoming
cable
RF (A/B)
Switch
Cable Box
BN68-01680B.indb 10 2008-06-05 오후 9:09:40

English - 11
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output jack on the external device. This connection will
provide the highest quality picture.
1 Connect an HDMI Cable
between the HDMI IN(1, 2
or 3) jack on the TV and the
HDMI jack on the DVD Player
or Cable Box / Satellite
receiver (Set-Top Box).
What is HDMI?
• HDMI, or high-definition multimedia interface, is an interface that enables the
transmission of digital audio and video signals using a single cable without
compression.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
➢Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1 Connect a HDMI/DVI Cable
or DVI-HDMI Adapter
between the HDMI IN 2 jack
on the TV and the DVI jack
on the DVD Player or Cable
Box/Satellite receiver (Set-
Top Box).
2 Connect Audio Cables
between the DVI IN (HDMI 2)
[R-AUDIO-L] jack on the TV
and the AUDIO OUT jacks
on the DVD Player or Cable
Box/Satellite receiver (Set-
Top Box).
➢Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
➢When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
Audio Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
HDMI Cable (Not supplied)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel TV Side Panel
or
BN68-01680B.indb 11 2008-06-05 오후 9:09:42

English - 12
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1 Connect a Video Cable
(or S-Video Cable) between
the AV IN 2 [VIDEO]
(or S-VIDEO) jack on the TV
and the VIDEO OUT jack on
the Camcorder.
2 Connect Audio Cables
between the AV IN 2
[L-AUDIO-R] jacks on the TV
and the AUDIO OUT jacks on
the Camcorder.
➢Each Camcorder has a different back panel configuration.
➢
When connecting a Camcorder, match the color of the connection terminal to the cable .
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box / Satellite receiver (Set-Top
Box) to your TV.
1 Connect Component Cables
between the COMPONENT
IN (1 or 2) [Y, PB, PR]
jacks on the TV and the
COMPONENT [Y, PB, PR]
jacks on the DVD Player or
Cable Box / Satellite receiver
(Set-Top Box).
2 Connect Audio Cables
between the COMPONENT
IN (1 or 2) [R-AUDIO-L] jacks
on the TV and the AUDIO
OUT jacks on the DVD Player
or Cable Box / Satellite
receiver (Set-Top Box).
➢Component video separates the video into Y (Luminance (brightness)), PB
(Blue) and PR(Red) for enhanced video quality. Be sure to match the component
video and audio connections. For example, if connecting the video cable to
COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.
➢Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different
back panel configuration.
➢When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),
match the color of the connection terminal to the cable.
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
TV Rear Panel
Audio Cable (Not supplied)
2
Component Cable (Not supplied)1
Camcorder
TV Side Panel
S-Video Cable(Not supplied)
1
Video Cable (Not supplied)1
Audio Cable (Not supplied)2
or
BN68-01680B.indb 12 2008-06-05 오후 9:09:44

English - 13
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according
to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
➢If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook
up to the right and left audio input jacks of the TV. If your VCR is stereo, you must
connect two cables.
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
VCR Rear Panel
TV Rear Panel
2
Audio Cable(Not supplied)5
Video Cable(Not supplied)4
Antenna cable(Not supplied)3
TV Side Panel
1 Unplug the cable or antenna
from the back of the TV.
2 Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3 Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
ANT IN terminal on the TV.
4Connect a Video Cable
between the VIDEO OUT
jack on the VCR and the AV
IN 1 or AV IN 2 [VIDEO] jack
on the TV.
5Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 1 (or AV IN 2) [R-AUDIO-L]
jacks on the TV.
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1 To begin, follow steps 1–3
in the previous section to
connect the antenna or cable
to your VCR and your TV.
2 Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the AV
IN 2 [S-VIDEO] jack on the
TV.
3 Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 2 [R-AUDIO-L] jacks on
the TV.
An S-Video may be included with your VCR. (If not, check your local electronics store.)
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
VCR Rear Panel
TV Rear Panel
Audio Cable (Not supplied)
3
S-Video Cable(Not supplied)2
Antenna cable(Not supplied)1
TV Side Panel
BN68-01680B.indb 13 2008-06-05 오후 9:09:47

English - 14
Connecting an Amplifier / DVD Home Theater
1 Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV and
AUDIO IN [L-AUDIO-R] on
the Amplifier / DVD Home
Theater.
When an audio amplifier is
connected to the AUDIO OUT
[R-AUDIO-L] jacks terminals:
Decrease the volume of the
TV, and adjust the volume
level with the Amplifier’s
volume control.
➢Each Amplifier / DVD Home Theater has a different back panel configuration.
➢When connecting an Amplifier / DVD Home Theater, match the color of the
connection terminal to the cable.
Amplifier / DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
BN68-01680B.indb 14 2008-06-05 오후 9:09:49

English - 15
Connecting a PC
Using the D-Sub Cable
1 Connect a D-Sub Cable
between PC IN [PC] jack on
the TV and the PC output
jack on your computer.
2 Connect a PC Audio Cable
between PC IN [AUDIO] jack
on the TV and the Audio Out
jack of the sound card on
your computer.
Using the HDMI/DVI Cable
1 Connect a HDMI/DVI cable
between the HDMI IN 2 jack
on the TV and the PC output
jack on your computer.
2 Connect a 3.5mm Stereo mini-
plug/2RCA cable between the
DVI IN (HDMI 2) [R-AUDIO-L]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
➢Each PC has a different back panel configuration.
➢When connecting a PC, match the color of the connection terminal to the cable.
➢When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.
PC
TV Rear Panel
PC Audio Cable (Not supplied)2
D-Sub Cable (Not supplied)
1
Using the D-Sub Cable
Using the HDMI/DVI Cable
TV Rear Panel
PC
HDMI/DVI Cable (Not supplied)1
3.5mm Stereo mini-plug/2RCA Cable (Not supplied)
2
BN68-01680B.indb 15 2008-06-05 오후 9:09:51

English - 16
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢It may take a while before you see a full picture.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
1 If the television is in standby mode, press the POWER button on the remote
control. The message Start Plug & Play. is displayed. Press the ENTER button.
Language menu is displayed.
2 Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTER button. The message Select Home Use when installing this TV in
your home. is displayed.
3 Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER button.
➢ The default selection is Home Use.
We recommend setting the TV to Home Use mode for the best picture in
your home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return
to Home Use (Standard): Press the Volume button. When the volume
OSD is displayed, press and hold the MENU button for 5 seconds.
4 The message Check antenna input. is displayed with OK selected.
Press the ENTER button.
5 Press the ▲ or ▼ button to select Air, STD, HRC, or IRC, then press the
ENTER button.
Continued...
Plug & Play
Select Home Use
when installing this TV in your home.
Move Enter
Store Demo Home Use
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
Language
Move Enter
English
Français
Español
Português
Plug & Play
Check antenna input.
Enter Skip
OK
Plug & Play
Air/Cable Air
STD
HRC
IRC
Move Enter Skip
BN68-01680B.indb 16 2008-06-05 오후 9:09:52

English - 17
6 Press the ENTER button to select Start. The TV will begin memorizing all of the
available channels.
➢ To stop the search before it has finished, press the
ENTER button with Stop selected.
7 Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
➢ You can set the Month, Day, Year, Hour, and Minute directly by pressing
the numeric buttons on the remote control.
8 Press the ENTER button to confirm your setting.
The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢ Even if the ENTER button is not pressed, the message will automatically
disappear after several seconds.
If you want to reset this feature …
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the ENTER button.
3 Press the ENTER button again to select Plug & Play.
The message Start Plug & Play. is displayed.
Plug & Play
Enter Skip
Air 44
Stop
Auto Program
Plug & Play ►
Language : English ►
Time ►
Caption ►
Light Effect : In Watching TV ►
Wall-mount Adjustment ►
Melody : Off ►
Entertainment : Off ►
Energy Saving : Off ►
AV Color System : Auto ►
PIP ►
Setup
T V
Move Return
Enter
Enjoy your watching.
OK
Plug & Play
-- -- ---- -- -- am
▼
▼
Move Adjust Enter
Clock Set
Month Day Year Hour Minute am/pm
BN68-01680B.indb 17 2008-06-05 오후 9:09:53

English - 18
Changing Channels
Using the Channel Buttons
1 Press the CH or CH button to change channels.
➢When you press the CH or CH button, the TV changes channels in
sequence. You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels). You will not see
channels that were either erased or not memorized. See pages 20 to
memorize channels.
Using the Number Buttons
1 Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
The TV will change channels when you press the second number.
➢For quick channel change, press the number buttons, then press the ENTER
button.
Using the “-” Button
The “ ” button is used to select stations that broadcast a digital signal.
1 To select a channel over 100, for channel 122, press “-”, then “2”, then “2”.
Using the PRE-CH Button to select the Previous Channel
Use the number buttons to quickly tune to any channel.
1 Press the PRE-CH button. The TV will switch to the last channel viewed.
➢To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
Adjusting the Volume
Using the Volume Buttons
1 Press the VOL or VOL button to increase or decrease the volume.
Using the Mute Button
At any time, you can cut off the sound using the MUTE button.
1 Press MUTE and the sound cuts off.
Mute will displayed on the screen.
2 To turn mute off, press the MUTE button again, or simply press the VOL or
VOL button.
BN68-01680B.indb 18 2008-06-05 오후 9:09:53

English - 19
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu
changes depending on which external input mode you are viewing.
1Press the TOOLS button.
The TOOLS menu will appear.
2 Press the ▲/▼ button to select a menu, then press the ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected
items.
For a more detailed description of each function, refer to the corresponding
page.
• Anynet+(HDMI-CEC), see page 53
• Picture Mode, see page 22
• Sound Mode, see page 33
• Sleep Timer, see page 45
• SRS TS XT, see page 34
• Energy Saving, see page 48
• MTS, see page 35
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
1 Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
1 With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons:
Picture, Sound, Channel, Setup, Input.
2 Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-menu.
3 Press the EXIT button to exit.
➢It takes about one minute until the on-screen menu disappears.
Viewing the Menus
Air 3
Mono
Picture : Standard
Sound : Custom
MTS : Mono
SRS TS XT : Off
12 : 00 am
Anynet+(HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
MTS : Mono
Enter Exit
Move
TOOLS
Mode : Standard ►
Cell Light 7
Contrast 90
Brightness 45
Sharpness 20
Color 50
Tint G 50 R 50
Detailed Settings
►
Picture Options ►
Reset : OK ►
PictureT V
Enter
Move Exit
BN68-01680B.indb 19 2008-06-05 오후 9:09:54

English - 20
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER
button.
3 Press the ENTER button.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the EXIT button to exit.
➢• All available analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the
available channels are memorized, use the CH or CH button to scan through the channels. This eliminates
the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel
manager).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Air/Cable.
Press the ▲ or ▼ button to select Air, STD,HRC,or IRC, then press the
ENTER button.
Press the EXIT button to exit.
➢STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point, the signal source has been selected. Proceed
to "Storing Channels in Memory (Automatic Method)".
Air/Cable : Air ►
Auto Program ►
Channel Manager ►
Fine Tune ►
Color System : Auto ►
ChannelT V
Enter
Move Return
Air/Cable :
Auto Program
Channel Manager
Fine Tune
Color System : Auto
ChannelT V
Enter
Move Return
Air
STD
HRC
IRC
Air/Cable : Air ►
Auto Program ►
Channel Manager ►
Fine Tune ►
Color System : Auto ►
ChannelT V
Enter
Move Return
Auto Program
Air 3
Start
Enter Return
BN68-01680B.indb 20 2008-06-05 오후 9:09:55