Samsung PN50C7000YFXZA User manual

Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
http://www.samsung.com/sec/
Model _____________ Serial No. _____________
[BOOK-PC7000]Web Manual-Eng.indb 1 2010-06-21 오전 10:31:30

2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
User Instructions
• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as ‘screen burn’. To avoid such image retention, refer to page 15 of this manual to reduce the degree of
brightness and contrast of the screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
• The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
• Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to
the screen.
Damages caused by the above effect are not covered by the Warranty.
• After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm
10 cm 10 cm
10 cm
10 cm
10 cm
[BOOK-PC7000]Web Manual-Eng.indb 2 2010-06-21 오전 10:31:30

3
Contents
ENGLISH
English
Getting Started
yList of Features ......................................................... 4
yAccessories .............................................................. 4
yViewing the Control Panel ......................................... 5
yViewing the Remote Control...................................... 6
yConnecting to an Antenna ........................................ 7
yPlug & Play (Initial Setup)........................................... 7
Connections
yConnecting to an AV Device...................................... 8
yConnecting to an Audio Device............................... 10
yConnecting to a PC ................................................ 11
yChanging the Input Source ..................................... 12
Basic Features
yHow to Navigate Menus.......................................... 12
yUsing the 정보표시 button (Now & Next guide) ........ 13
yPlanning Your Viewing............................................. 13
yChannel Menu ....................................................... 14
Seeing Channels 14
Using Favorite Channels 14
Memorizing Channels 14
Editing Channels 15
Other Features 15
yPicture Menu .......................................................... 16
Changing the Preset Picture Mode 16
Adjusting Picture Settings 16
Economical Solutions 16
Changing the Picture Options 16
Viewing TV using the 3D function 19
Setting up the TV with Your PC 21
ySound Menu........................................................... 21
Changing the Preset Sound Mode 21
Adjusting Sound Settings 21
Sound Settings 22
ySetup Menu............................................................ 23
Setting the Time 23
Using the Sleep Timer 23
Setting the On / Off Timer 23
Locking Programs 24
Other Features 24
Picture In Picture (PIP) 25
ySupport Menu......................................................... 26
Advanced Features
yNetwork Connection ............................................... 27
Connecting to a Wired Network 27
Connecting to a Wireless Network 29
Using Data Service 33
yMedia Play.............................................................. 34
Connecting a USB Device 34
Connecting to your PC through a network 34
Screen Display 36
Playing the Multiple Files 41
Media Play Additional Function 41
yAnynet+ .................................................................. 43
Setting Up Anynet+ 44
Switching between Anynet+ Devices 44
Recording 45
Listening through a Receiver 45
Troubleshooting for Anynet+ 46
yInternet@TV ............................................................ 47
Getting Started with Internet@TV 47
Setting up Internet@TV 48
Using the Internet@TV service 50
yAllShare .................................................................. 51
About AllShare 51
Setting Up AllShare 51
Other Information
yAssembling the Cables ........................................... 53
yInstalling the Wall Mount ......................................... 54
yAssembling the Cables ........................................... 55
ySecuring the TV to the Wall..................................... 56
To Avoid the TV from Falling 56
yTroubleshooting ...................................................... 57
yLicense ................................................................... 60
ySpecifications ......................................................... 60
yIndex ...................................................................... 61
Check the Symbol!
T
e⠙ີە
Note Step by Step Guide
This function can be used by pressing the
간편메뉴 button on the remote control.
Indicates additional information. Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
[BOOK-PC7000]Web Manual-Eng.indb 3 2010-06-21 오전 10:31:31

4
Getting Started
English
Getting Started
List of Features
yExcellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
yMedia Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 34).
yInternet@TV: You can use various internet services and view useful information and entertaining content (p. 47).
yAllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 51).
ySelf Diagnosis: You can check whether picture or sound operate normally (p. 26).
Accessories
✎ Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
✎ The items' colors and shapes may vary depending on the models.
yRemote Control & Batteries (AAA x 2)
yOwner’s Instructions
yAntenna Cable
yCleaning Cloth
yWarranty Card / Safety Guide
Blanking Bracket & Screw (1EA) Program CD Cable Tie
Holder-Wire (3EA) Holder-Wire stand Ferrite Core (Power cord)
Ferrite Core (Power cord) Ferrite Core (AV Cable) yHolder-Ring (4EA)
(63 inch model only)
✎ Ferrite Core: The ferrite cores are used to shield the cables from
interference. When connecting a cable, open the ferrite core and
clip it around the cable near the plug as shown in the figure.
x
A(Distance between the ferrite core and one end of the cord put
into the TV set): below 50mm
x
B(Distance between the ferrite core and the other end of the
cord put into the outlet): below 20mm
A
B
Power Cord AV Cable
(M4 X L8)
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
[BOOK-PC7000]Web Manual-Eng.indb 4 2010-06-21 오전 10:31:33

5
01 Getting Started
English
✎ For best cable connection to this product, be sure to use cables with a maximum thickness as below:
yMaximum thickness - 0.55 inches (14mm)
Viewing the Control Panel
✎ The product color and shape may vary depending on the model.
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
TV/외부입력
E
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER E button on the remote control.
메뉴
m
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
- 음량 +
Adjusts the volume. In the OSD, use the - 음량 + buttons as you would use the ◄
and ►buttons on the remote control.
> 채널 < Changes the channels. In the OSD, use the > 채널 < buttons as you would use
the ▼and ▲buttons on the remote control.
P (Power) Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Remote control sensor / Power Indicator
Speakers
[BOOK-PC7000]Web Manual-Eng.indb 5 2010-06-21 오전 10:31:33

6
Getting Started
English
Viewing the Remote Control
Installing batteries (Battery size: AAA)
✎ NOTE
x
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
x
The color and shape may vary depending on the model.
ມ❑ၙᨕ
ႊᘂᦩԕ
⪵໕Ⓧʑᖁ⪙₥ձ
e⠙ີە
ᅖȡ ᳦ഭ
ᱶᅕ⢽᜽
ᯙ░֘
채널관리
⎹▱⊁
메뉴
ך⪵
A B C D
Turns the TV on and off.
Returns to the previous channel.
Cuts off the sound temporarily.
Displays the channel list on the screen
(p. 14).
Changes channels.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to ON will reduce the battery usage
time.)
Link to various internet services (p. 47).
Displays information on the TV screen.
Selects the on-screen menu items and
changes the values seen on the menu.
Exits the menu.
멀티미디어: Displays Media Play (p. 34).
방송안내: Displays the EPG (Electronic
Program Guide)
3D: Sets the 3D mode. (p. 19).
선호채널: Displays Favorite Channel Lists
on the screen (p. 14).
화면크기: Selects the picture size (p. 18).
(Data Service) button: Use it when
you use Data broadcasting services.
(p. 33).
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and
“3”.
Adjusts the volume.
Brings up the OSD.
Displays and selects the available video
sources (p. 12).
Displays the Content View, which
includes Channel List, Internet@TV,
Media Play, AllShare and 3D.
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel List,
Internet@TV, Media Play menu, etc.
Use these buttons in Media Play and
Anynet+ modes (p. 34, 43).
(  : Controls recording for Samsung
recorders that have the Anynet+ feature)
[BOOK-PC7000]Web Manual-Eng.indb 6 2010-06-21 오전 10:31:34

7
01 Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Connecting the power cord and antenna.
✎ The PDP device may interfere with an amateur radio or AM radio.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the 전원
P button. Plug & Play is available only when the Input source is set to TV.
✎ To return to the previous step, press the Red button.
1Selecting a language Press the ▲or ▼button, then press the ENTER
E button.
Select the desired OSD (On Screen Display) language.
P
ᱥᬱ
㥉⸨䖐㐐 GUIDE
2Selecting Store Demo
or Home Use
Press the ◄or ►button, then press the ENTER
E button.
ySelect the Home Use mode. Store Demo mode is for retail
environments.
yTo return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold 메뉴 for 5 sec.
3Selecting a channel Press the lor ▶button, then press the ENTER
E button.For more information, for more
information, refer to Channel →Auto Program (p. 14).
✎ Press the ENTER E button at any time to interrupt the memorization process.
4Setting the Clock
Mode
Set the Clock Mode automatically or manually.
yManual: Allows you to manually set the current date and time (p. 23).
5View the HD
Connection Guide
The connection method for the best HD screen quality is displayed.
6Enjoy the TV. Press the ENTER
E button.
If You Want to Reset This Feature...
O 메뉴 m →Setup →Plug & Play →ENTER E
ANT OUT
VHF/UHF Antenna
or
Cable
Antenna Cable (Not Supplied)
[BOOK-PC7000]Web Manual-Eng.indb 7 2010-06-21 오전 10:31:35

8
English
ConnectionsConnections
Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
✎ HDMI 입력 1(DVI), 2(ARC), 3, 4, PC/DVI 음성입력
x
For better picture and audio quality, connect to a digital device using an HDMI cable.
x
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
x
Be sure to use an HDMI cable with a thickness of 14 mm or less.
– Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
x
A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
ethernet function via HDMI.
x
This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the
ARC function is supported by the HDMI 입력 2(ARC) port only.
– If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set 3D Auto
View or 3D Mode to Off.
x
The ARC function allows digital audio to output via the HDMI 입력 2(ARC) port. It can be enabled only when
the TV is connected with an audio receiver that supports the ARC function.
HDMI OUT
DVI OUT
R-AUDIO-L
AUDIO OUT
WR
Device
Device
WhiteRed
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
HDMI Cable (Not Supplied)
[BOOK-PC7000]Web Manual-Eng.indb 8 2010-06-21 오전 10:31:35

9
English
02 Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
✎ When connecting to 외부입력, the color of the 외부입력 [Y/영상] jack (green) will not match the video cable (yellow).
✎ For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EX-LINK: Connector for service only.
R
GB W R
WR R GB
Y
Y
W R
W R
AUDIO OUT
R-AUDIO-L PRPBY
COMPONENT OUT
AUDIO OUT
R-AUDIO-L
VIDEO OUT
Y
W R
RG B
WR
Device Device
Red White
Red White Yellow
Red Blue Green
Video Cable (Not Supplied)
Component Cable (Not Supplied)
Audio Cable (Not Supplied)
[BOOK-PC7000]Web Manual-Eng.indb 9 2010-06-21 오전 10:31:36

10
English
Connections
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
✎ 디지털 음성출력 (옵티컬)
x
When a Digital Audio System is connected to the 디지털 음성출력 (옵티컬) jack, decrease the volume of both
the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
✎ 음성출력: Connects to the audio input jacks on your amplifier/DVD home theater.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the 음성출력 jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
R-AUDIO-L
AUDIO IN
OPTICAL
WR
Red White
Audio Cable (Not Supplied)
Optical Cable (Not Supplied)
Amplifier / DVD home theater
Digital Audio System
[BOOK-PC7000]Web Manual-Eng.indb 10 2010-06-21 오전 10:31:36

11
English
02 Connections
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
AUDIO OUT
PC OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM 640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF 1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+
✎ NOTE
x
For HDMI/DVI cable connection, you must use the HDMI 입력 1(DVI) jack.
x
The interlace mode is not supported.
x
The set may operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
HDMI to DVI Cable (Not Supplied)
D-Sub Cable (Not Supplied)
Audio Cable (Not Supplied)
[BOOK-PC7000]Web Manual-Eng.indb 11 2010-06-21 오전 10:31:38

12
English
Connections
Changing the Input Source
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
O 메뉴 m →Input →Source List →ENTER E
■TV / PC / AV / Component / HDMI1/DVI / HDMI2 /
HDMI3 / HDMI4 / USB
✎ You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
✎ In the Source List, PC is always activated.
Edit Name
O 메뉴 m →Input →Edit Name →ENTER E
■VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎ When a PC with a resolution of 1920 x 1080 @ 60Hz is
connected to the HDMI 입력 1(DVI) port, you should set
the TV to DVI PC mode under Edit Name.
✎ When connecting an HDMI/DVI cable to the HDMI 입력
1(DVI) port, you should set the TV to DVI PC or DVI
Devices mode under Edit Name.
57󰩺ᇡ᯦ಆ
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
4
1
2
3
ມ
❑ၙᨕ
ႊᘂ
ᦩԕ
⪵໕
Ⓧ
ʑ
ᖁ
⪙
₥ձ
3
D
e⠙ີە
ᅖȡ ᳦ഭ
ᱶ
ᅕ⢽
᜽
ᯙ░֘
채
널관
리
⎹▱⊁
⎹▱⊁
⎹▱⊁
메뉴
ך⪵
A
B
C
D
1 메뉴 button: Displays the main on-screen menu.
2 ENTER
E / Direction button: Move the cursor and
select an item. Confirm the setting.
3 복귀 button: Returns to the previous menu.
4 종료 button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1메뉴
m
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2▲/ ▼Select an icon with the ▲or ▼
button.
3ENTER
E Press ENTER E to access the
sub-menu.
4▲/ ▼Select the desired submenu with
the ▲or ▼button.
5◄/ ►Adjust the value of an item with the
◄or ►button. The adjustment in
the OSD may differ depending on
the selected menu.
6ENTER
E Press ENTER E to confirm the
selection.
7종료
e
Press 종료.
[BOOK-PC7000]Web Manual-Eng.indb 12 2010-06-21 오전 10:31:38

13
English
03 Basic Features
Using the INFO button (Now & Next guide)
The display identifies the current channel and
the status of certain audio-video settings.
The Now & Next guide shows daily TV
program information for each channel
according to the broadcasting time.
yScroll ◄, ►to view information for a
desired program while watching the
current channel.
Planning Your Viewing
Guide
The EPG (Electronic Program Guide)
information is provided by broadcasters.
Using program schedules provided by
broadcasters, you can specify programs you
want to watch in advance so that the channel
automatically changes to the selected
program channel at the specified time.
Program entries may appear blank or out of
date depending on a channel status.
Using Channel View
Using Scheduled View
1 Red (View Mode): View the list of programs that are
playing now or coming up.
2
B
Green (-2 Hours): Viewing the list of programs to be
broadcasted before 2 hours.
3 Yellow (+2 Hours): Viewing the list of programs to be
broadcasted after 2 hours.
4 Blue (Exit): Exits the guide.
5 Information: Displays details of the selected
program.
6 ENTER
E button
– When selecting the current program, you can watch
the selected program.
– When selecting the future program, you can reserve to
watch the selected program. To cancel he schedule,
press the ENTER
E button again and select Cancel
Schedules.
9-1 KBS1 HD
Guide
DTV 일반 6-1 SBS HD
일요일이 좋다
2:00 pm-3:30 pm
해피 선데이
일요일 일요일 밤에
일요일이 좋다(12) 일요일이 좋다2(12)6-1 SBS HD
해피 선데이 도전 골든벨7-1 KBS2 HD
HD 열린 음악회9-1 KBS1 HD
아시아 테마기향 HD..10-1 EBS DTV
11-1 MBC DTV
Mon, Jan 1 12:30 pm
Channel View
Today 6:00 pm - 7:00 pm 7:00 pm - 8:00 pm
View Mode
B
-2 Hours +2 Hours Exit Information E Watch
1 2 3 4 5 6
9-1 KBS1 HD
Guide
DTV 일반 6-1 SBS HD
일요일이 좋다
2:00 pm-3:30 pm
해피 선데이
세계는 지금 일요일이 좋다2(12)7-1 KBS2 HD
HD 클래식 오디세이 도전 골든벨7-1 KBS2 HD
Mon, Jan 1 12:30 pm
Scheduled View
오늘 7:00 pm~ 8:00 pm 8:00 pm~ 9:00 pm
View Mode Exit Information E Watch
14 5 7
ႊᘂᦩԕ
ᱶᅕ⢽᜽
DTV Cable
6-1
6%6+'
10:06 pm - 12:10 am
SBS ⎨㏘ (HD)
No detailed information.
E
|
Korean
Dolby Digital
1080i HD
Mon, 29 Sep 10:15 pm
Watch
Information
[BOOK-PC7000]Web Manual-Eng.indb 13 2010-06-21 오전 10:31:40

14
English
Basic Features
Channel Menu
¦Seeing Channels
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
O 메뉴 m →Channel →Channel List →
ENTER E
Select a channel in the All Channels, Added
Channels, Favorite or Programd screen by
pressing the ▲/ ▼and ENTER E buttons.
Then you can watch the selected channel.
■All Channels: Shows all currently available channels.
■Added Channels: Shows all added channels.
■
*
Favorite: Shows all favorite channels.
■Programd: Shows all currently reserved programs.
✎ Using the color buttons with the Channel List
x
Red (Antenna): Switches to Air or Cable.
x
B
Green (Zoom): Enlarges or shrinks a channel
number.
x
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
c mark appears to the left of the selected channels.
xk
(Page): Move to next or previous page.
xT
(Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons Operations
c
A channel selected.
*
A channel set as a Favorite.
)
A reserved Program.
¦Using Favorite Channels
O 메뉴 m →Channel →Channel List →ENTER E
Add to Favorite / Delete from Favorite T
Set channels you watch frequently as Favorites.
1. Select a channel and press the 간편메뉴 button.
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
To show all Favorite channels, click on the button shown
on the right.
¦Memorizing Channels
O 메뉴 m →Channel →ENTER E
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program T
The TV will begin memorizing all of the available channels.
✎ NOTE
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
₥ձšญ
ᖁ⪙₥ձ
Air Antenna
B
Zoom Select k Page T Tools
Added Channels
Air Antenna
B
Zoom Select k Page T Tools
Added Channels
Delete
Add to Favorite
Lock
Timer Viewing
Timer Recording
Select All
9-1 ♥ KBS1 HD
10-1 ♥ EBS DTV
11-1 MBC DTV
4 일반
5 일반
6 일반
7 일반
8 일반
9 일반
10 일반
9-1 ♥KBS1 HD HD KBS 뉴스
10-1 ♥EBS DTV DTV 다큐 - 여자
11-1 MBC DTV
[HD] MBC 스포츠 뉴스
4 일반
5 일반
6 일반
7 일반
8 일반
9 일반
10 일반
[BOOK-PC7000]Web Manual-Eng.indb 14 2010-06-21 오전 10:31:42

15
English
03 Basic Features
¦Editing Channels
O 메뉴 m →Channel →Channel List →ENTER E
Channel Name Edit
1. Select a channel and press the 간편메뉴 button.
2. Edit the channel name using the Channel Name Edit
menu.
■Channel Name Edit (analog channels only): Assign your
own channel name.
¦Other Features
O 메뉴 m →Channel →ENTER E
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Lock / Unlock, Timer Viewing, Timer Recording,
Select All / Deselect All). Option menu items may differ
depending on the channel status.
1. Select a channel and press the 간편메뉴 button.
2. Select a function and change its settings.
■Add / Delete: Delete or add a channel to display the
channels you want.
✎ NOTE
x
All deleted channels will be shown on the All
Channels menu.
x
A gray-colored channel indicates the channel
has been deleted.
x
The Add menu only appears for deleted
channels.
x
Delete a channel from the Added Channels or
Favorite menu in the same manner.
■Lock / Unlock: Lock a channel so that the channe
cannot be selected and viewed.
✎ This function is available only when the Child Lock
is set to On.
✎ The PIN input screen appears. Enter your 4-digit
PIN, the default of which is “0-0-0-0”. Change the
PIN using the Change PIN option.
■Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the ◄/ ►/ ▲/ ▼buttons to select the
desired channel in Channel List.
2. Press the 간편메뉴 button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
✎ If you selected Once, Every Week or Everyday
in Repeat you can enter the date you want.
4. Select OK, then press the ENTER
E button when
done.
✎ NOTE
x
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
Programd menu.
x
When a digital channel is selected, press the ►
button to view the digital program.
■Timer Recording (digital channels only): Allows you
to record a Program currently being broadcasted or
make a reservation to record a Program scheduled for
broadcast.
✎ A USB device with 4GB of memory or greater
must be connected to the TV.
✎ A USB storage device cannot record until it
completes the Device Performance Test.
✎ In case of USB-HDD, over 5400rpm.
✎ In case of USB Stick, USB 2.0 and SLC Type.
(Minimum size of USB Stick is 2GB.)
✎ To record, press the (REC) button on the
remote. Press (REC) twice to set the recording
duration.
■Select All: Select all the channels in the channel list.
■Deselect All: Deselect all the selected channels.
✎ You can only select Deselect All when one or
more channels are selected.
Programd
(in Channel List)
You can view, modify or delete a show you have reserved to
watch. Programd timer viewing is displayed here. Highlight
a program and press the 간편메뉴 button to display Options.
■Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing” above.
■Cancel Schedules: Cancel a show you have reserved
to watch.
✎ This deletes the highlighted or selected
program(s).
■Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
✎ Alternatively, you can view Information by
highlighting a program and pressing the
ENTER E button.
■Select All / Deselect All: Select or deselect all reserved
programs.
[BOOK-PC7000]Web Manual-Eng.indb 15 2010-06-21 오전 10:31:42

16
English
Basic Features
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
✎ Settings are applied to the channel you're currently
watching.
✎ Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
✎ To reset the fine-tuning, select Reset.
Picture Menu
¦Changing the Preset Picture Mode
O 메뉴 m →Picture →Mode →ENTER E
Mode
T
Select your preferred picture type.
■Dynamic: Suitable for a bright room.
■Standard: Suitable for a normal environment.
■Relax: Suitable for reducing eye strain.
✎ Relax is not available in PC mode.
■Movie: Suitable for watching movies in a dark room.
¦Adjusting Picture Settings
O 메뉴 m →Picture →ENTER E
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
✎ NOTE
x
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
x
In PC mode, you can only make changes to
Cell Light, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
¦Economical Solutions
The Eco Function can be used to enhance your power
savings.
Eco Solution
O 메뉴 m →Picture →Eco Solution →ENTER E
■Energy Saving (Off / Low / Medium / High / Picture
Off / Auto): This adjusts the brightness of the TV in
order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except the volume button
to turn on the screen.
■Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
✎ If you adjust the Cell Light, the Eco Sensor will
be set to Off.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
✎ If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
■No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
✎ Disabled when the PC is in power saving mode.
¦Changing the Picture Options
Advanced Settings
O 메뉴 m →Picture →Advanced Settings →
ENTER E
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
✎ In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off ►
Dynamic Contrast : Medium
Gamma : 0
Expert Pattern : Off
RGB Only Mode : Off
Color Space : Native
White Balance
▼
U Move E Enter R Return
[BOOK-PC7000]Web Manual-Eng.indb 16 2010-06-21 오전 10:31:43

17
English
03 Basic Features
■Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
■Gamma: Adjust the primary color intensity.
■Expert Pattern (Off / Pattern1 / Pattern2): By
running the Expert Pattern function, the picture can
be calibrated. If the OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
✎ After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
✎ While the Expert Pattern is running, sound is not
output.
✎ Only enabled in DTV, Component and HDMI
modes.
■RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
■Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
■White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
■10p White Balance (Off / On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
✎ Available when the picture mode is set to Movie
and when the external input is set to all input.
✎ Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
■Flesh Tone: Emphasize pink “Flesh Tone.”
■Edge Enhancement (Off / On): Emphasize object
boundaries.
■xvYCC (Off / On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
✎ Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎ Some external devices may not support this
function.
Picture Options
O 메뉴 m →Picture →Picture Options →ENTER E
✎ In PC mode, you can only make changes to the Color
Tone, Size and Screen Burn Protection.
■Color Tone (Cool / Normal / Warm1 / Warm2)
✎ Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
✎ Settings can be adjusted and stored for each external
device connected to an input on the TV.
■Size: Your cable box/satellite receiver may have its
own set of screen sizes as well. However, we highly
recommend you use 16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
✎ Available with HD 1080i / 720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
✎ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Motion Judder Canceller : Standard
▼
U Move E Enter R Return
[BOOK-PC7000]Web Manual-Eng.indb 17 2010-06-21 오전 10:31:43

18
English
Basic Features
✎ NOTE
x
When Double ( À , Œ ) mode has
been set in PIP (Picture-in-Picture), the
Picture Size cannot be set.
x
After selecting Zoom1, Zoom2 or
Wide Fit:
1. Press the ►button to select
Position.
2. Press the ENTER
E button.
3. Press the ▲or ▼button to move the picture up
or down.
4. Press the ENTER
E button.
5. Press the ►button to select Reset.
6. Press the ENTER
E button to reset the picture
to its default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄or ►button to select Position.
2. Press the ENTER
E button.
3. Press the ▲, ▼, ◄or ►button to move the
picture.
4. Press the ENTER
E button.
5. Press the ◄or ►button to select Reset.
6. Press the ENTER
E button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
PC 16:9, 4:3
■Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎ When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
✎ Only available for analog channels.
✎ When bar is green, you are receiving the best
possible signal.
■MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
■HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎ Available only in HDMI mode.
■Film Mode (Off / Auto1 / Auto2 / Cinema Smooth):
Sets the TV to automatically sense and process film
signals from all sources and adjusts the picture for
optimum quality.
✎ An 1080p 24Hz HDMI signal must be input to use
the Cinema Smooth function.
✎ Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■Motion Judder Canceller (Off / Standard / Smooth
/ Demo): Removes drag from fast scenes with a lot of
movement to provide a clearer picture.
✎ If Motion Judder Canceller is Demo, you can
compare the difference between on and off modes.
■Screen Burn Protection: To reduce the possibility of
screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
program the time between movement of the picture in
minutes.
Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after-images on the screen.
✎ Optimum condition for pixel shift
Item TV/AV/Component/
HDMI/PC
Horizontal 0~4 4
Vertical 0~4 4
Time (minute) 1~4 min 4 min
✎ The Pixel Shift value may differ depending on the
TV size (inches) and mode.
✎ This function is not available in the Screen Fit
mode.
Auto Protection Time (10 min. / 20 min. / 40 min. /
1 hour / Off): Set the time the screen remains idle with a
still image until the screen saver is activated. The Screen
Saver prevents the formation of ghost images on the
screen.
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
✎ The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.
✎ Press any key on the remote control to cancel this
feature.
Side Gray (Light / Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
⪵໕Ⓧʑ
[BOOK-PC7000]Web Manual-Eng.indb 18 2010-06-21 오전 10:31:44

19
English
03 Basic Features
¦Viewing TV using the 3D function
O 메뉴 m →Picture →3D →ENTER E
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the TV’s 3D function.
[
WARNING
x
Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and
rest.
x
Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses and
rest.
x
A responsible adult should frequently check on
children who are using the 3D function. If there are
any reports of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
x
Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
x
Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving around
may result in injuries due to running into objects,
tripping, and/or falling.
3D
This exciting new feature enables you to view
3D content. In order to fully enjoy this feature,
you must purchase a pair of Samsung 3D
Active Glasses (SSG-2100AB, SSG-2200AR,
SSG-2200KR) to view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you purchased this TV.
✎ If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
■3D Mode: Select the 3D input format.
✎ If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
✎ When watching 3D images, turn on 3D Active
Glasses.
3D Mode Operation
Off Turns the 3D function off.
2D →3D Changes a 2D image to 3D.
Side by Side Displays two images next to
each other.
Top & Bottom Displays one image above
another.
Line by Line Displays the images for the left
and right eye alternately in rows.
Vertical Stripe
Displays the images for the
left and right eye alternately in
columns.
Checker
Board
Displays the images for the
left and right eye alternately in
pixels.
Frequency
Displays the images for the
left and right eye alternately in
frames.
✎ “Side by Side” and “Top & Bottom” are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
✎ “Vertical Strip”, “Line by Line” and “Checker
Board” are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
✎ “Frequency” displays the frequency (60Hz only)
when the resolution is set to PC.
■3D →2D (Off / On): Displays the image for the left eye
only.
✎ This function is deactivated when 3D Mode set to
“2D →3D” or Off.
■3D View Point: The overall adjustment of 3D
perspective.
✎ This function is deactivated when 3D Mode is set
to “2D →3D” or Off.
■Depth: Adjusts focus / depth in “2D →3D” mode.
✎ This function is only activated when the 3D Mode
is “2D →3D”.
■Picture Correction: Adjusts the images for the left and
right eye.
3D emitter
[BOOK-PC7000]Web Manual-Eng.indb 19 2010-06-21 오전 10:31:45

20
English
Basic Features
■3D Auto View (Off / On): If 3D Auto View is set to On,
a “Side by Side” format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
✎ If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the 3D button or corresponding
menu.
✎ Support resolution (16:9 only)
Resolution Frequency (Hz)
1280 x 720p 60 Hz
1920 x 1080i 60 Hz
1920 x 1080p 24 / 30 / 60 Hz
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
1. Press the 콘텐츠 button, then the Content View menu
will appear.
2. Press the ◄or ►button, then select 3D.
To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3. Select OK, then press the ENTER
E button.
4. Using the ◄or ►buttons on your remote control, select
the 3D Mode of the image you want to view.
✎ Some 3D modes may not be available depending
on the format of the image source.
Supported formats and operating specifications for
Standard HDMI 3D
✎ The 3D formats indicated below are recommended by
the HDMI association and must be supported
Source signal format Standard HDMI 1.4 3D
1920x1080p@24Hz x 2 1920x2205p@24Hz
1280x720p@60Hz x 2 1280x1470p@60Hz
The mode is automatically switched to 3D in one of the
source signal formats above.
For the Standard HDMI 3D format with 24Hz, the TV is
optimized as follows:
– Judder Reduction Display Mode: When Auto
Motion Plus is set to Smooth or Custom, you can
watch a smooth picture without judder.
Before using 3D function...
✎ NOTE
x
You may notice a small amount of screen flickering
when watching 3D images in poor light conditions
(from a strobe light, etc.), or under a fluorescent lamp
(50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the
light or turn the lamp off.
x
3D mode is automatically disabled in following cases:
when changing a channel or the input source, or
accessing Media Play or Internet@TV.
x
Some Picture functions are disabled in 3D mode.
x
PIP is not supported in 3D mode.
x
3D Active Glasses from other manufacturers may not
be supported.
x
When the TV is initially powered on, may take some
time until the 3D display is optimized.
3D
OK
To watch in 3D, wear 3D glasses and
press the power button on the glasses.
Viewing 3D TV motion pictures for long
periods may cause eye fatigue and/or
dizziness.
Cancel
L Move E Enter e Exit
3D3D
Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen.
Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen.
L Move E Enter e Exit
L Move E Enter e Exit
[BOOK-PC7000]Web Manual-Eng.indb 20 2010-06-21 오전 10:31:46