Samsung PS42B450 User manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02354J-01
Plasma TV
user manual
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02 201 2418 www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
CZECH REPUBLIC 800 - SAMSUNG (800-726786) www.samsung.com/cz
DENMARK 8 - SAMSUNG(7267864)
EIRE 0818 717 100 www.samsung.com/ie
800-7267 www.samsung.com/ee
FINLAND
www.samsung.com/fi
FRANCE www.samsung.com/fr
GERMANY www.samsung.de
HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu
ITALIA 800-SAMSUNG(726-7864) www.samsung.com/it
KAZAKHSTAN
KYRGYZSTAN
LATVIA 8000-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.com/lt
LUXEMBURG www.samsung.com/lu
NETHERLANDS www.samsung.com/nl
www.samsung.com/no
0 801 1SAMSUNG(172678)
www.samsung.com/pl
80820-SAMSUNG(726-7864) www.samsung.com/pt
RUSSIA www.samsung.ru
0800-SAMSUNG(726-7864)
SPAIN www.samsung.com/es
www.samsung.com/se
Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch
TADJIKISTAN
444 77 11 www.samsung.com/tr
U.K
UKRAINE www.samsung.ua
UZBEKISTAN
2009-06-30 10:02:45
English - 2
User Instructions
Screen Image retention
retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not
install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper
part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be
prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a
game console may cause similar effect to the screen. Damages caused by the above effect are not covered by
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages.
Warranty
-
Burn-in is not covered by the warranty.-
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures,
high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may
cause a serious damage to your set.
Digital TV Notice
1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)
digital terrestrial signals are broadcasted or where you have access to a compatible DVB-C(MPEG2 and MPEG4 AAC)
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C
is that for the broadcast transmission of digital TV over cable.
3. Although this TV set meets the latest DVB-T and DVB-C standards[August,2008], the compatibility with future DVB-T digital
terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4. Some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and
conditions of their business.
5.
providers.
6. For more information, please contact your local Samsung customer care centre.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
2009-06-30 10:02:46
English
N O T
Symbol Press Note
English - 3
Contents
Connecting and Preparing Your TV
..........................................................................4
Using the Stand-Base...............................................................4
How to assemble the Stand-Base (depending on the model)...4
Viewing the Control Panel.........................................................
Viewing the Connection Panel...................................................6
Remote Control.........................................................................8
Installing Batteries in the Remote Control.................................
.................................................................
Placing Your Television in Standby Mode..................................
Viewing the Menus..................................................................10
.........................................................10
Viewing the Display.................................................................10
Plug & Play Feature................................................................ 11
Channel Control
Storing Channels...................................................................12
Managing Channels................................................................1
Picture Control
Changing the Picture Settings.................................................17
.............................................................20
Setting up the TV with your PC...............................................21
PC Display...............................................................................22
Sound Control
Changing the Sound Setting...................................................2
Selecting the Sound Mode......................................................24
Function Description
....................................................2
Setting the Time......................................................................27
SourceList / Edit Name........................................................... 28
Supported Program.................................................................28
About Anynet+
Connecting Anynet+ Devices ..................................................2
Setting Up Anynet+.................................................................0
Scanning and Switching between Anynet+Devices................0
Recording................................................................................1
Listening through a Receiver (Home theater).........................2
Troubleshooting for Anynet+..................................................2
Recommendations for Use
.......................................................................
.....................................4
................
.....................................................
Troubleshooting.......................................................................6
Securing the Installation Space...............................................6
..........................................................................7
2009-06-30 10:02:46
English - 4
Using the Stand-Base
N
The PDP can rotate 20 degrees in right and left directions.
N
How to assemble the Stand-Base (depending on the model)
Using the 4 screws for securing the stand base and the monitor, firmly attach the
monitor to the stand base.
In case of installing your TV on the wall, close the
cover (1) on the stand-base connection part using
two screws for hiding.
Warning
Firmly secure the stand to the TV before moving
it, as the stand may fall and could cause serious
injury.
Two or more people should carry the TV.
N
possible damage to the screen.
Always store the TV upright.
-20° ~ 20°
Checking Parts
Remote Control/
AAA Batteries (2ea) Power Cord Cloth-Clean
Safety Guide Manual
(Not available in all locations)
Screw (4ea) Cover-Bottom Holder-Ring (4ea)
Ferrite Core for Power
Cord (1ea)
N
core and clip it around the cable near the plug.
Connecting and Preparing Your TV
2009-06-30 10:02:49
English - 5
Viewing the Control Panel
The product colour and shape may vary depending on the model.N
Front Panel buttons
Touch each button to
operate.
1
SOURCE
Toggles between all the available input sources
(TV, Ext. AV, PC, Component, HDMI1, HDMI2/DVI, HDMI3).
In the on-screen menu, use this button as you would use
N
the ENTEREbutton on the remote control.
2
MENU
3
+ –
Press to increase or decrease the volume. In the on-screen
menu, use the + – buttons as you would use the
4
CH
Press to change channels. In the on-screen menu, use the
CH
on the remote control.
5
POWER INDICATOR
Lights up when the power is on.
6 (
POWER)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
2009-06-30 10:02:50
English - 6
Viewing the Connection Panel
N
N
The product colour and shape may vary depending on the model.N
1SERVICE1, 2
Connector for service.
2POWER IN
Connect the supplied power cord.
3COMPONENT IN
B / PR) inputs for
Component.
4PC IN(PC) / (AUDIO)
5EXT (RGB)
video game device or video disc players.
Input/Output Specification
Connector Input
Video Audio(L/R) RGB Video + Audio(L/R)
EXT ✔✔✔
is available.
6DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
73D SYNC OUT
8AUDIO OUT(AUDIO R/L)
such as Audio equipment.
9HDMI IN 1, 2(DVI)
No additional Audio connection is needed for an HDMI to
HDMI connection.
-
N
High Definition Multimedia interface- allows the
multiple channels of digital audio.
The HDMI/DVI terminal supports DVI connection to-
supplied). The difference between HDMI and DVI is
that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature
installed, and supports multi - channel digital audio.
DVI AUDIO IN
0ANT IN
Supported modes for HDMI/DVI and Component
480i 480p 720p 1080i 1080p
X X X
HDMI/DVI 60Hz X X X
Component
TV Rear Panel
Cable Television
Network
or
or
2
543 8 96
0
1
1 7
2009-06-30 10:02:51
English - 7
1
COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 26)
- serting CI CARD in some channels,
Scramble Signal is displayed on the screen.
The- pairing information containing a telephone number,
CI CARD ID, Host ID, and other information will be
displayed, please contact your service provider.
- informatio
the message Updating Completed is displayed,
indicating that the channel list is now updated.
N
CAM is not supported in some countries andN
2
HDMI IN 3
3
AV IN (VIDEO, AUDIO L/R)
camcorder or VCR.
The product colour and shape may vary depending on the model.N
TV Side Panel
2
3
1
2009-06-30 10:02:52
English - 8
Remote Control
The performance of the remote control may be affected by bright light.
N
1
(turns the TV on and off)
2
Selects the TV mode directly.
3
Number buttons for direct channel
access
4
Displays the favourites channel list.
5
Temporary sound switch-off
6
Volume increase
Volume decrease
7
Available source selection
8
Use to see information on the current
broadcast
9
functions.
0
Control the cursor in the menu
!
Used to display Channel Lists on the
screen
@
Use these buttons in the Channel list,
etc.
$
Sound mode selection
%
Use these buttons in the Channel list,
and Anynet+.
^
Previous channel
&
Previous channel
*
Displays the main on-screen menu
(
Electronic Program Guide (EPG)
display
)
Returns to the previous menu
a
b
Selects SRS TruSurround HD mode.
c
Picture size selection
d
Digital subtitle display
e
Turn the audio description function on
or off.
Teletext Functions
2
(depending on the model)
7
8
9
!
@
#
broadcast
^
&
P
P
*
)
a
2009-06-30 10:02:53
English - 9
Installing Batteries in the Remote Control
1.
2. Install two AAA size batteries.
N
the compartment.
3. Close the cover.
N
remote control for a long time.
N
1.
2.
3.
4.
5.
Switching On and Off
The mains lead is attached to the rear of your set.
1.
The standby indicator lights up on your set.
N
2. Press the POWERPbutton on your set.
Yo
Nu also can press the POWERPbutton or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. </ >) button on the remote control or < CH > button on your set.
N
4. To switch your set off, press the POWERPbutton again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to
1. Press the POWER
P
button on the remote control.
T
Nhe screen is turned off and a red standby indicator appears on your set.
2. To switch yoPOWER
P
TV button or channel up / down (</ >) button
again.
Do
N
the set from the mains and aerial.
2009-06-30 10:02:53
English - 10
Viewing the Menus
1. MENU button. The main menu appears on the
Picture, Sound, Channel, Setup, Input,
Application, Support.
2. ENTER
E
button
3. Press the EXIT
The on-screen menus disappear from the screen after about one minute.
N
Using the TOOLS Button
You can use the TOOLSTools menu changes depending on
1. Press the TOOLS button. The Tools menu will appear.
2. ENTER
E
button.
3. ENTER
E
buttons to display, change, or use the selected
items. For a more detailed description of each function, refer to the corresponding
page.
Anynet+
Picture Mode, see page 17
Sleep Timer, see page 27
Energy Saving, see page 26
Auto Adjustment, see page 21
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
Press the
OINFO button to viewing the information.
Press the INFO button on the remote control. The TV will display the channel, the type of
sound, and the status of certain picture and sound settings.
selected channel, press ENTER
E
button.
Press the
NINFO
disappears automatically.
DTV Air
15
abc1
18:1 1 Thu 6 Jan
Life On Venus Avenue
Unclassified
No Detaild Information
E Watch
'Information
Mode : Standard
Picture
Tools
Anynet+ (HDMI-CEC)
Add to Favourite
U
Move
E
Enter
e
2009-06-30 10:02:54
English - 11
Plug & Play Feature
N
N
1. Press the POWER button on the remote control. You can set the menu language. menu is automatically displayed. Select the
Press the ENTER
E
2. Store Demo or Home Use, then the ENTER
E
button.
NHome Use mode for the best picture in your home
environment.
Store Demo
Nmode is only intended for use in retail environments.
If the unit is accidentally set to
NStore Demo mode and you want to return to Home Use
MENU
3. Press the ENTER
E
ENTER
E
your choice.
4. ENTER
E
button.
Air:Air antenna signal.
Cable:Cable antenna signal.
5. ENTER
E
button to select Start.
Digital & Analogue and Analogue channels.
Digital channels.
Analogue
For more de
Ntailed description of selecting Cable mode,, refer to page 12.
The
Nchannel search will start and end automatically.
Pr
Ness the ENTERE
button at any time to interrupt the memorization process.
A
Nfter all the available channels are stored, the message Set the Clock Mode. is displayed.
6. Press the ENTER
E
Auto, then Press the ENTER
E
button.
If
Nyou select Manual, Set current date and time is displayed. (refer to page 27)
If
Nyou have received a digital signal, the time will be set automatically. If not, see page 27
7. The brief instruction on How to get the best performance from your new HDTV.is displayed. Press the ENTER
E
button.
Th
Nis menu is available HD Connection Guide in the Support menu.
8. The message Enjoy your TVENTER
E
button.
If you want to reset this feature...
1. Press the MENUSetup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3.
N
TheNPlug & Play feature is only available in the TV mode.
Setup
Plug & Play
Time
Broadcast
Security
General
Plug & Play
You can set the menu language.
U
Move
E
Enter
Nederlands
English
Eesti
2009-06-30 10:02:54
English - 12
Storing Channels
Country
❑
Digital Channel
Analogue Channel
The PIN number input screen appears. Enter your 4 digit PIN number.N
Auto Store
❑Scans for all channels with active broadcast stations (and availability depends on your
country) and stores them in the TV's memory.
You can memorize the channels of the selected connection.
Air
Cable
N
Search Mode Quick)
Network ID-
Frequency-
Modulation-
Symbol Rate-
Search Mode Full, Network)
Frequency (Start~Stop)-
Modulation-
Symbol Rate-
You can memorize the Channel source
Digital & Analogue
Digital
Analogue
If you want to stop
NAuto Store, press the ENTERE
button.
The
NStop Auto Store? message will be displayed.
Select
NYesENTERE
button.
NChild Lock function, the PIN input window appears.
Channel Control
Continued...
Channel
Country
Auto Store
Manual Store
Full Guide
2009-06-30 10:02:54
English - 13
Manual Store
❑
Digital Channel (Digital)
Manual store for digital channels.
Digital Channel is only available in DTV mode.
N
Channel 0~9) buttons.
Frequency
Bandwidth 0~9) buttons.
N
Analogue Channel
Manual store for analogue channel.
Programme
buttons.
Sound System BG / L / I / DK
Channel C(Air channel) or S
0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (
N0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
N
Search
Store OK by pressing the ENTERE
button.
Channel mode
N
C-
mode.
S-
Cable Search Options (Cable)
❑
Frequency (Start~Stop)
Modulation
Symbol Rate
Set the
NFrequency (Start~Stop) and Symbol Rate using the number (0~9) buttons.
Now & Next Guide / Full Guide
❑
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
Now & Next Guide
programme information.
Full Guide
Continued...
2009-06-30 10:02:54
English - 14
Default Guide
❑
Now/Next / Full Guide
You can decide whether to display either the Now/Next or
the Full Guide when the GUIDE button on the remote control is pressed.
You can also display the guide menu simply by pressing the
OGUIDE button.
Using the Now & Next Guide / Full Guide
(ENTER)
ENTEREbutton is
Cancel Schedules, the scheduling is canceled with the
For details about scheduling programmes, refer to the section.
RED Toggle between the Now/Next or Full Guide.
GREEN Full Guide
YELLOW Full Guide
BLUE
INFO
INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video
summary is long.
Channel List
❑For the detailed procedures on using the Channel List
Channel Mode
❑</>button, Channels will be switched within the selected channel list.
Added Ch.
Favourite Ch.
Fine Tune
❑(only analogue channels)
N*on the right-hand side of the channel number in the
channel banner.
N
NResetENTERE
button.
Channel
Full Guide
Default Guide : Now/Next
Channel List
Fine Tune
Full Guide
No Detailed Information
Today
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
Street Hypn..
Kisstory
No Information
No Information
No Information
Information
Page
No Detailed Information
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
Street Hypn..
Kisstory
No Information
No Information
No Information
Information
Page
Full Guide
Now
2009-06-30 10:02:55
English - 15
Managing Channels
Using this menu, you can Add / Delete or set Favourite channels and use the programme
guide for digital broadcasts.
Select a channel in the
NAll Channels, Added Channels, Favourites, or Programmed
ENTEREbutton.
Then you can watch the selected channel.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favourites
Shows all favourite channels.
Programmed
Shows all current reserved programmes.
Using the Colour buttons with the Channel List
NRed (- Channel Type): Toggle between your TV, Radio, Data/Other and All.
Green (- Zoom)
Yellow (- Select)
T-TOOLS (Tools)Delete (or Add), Add to Favourite (or Delete from
Favourite), Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Lock
(or Unlock), Select All (or Deselect All),or Auto Store menu.
Channel Status Display Icons
N
AAn Analogue channel. cA channel selected by pressing the yellow button.
A channel set as a Favourite. (A programme currently being broadcast.
\ )A reserved programme
Press theOCH LIST button on the remote control to bring up the channel lists.
Channel List Tools Menu (in All Channels / Added Channels /
❑Favourites)
Press theNTOOLS button to use the Tools menu.
N
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on
NAll Channels menu.
A gray-coloured channel indicates the channel has been deleted.
N
TheNAdd menu only appears for deleted channels.
You can also delete a channel to the
NAdded Channels or Favourite menu in the
same manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
Press theTTOOLS button to display Tools menu.
You can also add the favourite channel by selecting ToolsAdd to Favourite (or Delete from Favourite).
N
All favourite channels will be shown onNFavourite menu.
To select the Favourite channels you have set up, press the
OFAV.CH button on the
remote control.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
N
You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.N
Reserving a programme will be shown onNProgrammed menu.
Digital Programme Guide and Viewing Reservation
N
You can reserve a programme according to the procedures described above.
Channel
Full Guide
Channel List
Fine Tune
824 UKTV Gold
A
1 C --
A
2 C
--
A
C
--
A
4 C
--
A
--
A
6 C
--
A
7 C
--
A
8 C
--
Added Channels
All
Channel Type
Zoom
Select
Tools
824 UKTV Gold
A
1 C --
A
2 C
--
A
C
--
A
4 C
--
A
--
A
6 C
--
A
7 C
--
A
8 C
--
All Channels
All
Channel Type
Zoom
Select
Tools
Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Continued...
2009-06-30 10:02:56
English - 16
Edit Channel Name(only analogue channel)
Channels can labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.N
Edit Channel Number(only digital channel)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort(only analogue channel)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
Lock / Unlock
Child Lock is
set to on
The PIN nu
Nmber input screen appears. Enter your 4 digit PIN number.
N.You can change the PIN, by selecting Change PIN from the menu.
The
N\
Select All / Deselect All
Select All
Deselect Al
N
the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
The
Nc
You can only select
NDeselect All when there is a selected channel.
Auto Store
For further details on setting up options, refer to page 12.N
NChild Lock function, the PIN input window appears.
Channel List Option Menu (in Programmed)
❑You can view, modify or delete a reservation.
Press the
NTOOLS button to use the option menu.
Change Info
Cancel Schedules
Information
(You can also change the reservation information.)
SelectAll
Programmed
Quincy, M.E
The Equalizer
Change Info
Cancel Schedules
Information
Select All
All
Zoom
Select
Tools
Information
2009-06-30 10:02:56
English - 17
Changing the Picture Settings
Mode
❑You can select the type of picture which best corresponds to your viewing requirements.
Dynamic
Standard
Movie
Press the
TTOOLS button to display Tools menu.
You can also set the picture mode by selecting .
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
❑Your television has several setting options that allow you to control the picture quality.
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
N
NCell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R)
accordingly.
N
InNPCCell Light, Contrast and Brightness.
N
N
will reduce the overall running cost.
Advanced Settings
❑
previous models. See below to adjust detailed picture settings.
Advanced Settings
Nis available in Standard or Movie mode.
NGamma and White Balance from
among the Advanced Settings items.
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (Red, Green, Blue) Intensity.
Colour Space
most natural colour.
Auto Automatically sets the colour range depending on the input video source.
Native Sets a colour range wider than that of the input video source.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain
Reset
Flesh Tone
Changing the adjustment value will refresh the adjusted screen.
N
You can emphasize object boundaries in the picture.
Picture Control
Continued...
Mode : Standard
Picture
Advanced Settings
Picture Reset
Picture
2009-06-30 10:02:56
English - 18
Picture Options
❑InNPCColour Tone, Size and Screen
Burn Protection from among the items in Picture Options.
Colour ToneCool / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
NPicture mode.
Warm1
Nor Warm2 is only activated when the picture mode is Movie.
Size
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide
16:9
Wide Zoom
vertically.
Zoom
4:3
Screen Fit
The picture size options may vary depending on the input source.
The items available may differ depending on the selected mode.
N
InNPC Mode, only 16:9 and 4:3 mode can be adjusted.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.N
Wide ZoomNPosition, then press the ENTERE
button.
ENTERE
button.
Zoom
NPosition, then press the ENTERE
up and down. Then press the ENTERE
Size, then press the ENTERE
button. Press the
ENTERE
button.
After selecting
NScreen Fit in HDMI (1080i / 1080p) or Component Position by pressing
Reset
NReset, then press the ENTERE
button. You can initialize the setting.
If you use the
NScreen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.
You can select these options simply by pressing the
OP.SIZE button on the remote
control.
Screen Mode
Auto Wide
intended for users to select it.
16:9
Wide Zoom
vertically.
Zoom
4:3
This function is available in
NAuto Wide mode.
This function is not available in
NPC, Component or HDMI mode.
Digital NROff / Low / Medium / High / Auto
and ghosting that may appear on the screen.
N
HDMI Black LevelNormal / Low
N
Continued...
Advanced Settings
Picture Options
Picture Reset
Picture
2009-06-30 10:02:57
English - 19
Film Mode
You can optimize the picture mode for watching movies.
Off
Auto
Screen Burn Protection
Pixel Shift
technology enables you to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to
program the time between movement of the picture in minutes.
Set
NPixel ShiftENTEREbutton.
NENTEREbutton.
NHorizontal, Vertical, Time.
N
Item TV/Ext/AV/Component/HDMI/PC
Horizontal 0~4 2
Vertical 0~4 2
Time (minute) 1~4 min
N
This function is not available in the
NScreen Fit mode.
Scrolling
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
Side Grey
Dark-
Light-
2009-06-30 10:02:57
English - 20
Using the 3D Function
Connections
❑
1.
2.
computer.
3.
4. Turn the TV on and set the source of the TV to HDMI2/DVI.
N
Adjust the PC resolutionN
N
N
It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.
N
NOff) and the Format is saved.
N
N
N
N
N
lamp to watch the screen for its best condition.
N
3D Glasses
(Not supplied)
3D IR Emitter
(Not supplied)
PC
TV Rear Panel
2
HDMI/DVI Cable (Not supplied)
1
Continued...
2009-06-30 10:02:58
Other manuals for PS42B450
1
This manual suits for next models
3
Table of contents
Languages:
Other Samsung Plasma TV manuals
Samsung
Samsung PS51D8005 User manual
Samsung
Samsung PS-42E71HD User manual
Samsung
Samsung HPS5033X User manual
Samsung
Samsung PN58B650 User manual
Samsung
Samsung PL43E450 User manual
Samsung
Samsung PS42B450B User manual
Samsung
Samsung PN63A650T1F User manual
Samsung
Samsung 4 Series User manual
Samsung
Samsung 4550 User manual
Samsung
Samsung PN42C430A1D User manual
Samsung
Samsung PN59D530 User manual
Samsung
Samsung BN68-02577B-06 User manual
Samsung
Samsung BN68-01416A-00 User manual
Samsung
Samsung PS50A566S2W User manual
Samsung
Samsung Series 4+ User manual
Samsung
Samsung PN60F5500AF User manual
Samsung
Samsung 5 Series User manual
Samsung
Samsung DIGIMAX 4500 User manual
Samsung
Samsung SYNCMASTER PS50B430P User manual
Samsung
Samsung HPS5073X/XAA User manual
