Samsung PS43D451 User manual

Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________Serial No. _____________
E-MANUAL
© 2011 Samsung Electronics Co., Ltd. All rights reserved. BN68-03493A-01
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRALIA 1300 362 603 www.samsung.com
NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com
CHINA 400-810-5858
010-6475 1880
www.samsung.com
HONG KONG (852) 3698-4698 www.samsung.com/hk
www.samsung.com/hk_en/
INDIA 3030 8282
1800 110011
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA 0800-112-8888
021-5699-7777
www.samsung.com
JAPAN 0120-327-527 www.samsung.com
MALAYSIA 1800-88-9999 www.samsung.com
PHILIPPINES 1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
www.samsung.com
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com
THAILAND 1800-29-3232
02-689-3232
www.samsung.com
TAIWAN 0800-329-999 www.samsung.com
VIETNAM 1 800 588 889 www.samsung.com
[PD450-XY]BN68-03493A.indb 1 2011-01-27 오전 12:04:04

English - 2
For more information on how to use e-Manual
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
User Instructions
•Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several
minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To
avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a
still image.
•Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through
the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
•The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
•Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require
sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
•Avoid operating the TV at temperatures below 41°F (5°C)
•A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and centre of the screen caused by the difference of light emission on
the screen. Playing a DVD or a game console may cause similar effects to the screen.
Damages caused by the above effect are not covered by the Warranty.
•After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial
after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.
•Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of
the product.
✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury
due to the product falling.
✎ The appearance may differ depending on the product.
✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
10 cm10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
[PD450-XY]BN68-03493A.indb 2 2011-01-27 오전 12:04:04

English - 3
Accessories
✎ Please make sure the following items are included with your TV. If any items are missing, contact your
dealer.
✎ The items’ colours and shapes may vary depending on the models.
✎ Check that there is no accessory hidden behind packing materials when you open the box.
[
CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
•Remote Control & Batteries (AAA x 2) •Power Cord
•Owner’s Instructions •Cleaning-Cloth
•Warranty Card (Not available in some locations) / Safety Guide
✎ 43 inch model
Ferrite Core (2EA)
✎ Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from
interference. When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the figure.
•A Minimum distance between the ferrite core and the end of the cord inserted in the
TV: 8 inches
•B Maximum distance between the ferrite core and the other end of the cord inserted
in the AC outlet: 3/4 inch Power Cord
✎ 51 inch model
Ferrite Core (2EA) Ferrite Core (1EA)
✎ Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from
interference. When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the figure.
•A Minimum distance between the ferrite core and the end of the cord inserted in the
TV: 8 inches
•B Maximum distance between the ferrite core and the other end of the cord inserted
in the AC outlet: 3/4 inch Power Cord
✎ Ferrite Core : The ferrite cores are used to shield the cables from interference. When
connecting a cable, open the ferrite core and clip it around the cable near the plug as
shown in the figure.
Antenna Cable/
Component Cable
(sold separately)
B
A
B
A
[PD450-XY]BN68-03493A.indb 3 2011-01-27 오전 12:04:05

English - 4
Viewing the Control Panel
✎ The product colour and shape may vary depending on the model.
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use
this button as you would use the ENTER E button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s
features.
y Adjusts the volume. In the OSD, use the y buttons as you would use
the ◄ and ► buttons on the remote control.
z Changes the channels. In the OSD, use the z buttons as you
would use the ▼ and ▲ buttons on the remote control.
P (Power) Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).
A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug
the power cord.
Control Panel
[PD450-XY]BN68-03493A.indb 4 2011-01-27 오전 12:04:05

English - 5
Viewing the Remote Control
✎ This is a special remote control for the visually impaired and has Braille points on the Channel and Number
buttons.
Installing batteries (Battery size: AAA)
Turns the TV on and off. Displays and selects the available video
sources.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen.
Displays the EPG (Electronic Programme
Guide).
Displays information on the TV screen.
u / d / l / r : Move the cursor on-screen
menu item.
ENTER E : Selects the menu and
changes the corresponding item value.
Exits the menu.
Have direct access to channels.
Adjusts the volume.
Alternately select Teletext ON, Double,
Mix or OFF.
Opens the OSD.
Quickly select frequently used functions.
Displays the Content Home, which
includes Watch TV, My Downloads and
Source.
Returns to the previous menu.
These buttons are for the Channel
Manager, My Downloads menu, etc.
Use these buttons in My Downloads
and Anynet+ (HDMI-CEC) modes.
(The Ă button also controls recording
for Samsung recorders that have the
Anynet+ (HDMI-CEC).)
P.MODE: Press to select the Picture
Mode.
SRS: Selects the Sound Mode.
DUAL f−g: Sound effect selection.
AD/SUBT.: Turns the audio description on
and off (not available in some locations). /
Displays digital subtitles.
P.SIZE: Selects the Picture Size.
E-MANUAL: Displays the e-Manual.
[PD450-XY]BN68-03493A.indb 5 2011-01-10 오후 2:56:56

English - 6
Changing the Input Source
Source
Use to select TV or an external input
sources such as a DVD / Blu-ray player /
cable box /STB satellite receiver.
■TV / AV / Component1 /
Component2 / PC / HDMI1/DVI /
HDMI2 / USB
✎ In the Source, connected inputs will
be highlighted.
✎ PC always stay activated.
✎ If the connected external devices are not
highlighted, press the red button. The TV will
search for connected devices.
Edit Name
In the Source, press the TOOLS button, and then you
can set an external input sources name you want.
■VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC /
DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD
DVD / DMA: Name the device connected to the
input jacks to make your input source selection
easier.
✎ When connecting a PC to the HDMI IN 1 (DVI)
port with HDMI cable, you should set the TV to
PC mode under Edit Name.
✎ When connecting a PC to the HDMI IN 1 (DVI)
port with HDMI to DVI cable, you should set the
TV to DVI PC mode under Edit Name.
✎ When connecting an AV devices to the HDMI IN 1
(DVI) port with HDMI to DVI cable, you should set
the TV to DVI Devices mode under Edit Name.
Information
You can see detailed information about the selected
external device.
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Connecting the power cord and antenna.
✎ The PDP device may interfere with an amateur radio or AM radio.
✎ When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this
may cause the TV to malfunction.
VHF/UHF AntennaCable
Power Input
or
[PD450-XY]BN68-03493A.indb 6 2011-01-27 오전 12:04:06

English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWER P button. Plug & Play is available only when the Source is set to TV.
✎ Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎ To return to the previous step, press the Red button.
1Selecting Store
Demo or Home Use
Press the ◄ or ► button, then press the ENTER
E button.
Select the Home Use mode. Store Demo mode is for retail
environments.
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
Store Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home Use when you
watch at home.
2Selecting a Country Press the ▲ or ▼ button, then press the ENTER
E button. Select the
appropriate country.
✎ After selecting the Country in the Country menu, some models may proceed
with an additional option to setup the pin number.
When you input the PIN number, “0-0-0-0” is not available.
3Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Auto: Allows you to select a time zone.
✎ Press the ▲ or ▼ button to highlight the time zone for your local area. Press
the ENTER E button. (Australia only)
Manual: Allows you to manually set the current date and time.
4Selecting and
memorising channels
Select the channel search option to memorise. Press the
l or r button to
select Digital & Analogue, Digital or Analogue, and then press ENTER E . A
check appears on your selection. Select Next, and then press the ENTER E
button. The channel search will start. For more information, refer to “Channel →
Memorising Channels” in the e-Manual.
Press the ENTER
E button at any time to interrupt the memorisation process.
5Enjoy your TV. Press the ENTER
E button.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU → System) again at home although you did in shop.
P
POWER
[PD450-XY]BN68-03493A.indb 7 2011-01-27 오전 12:04:07

English - 8
Connecting to an AV devices
¦¦
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite
receiver, VCR
Using an HDMI or an HDMI to DVI cable (up to 1080p)
✎ HDMI IN 1 (DVI), 2 / PC/DVI AUDIO IN
x
When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack for video. A DVD
player, Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to
HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI IN jack is required for audio.
x
The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
x
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
W
R
HDMI connection
HDMI to DVI connection
[PD450-XY]BN68-03493A.indb 8 2011-01-27 오전 12:04:07

English - 9
Using a Component (up to 1080p) or an Audio/Video (480i only) Cable
✎ When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable
(yellow).
✎ To obtain the best picture quality, the Component connection is recommended over the A/V
connection.
AUDIO OUT
R-AUDIO-L
VIDEO OUT
AUDIO OUT
R-AUDIO-L
PRPBG
COMPONENT OUT
Component connection
AV connection
[PD450-XY]BN68-03493A.indb 9 2011-01-27 오전 12:04:07

English - 10
Connecting to a PC and Audio device
¦Available devices: digital audio system, amplifier, DVD home theatre, PC
Using an Optical (Digital) or an Audio (Analog) Cable Connection
✎ DIGITAL AUDIO OUT (OPTICAL)
x
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the
volume of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-
Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎ AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and
adjust the volume level with the amplifier’s volume control.
AUDIO IN
R-AUDIO-L
OPTICAL
Audio connection
DVD home theatre connection
[PD450-XY]BN68-03493A.indb 10 2011-01-27 오전 12:04:08

English - 11
¦Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
✎ Connecting through the HDMI cable may not be supported depending on the PC.
Display Modes (D-Sub and an HDMI to DVI Input)
Optimum resolution:
•PS43D450, PS43D451: 1024 X 768 @ 60Hz
•PS51D450, PS51D451: 1360 X 768 @ 60Hz
Mode Resolution Horizontal
Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)
PS43D450
PS43D451
PS51D450
PS51D451
IBM 640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
>
>
>
>
MAC 640 x 480
832 x 624
35.000
49.726
66.667
74.551
30.240
57.284
-/-
-/-
>
>
>
>
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
85.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
✎ NOTE
x
For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
x
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
DVI OUT
AUDIO OUT AUDIO OUT
PC OUT HDMI OUT
PC connection
[PD450-XY]BN68-03493A.indb 11 2011-01-27 오전 12:04:09

English - 12
How to view the e-Manual
Screen Display
How to toggle between the e-Manual and the corresponding menu(s).
✎ This function is not enabled in some menus.
Method 1 Method 2
1. If you want to use the menu that corresponds to
an e-Manual topic, press the red button to select
Try Now.
2. To return to the e-Manual screen, press the
E-MANUAL button.
1. Press the ENTER
E button when selecting
Contents Area. The “Are you sure?” is displayed.
Select Yes and then press the ENTER E button.
The OSD window will be displayed.
2. To return to the e-Manual screen, press the
E-MANUAL button.
You can read the introduction and instructions about the TV features stored
in your TV.
O MENU m → Support → e-Manual → ENTER E
✎ If you want to return to e-Manual, press E-MANUAL button on remote.
✎ You can’t use the Try Now function, if the menu is not activated.
TV Screen: Displays the current input
source screen.
Change the category. Press
l or r
button to select category you want.
Displays the sub-menu list. Press
ENTER
E button to select sub-
menu you want.
Operation Buttons:
} Blue (Index): Displays index screen.
E Enter: Select a category or sub-menu.
e Exit: Exit the e-Manual.
E-MANUAL
Try Now
E-MANUAL
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
} Index E Enter e Exit
Changing the Preset Picture Mode
■
Picture Mode t
Select your preferred picture type.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural
for LED TV
/ Relax
for PDP TV
: Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
NIt is only available in PC mode.
Changing the Preset Picture Mode
OMENU m → Picture → Picture Mode → ENTER E
■
Picture Mode
Select your preferred picture type.
NIn PC mode, you can only select Entertain and Standard.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Relax: Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
Basic Features > Changing the Preset Picture Mode (1/1)
a Try Now b Home { Zoom } Index L Page e Exit
Picture
Picture Mode : Standard r
Cell Light : 10
Contrast : 100
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Screen Adjustment
[PD450-XY]BN68-03493A.indb 12 2011-01-27 오전 12:04:11

English - 13
Viewing the Contents
Using the Zoom mode
When you view the e-Manual instruction, press the
yellow button to magnify the screen. You can scroll
through the magnified screen by using the
u or d
buttons.
✎ To return to the previous screen, press the RETURN
button.
How to search a keyword by using index page
✎ This function may not support depending on the language.
1. If you want to search a keyword, press the blue button to select Index.
2. Press the
l or r button to select a character order you want, and then press the ENTER E button.
3. Press the
u or d button to select a keyword you want to see, and then press the ENTER E button.
4. You can view the corresponding e-Manual instruction screen.
✎ To close the Index screen, press the Return button.
Contents Area: You can view the corresponding
contents, if you selected a sub-menu. To move
previous or next page, press the l or r button.
Operation Buttons:
a Red (Try Now): Displays the corresponding menu(s).
b Green (Home): Moves to the e-Manual home screen.
{ Yellow (Zoom): Magnifies a screen.
} Blue (Index): Displays index screen.
L (Page): Moves to previous or next page.
a Try Now b Home { Zoom } Index L Page e Exit
Basic Features > Changing the Preset Picture Mode (1/1)
Changing the Preset Picture Mode
OMENU m → Picture → Picture Mode → ENTER E
■
Picture Mode
Select your preferred picture type.
NIn PC mode, you can only select Entertain and Standard.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Relax: Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
k¦ Move ¦¦¦R Return
Changing the Preset Picture Mode
OMENU m → Picture → Picture Mode → ENTER E
■
Picture Mode
Select your preferred picture type.
NIn PC mode, you can only select Entertain and Standard.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Relax: Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
[PD450-XY]BN68-03493A.indb 13 2011-01-27 오전 12:04:12

English - 14
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect
to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎ The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials,
please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal
injury.
✎ NOTE
x
Standard dimensions for wall mount kits are shown in the table below.
x
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly
are provided.
x
Do not use screws that do not comply with the VESA standard screw specifications.
x
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard
screw specifications. Screws that are too long may cause damage to the inside of the TV set.
x
For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
x
Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
x
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
x
Do not mount the TV at more than a 15 degree tilt.
Product Family inches VESA Spec.
(A * B) Standard Screw Quantity
PDP-TV 43~51 400 X 400 M8 4
59~64 600 X 400
✎ Unscrew the hole around before installing Wall-Mount on the wall.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury
due to electric shock.
[PD450-XY]BN68-03493A.indb 14 2011-01-27 오전 12:04:12

English - 15
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please
visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this
manual.
Issues Solutions and Explanations
The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “Remote control does not work” below.
There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the
SAMSUNG TV code.
✎ Some of above pictures and functions are available at specific models only.
✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com →
Support → Downloads) by USB.
Licence
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be
viewed without a cable box / STB (Set-Top-Box) satellite receiver.
Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote.
My Downloads
Allows you to play music files, pictures, and movies saved on a USB device.
[PD450-XY]BN68-03493A.indb 15 2011-01-27 오전 12:04:13

English - 16
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure
that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions provided in the included Safety
Flyer. For added stability and safety, install the anti-fall device as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎ You may need additional material such as an anchor depending on
the type of wall.
✎ Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎ Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
✎ NOTE
x
Install the TV near to the wall so that it does not fall backwards.
x
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
clamps fixed on the TV.
x
Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If
you have any doubt about the security of your connections, contact a professional installer.
Storage and Maintenance
✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please
clean it to watch TV.
Do not spray water or a cleaning agent directly onto
the product. Any liquid that goes into the product may
cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small
amount of water.
Wall
[PD450-XY]BN68-03493A.indb 16 2011-01-27 오전 12:04:13

English - 17
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Stand Swivel (Left / Right) 0˚
Model Name PS43D450
PS43D451
PS51D450
PS51D451
Screen Size 43 inches 51 inches
Sound
(Output) 10 W X 2
Dimensions (WxDxH)
Body
With stand
1011.8 X 56.0 X 622.4mm
1011.8 X 250 X 698.7mm
1187.8 X 56.0 X 706.6mm
1187.8 X 250.0 X 782.9mm
Weight
Without Stand
With Stand
16.0 kg
19.0 kg
22.5 kg
25.5 kg
Display Resolution 1024 X 768 1360 X 768
✎ Design and specifications are subject to change without prior notice.
✎ For information about power supply, and more about power consumption, refer to the label attached to the
product.
[PD450-XY]BN68-03493A.indb 17 2011-01-27 오전 12:04:13