Samsung DA99-02318T-00 User manual

Refrigerator
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
English
Free Standing Appliance
This manual is made with 100 % recycled paper.
DA99-02318T-00.indb 1DA99-02318T-00.indb 1 14. 6. 10.  8:2514. 6. 10.  8:25

2_ safety information
safety information
SAFETY INFORMATION
• Before operating the
appliance, please read this
manual thoroughly and
retain it at a safe place near
the appliance for your future
reference.
• Use this appliance only for
its intended purpose as
described in this instruction
manual. This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
• Warnings and Important
Safety Instructions in this
manual do not cover all
possible conditions and
situations that may occur. It
is your responsibility to use
common sense, caution,
and care when installing,
maintaining, and operating
your appliance.
• Because these following
operating instructions
cover various models, the
characteristics of your
refrigerator may differ slightly
from those described in this
manual and not all warning
signs may be applicable.
If you have any questions
or concerns, contact your
nearest service center or find
help and information online
at www.samsung.com.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved.
Children shall not play with
DA99-02318T-00.indb 2DA99-02318T-00.indb 2 14. 6. 10.  8:2514. 6. 10.  8:25

safety information _3
the appliance.
Cleaning and user
maintenance shall not be
made by children without
supervision.
Important safety symbols
and precautions :
WARNING
Hazards or unsafe
practices that may
result in severe
personal injury or
death.
CAUTION
Hazards or unsafe
practices that may
result in minor
personal injury or
property damage.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions
carefully.
Unplug the power
plug from the wall
socket.
Make sure the
machine is grounded
to prevent electric
shock.
Call the contact
center for help.
Note.
These warning signs are here
to prevent injury to you and
others.
Please follow them carefully.
After reading this section, keep
it in a safe place for future
reference.
CE Notice
This product has been
determined to be in
compliance with the Low
Voltage Directive(2006/95/
EC), the Electromagnetic
Compatibility Directive
(2004/108/EC), RoHS Directive
(2011/65/EU), Commission
Delegated Regulation (EU)
No 1060/2010 and the Eco-
Design Directive(2009/125/EC)
implemented by Regulation (EC)
No 643/2009 of the European
Union. (For products sold in
European Countries only)
DA99-02318T-00.indb 3DA99-02318T-00.indb 3 14. 6. 10.  8:2514. 6. 10.  8:25

4_ safety information
SEVERE WARNING
SIGNS FOR
TRANSPORTATION
AND SITE
• When transporting and
installing the appliance,
care should be taken to
ensure that no parts of
the refrigerating circuit
are damaged.
- Refrigerant leaking from the
pipe work could ignite or
cause an eye injury. If a leak
is detected, avoid any naked
flames or potential sources
of ignition and air the room
in which the appliance is
standing for several minutes.
• In order to avoid the creation
of a flammable gas-air
mixture if a leak in the
refrigerating circuit occurs,
the size of the room in which
the appliance may be sited
depends on the amount of
refrigerant used.
• Never start up an appliance
showing any signs of
damage. If in doubt, consult
your dealer. The room
where the refrigerator will
WARNING
be sited must be 1m³
in size for every 8g of
R600a refrigerant inside the
appliance. The amount of
refrigerant in your particular
appliance is shown on the
identification plate inside the
appliance.
SEVERE WARNING
SIGNS FOR
INSTALLATION
• Do not install the
refrigerator in a damp
place or place where it
may come in contact
with water.
- Deteriorated insulation of
electrical parts may cause
an electric shock or fire.
• Do not place this refrigerator
in direct sunlight or expose
to the heat from stoves,
room heaters or other
appliance.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should
always be plugged into its
WARNING
DA99-02318T-00.indb 4DA99-02318T-00.indb 4 14. 6. 10.  8:2514. 6. 10.  8:25

safety information _5
own individual electrical
which has a voltage rating
that matched the rating
plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock of fire.
• Do not use a cord that
shows cracks or abrasion
damage along its length or
at either end.
• Do not bend the power cord
excessively or place heavy
articles on it.
• Do not use aerosols near the
refrigerator.
- Aerosols used near the
refrigerator may cause an
explosion or fire.
• This refrigerator must
be properly installed
and located in
accordance with the
manual before it is
used.
• Connect the power plug in
proper position with the cord
hanging down.
-If you connect the power
plug upside down, wire can
get cut off and cause fire or
electric shock.
• Make sure that the power
plug is not squashed or
damaged by the back of the
refrigerator.
• When moving the
refrigerator, be careful not
to roll over or damage the
power cord.
- This constitutes a fire
hazard.
• The appliance must be
positioned so that the plug is
accessible after installation.
• The refrigerator must
be grounded.
- You must ground the
refrigerator to prevent any
power leakages or electric
shocks caused by current
leakage from the refrigerator.
• Never use gas pipes,
DA99-02318T-00.indb 5DA99-02318T-00.indb 5 14. 6. 10.  8:2514. 6. 10.  8:25

6_ safety information
telephone lines or other
potential lightening rods as
ground.
- Improper use of the ground
plug can result in electric
shock.
• If the power cord is
damaged, have it
replaced immediately
by the manufacturer or
its service agent.
• The fuse on the refrigerator
must be changed by a
qualified technician or
service company.
- Failing to do so may result
in electric shock or personal
injury.
CAUTION SIGNS FOR
INSTALLATION
• Keep ventilation
opening in the
appliance enclosure or
mounting structure
clear of obstruction.
• Allow the appliance to stand
for 2 hours after installation.
CAUTION
SEVERE WARNING
SIGNS FOR USING
• Do not insert the power
plug with wet hands.
• Do not store articles on the
top of the appliance.
- When you open or close the
door, the articles may fall
and cause personal injury
and/or material damage.
• Do not put items filled with
water on the refrigerator.
- If spilled, there is a risk of fire
or electric shock.
• Do not let children hang on
the door.
-Failure to do so may cause
serious personal injury.
• Do not leave the doors of
the refrigerator open while
the refrigerator is unattended
and do not let children enter
inside of the refrigerator.
-There is a risk of children
entrapment and serious
personal injury because of
low temperature.
• Never put fingers or other
objects into the dispenser
hole.
WARNING
DA99-02318T-00.indb 6DA99-02318T-00.indb 6 14. 6. 10.  8:2514. 6. 10.  8:25

safety information _7
-Failure to do so may cause
personal injury or material
damage.
• Do not store volatile or
flammable substances such
as benzene, thinner, alcohol,
ether or LP gas in the
refrigerator.
-The storage of any of
such products may cause
explosions.
• Do not store low
temperature-sensitive
pharmaceuticals products,
scientific materials or other
low temperature-sensitive
products in the refrigerator.
-Products that require
strict temperature controls
must not be stored in the
refrigerator.
• Do not place or use
electrical appliance inside
the refrigerator, unless they
are of a type recommended
by the manufacturer.
• Do not use a hair dryer
to dry the inside of the
refrigerator. Do not place
a lighted candle in the
refrigerator for removing bad
odors.
- This may result in electric
shock or fire.
• Do not touch the inside walls
of the freezer or products
stored in the freezer with wet
hands.
- This may cause frostbite.
• Do not use mechanical
devices or any other means
to accelerate the defrosting
process, other than those
recommended by the
manufacturer.
• Do not damage the
refrigerant circuit.
• This product is
intended only for the
storage of food in a
domestic environment.
• Bottles should be stored
tightly together so that they
do not fall out.
• If a gas leak is detected,
avoid any naked flames or
potential sources of ignition
and air the room in which
the appliance is standing for
several minutes.
• Use only the LED Lamps
DA99-02318T-00.indb 7DA99-02318T-00.indb 7 14. 6. 10.  8:2514. 6. 10.  8:25

8_ safety information
provided by manufacturer or
service agents.
• Children should be
supervised to ensure that
they do not play with and/or
climb into the appliance.
• Do not disassemble or
repair the refrigerator
by yourself.
- You run risk of causing a
fire, malfunction and/or
personal injury. In case of
malfunction, please contact
your service agents.
• If the appliance
generates a strange
noise, a burning or
smell or smoke, unplug
the power plug
immediately and
contact your nearest
service center.
- Failing to do so may result
in electric or fire hazards.
Keep ventilation opening in
the appliance enclosure or
mounting structure clear of
obstruction.
• If you experience difficulty
when changing the light,
contact service agents.
• If the products equipped
with LED Lamp, do not
disassemble Lamp Cover
and LED Lamp by yourself.
- Please contact your service
agents.
• If any dust or water is in
refrigerator, pull out power
plug and contact your
Samsung Electronics service
center.
- There is a risk of fire.
CAUTION SIGNS FOR
USING
• To get best
performance of
product,
- Do not place foods too
closely in front of the vents
at the rear of the appliance
as it can obstruct free air
circulation in the refrigerator
compartment.
-Wrap the food up properly
or place it in airtight
containers before put it into
the refrigerator.
CAUTION
DA99-02318T-00.indb 8DA99-02318T-00.indb 8 14. 6. 10.  8:2514. 6. 10.  8:25

safety information _9
• Do not place carbonated
or fizzy drinks in the freezer
compartment. Do not put
bottles or glass containers in
the freezer.
-When the contents freeze,
the glass may break and
cause personal injury and
property damage.
• Do not change the
functionality of or modify the
refrigerator.
-Changes or modifications
may result in personal
injury and/or property
damage. Any changes or
modifications performed
by a 3rd party on this
completed appliance is
neither covered under
Samsung warranty service,
nor is Samsung responsible
for safety issues and
damages that result from
3rd party modifications.
• Do not block air holes.
-If the air holes are blocked,
especially with a plastic bag,
the refrigerator can be over
cooled. If this cooling period
lasts too long, the water filter
may break and cause water
leakage.
-Do not put any newly
introduced food for freezing
near to already food.
• Please observe maximum
storage times and expiry
dates of frozen goods.
• Fill water tank, ice tray,
water cubes only with
potable water.
• Use only the ice maker
provided with the
refrigerator.
• The water supply to this
refrigerator must only be
installed/connected by a
suitably qualified person and
connect to a potable water
supply only.
• In order to operate the
ice maker properly, water
pressure of 138 ~ 862
kPa(1.4~8.8kgf/cm3) is
required.
• Do not apply strong shock
or excessive force onto the
surface of glass.
- Broken glass may result
in a personal injury and/or
property damage.
DA99-02318T-00.indb 9DA99-02318T-00.indb 9 14. 6. 10.  8:2514. 6. 10.  8:25

10_ safety information
CAUTION SIGNS
FOR CLEANING AND
MAINTENANCE
• Do not directly spray
water inside or outside
the refrigerator.
- There is a risk of fire or
electric shock.
• Do not spray inflammable
gas near the refrigerator.
- There is a risk of explosion
or fire.
• Do not spray cleaning products
directly on the display.
- Printed letters on the display
may come off.
• Remove any foreign matter
or dust from the power
plug pins. But do not use
a wet or damp cloth when
cleaning the plug, remove
any foreign material or dust
from the power plug pins.
-Otherwise there is a risk of
fire or electric shock.
• Never put fingers or other
objects into the dispenser
hole and ice chute.
-It may cause personal injury
or material damage.
CAUTION • Unplug the refrigerator
before cleaning and
performing
maintenance.
SEVERE WARNING
SIGNS FOR
DISPOSAL
• Ensure that none of the
pipes on the back of
the appliance are
damaged prior to
disposal.
• R600a or R134a is used
as a refrigerant. Check the
compressor label on the rear
of the appliance or the rating
label inside the refrigerator
to see which refrigerant is
used for your refrigerator.
When this product contains
flammable gas (Refrigerant
R600a), contact your local
authority in regard to safe
disposal of this product.
Cyclopentane is used as a
insulation blowing gas. The
gases in insulation material
require special disposal
WARNING
DA99-02318T-00.indb 10DA99-02318T-00.indb 10 14. 6. 10.  8:2514. 6. 10.  8:25

safety information _11
procedure. Please contact
your local authorities in
regard to the environmentally
safe disposal of this product.
Ensure that none of the
pipes on the back of the
appliances are damaged
prior to disposal. The pipes
shall be broke in the open
space.
• If the appliance contains iso-
butane refrigerant (R600a),
a natural gas with high
environmental compatibility
that is, however, also
combustible. When
transporting and installing
the appliance, care should
be taken to ensure that no
parts of the refrigerating
circuit are damaged.
• When disposing of
this product or other
refrigerators, remove the
door/door seals, door latch
so that small children or
animals cannot become
trapped inside. Leave the
shelves in place so that
children may not easily climb
inside. Children should be
supervised to ensure that
they do not play with the old
appliance.
• Please dispose of the
packaging material for this
product in an
environmentally
friendly manner.
ADDITIONAL TIPS
FOR PROPER
USAGE
• In the event of a power
failure, call the local office
of your Electricity Company
and ask how long it is going
to last.
-Most power failures that are
corrected within an hour
or two will not affect your
refrigerator temperatures.
However, you should
minimize the number of door
openings while the power is off.
- Should the power failure last
more than 24 hours, remove
all frozen food.
• If keys are provided with the
refrigerator, the keys should
be kept out of the reach of
children and not in vicinity of
DA99-02318T-00.indb 11DA99-02318T-00.indb 11 14. 6. 10.  8:2514. 6. 10.  8:25

12_ safety information
the appliance.
• The appliance might
not operate consistently
(possibility of temperature
becoming too warm in
refrigerator) when sited
for an extended period of
time below the cold end of
the range of temperature
for which the refrigerating
appliance is designed.
• Do not store food which
spoils easily at low
temperature, such as
bananas, melons.
• Your appliance is frost free,
which means there is no
need to manually defrost
your appliance, as this will
be carried out automatically.
• Temperature rising during
the defrost can comply with
ISO requirement. But if you
want to prevent an undue
rise in the temperature of the
frozen food while defrosting
the appliance, please wrap
the frozen food in several
layers of newspaper.
• Any increase in temperature
of frozen food during
defrosting can shorten its
storage life.
Saving Energy Tips
-Install the appliance in
a cool, dry room with
adequate ventilation.
Ensure that it is not exposed
to direct sunlight and never
put it near a direct source of
heat (radiator, for example).
- Never block any vents or
grilles on the appliance.
- Allow warm food to cool
down before placing it in the
appliance.
- Put frozen food in the
refrigerator to thaw.
You can then use the low
temperatures of the frozen
products to cool food in the
refrigerator.
-Do not keep the door of
the appliance open for too
long when putting food in or
taking food out.
The shorter time for which
the door is open, the less ice
will form in the freezer.
- Clean the rear of the
refrigerator regularly.
DA99-02318T-00.indb 12DA99-02318T-00.indb 12 14. 6. 10.  8:2514. 6. 10.  8:25

safety information _13
contents
SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR ·····································14
OPERATING THE SAMSUNG SIDE-BY-SIDE REFRIGERATOR······················23
TROUBLESHOOTING·······················································································29
Dust increases energy
consumption.
- Do not set temperature
colder than necessary.
- Ensure sufficient air exhaust
at the refrigerator base
and at the back wall of the
refrigerator.
Do not cover air vent
openings.
- Allow clearance to the right,
left, back and top when
installing.
This will help reduce power
consumption and keep your
energy bills lower.
- For the most efficient use
of energy, please keep the
all inner fittings such as
baskets, drawers, shelves
on the position supplied by
manufacturer.
This appliance is intended
to be used in household and
similar applications such as
- staff kitchen areas in shops,
offices and other working
environments;
- farm houses and by
clients in hotels, motels
and other residential type
environments;
- bed and breakfast type
environments;
- catering and similar non-
retail applications.
DA99-02318T-00.indb 13DA99-02318T-00.indb 13 14. 6. 10.  8:2514. 6. 10.  8:25

14_ setting up
CAUTION
setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy the
many state-of-the-art features and efficiencies that
this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) flooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Overall space required in use. Refer to drawing and
dimension as below.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
When moving your refrigerator
To prevent floor damage be sure the front levelling
legs are in the up position (above the floor). Refer to
‘Levelling the refrigerator’ in the manual (at page 18).
To protect the finish of the flooring, place the
protection sheet such as packing carton under the
refrigerator.
When installing, servicing or cleaning
behind the refrigerator, be sure to pull the
unit straight out and push back in straight
after finishing.
at least 50mm
at least 50mm
Leg Screw Driver
25mm
25mm
50
DA99-02318T-00.indb 14DA99-02318T-00.indb 14 14. 6. 10.  8:2514. 6. 10.  8:25

setting up _15
01 SETTING UP
REMOVING THE REFRIGERATOR
DOORS
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the doors.
1. Removing the Front Leg Cover
First, open both the freezer and refrigerator doors,
and then take off the front leg cover by removing the
three screws counter-clockwise.
Separating the Water Supply Line from
the Refrigerator
1. Remove the water line by pressing the coupler 1
and pulling the water line 2away.
Do not cut the water line. Gently separate it from
the coupler.
2. Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the
hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire
harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
1. With the Freezer door closed, remove the upper
hinge cover 1using a screwdriver, and then
disconnect the wires by gently pulling them apart
2.
2. Remove hinge screws 3and the ground screw
4by turning counter-clockwise, and take off the
upper hinge 5. Be careful that the door does not
fall on you as you are removing it
3. Next, remove the door from the lower hinge 6by
carefully lifting the door straight up 7.
Be careful not to pinch the water tubing and
wire harness on the door.
4. Remove the lower hinge 8using a hex wrench.
2
1
3
4
5
7
6
1
2
DA99-02318T-00.indb 15DA99-02318T-00.indb 15 14. 6. 10.  8:2514. 6. 10.  8:25

16_ setting up
Removing the Fridge Door
1. With the door closed, remove the upper hinge
cover 1using a screwdriver.
2. Remove hinge screws 2and the ground screw
3by turning counter-clockwise, and take off the
upper hinge 4. Be careful that the door does not
fall on you as you are removing it
3. Remove the door from the lower hinge 5by
lifting the door straight up 6.
4. Remove the lower hinge 7from the bracket 8
by gently lifting the lower hinge upwards.
REATTACHING THE
REFRIGERATOR DOORS
Once you have safely placed your refrigerator where
you plan for it to stay, it is time to put the doors back
on.
Reattaching the Freezer Door
1. Replace the freezer door by inserting the water
line 1back into the lower corner of the door and
then into the hole on the lower hinge 2.
Gently pull the water line back down so that it runs
straight, with no kinks or bends.
2. Insert the upper hinge shaft 3into the hole on
the corner of the freezer door 4.
Make sure the hinge is level between the upper
hinge hole 5and the hole of the cabinet 6and
reattach the hinge screws 7and ground screw
8by turning in a clockwise direction.
Reconnect the wires.
3. Place the front part of the upper hinge cover 9
on the front of the upper hinge
10
and reattach
with the screw.
4
2
3
1
4
5
6
7
8
3
1
2
10
9
DA99-02318T-00.indb 16DA99-02318T-00.indb 16 14. 6. 10.  8:2514. 6. 10.  8:25

setting up _17
01 SETTING UP
Reattaching the Fridge Door
1. Insert the lower hinge 1back into the lower
hinge bracket 2.
2. Fit the hole in the corner of the fridge door 3
over the lower hinge 4.
3. Insert the upper hinge shaft 5into the hole
on the hinge 6. Make sure the hinge is level
between the upper hinge hole 7and the hole on
the top of the cabinet 8. Then, reattach hinge
screws 9and the ground screw
10
by turning it
in a clock wise direction.
4. Place the front part of the upper hinge cover
11
on the front of the upper hinge
12
and reattach it
with the screw.
Reattaching the Water Supply Line
1. Insert the water line 2into the coupler 1.
2. The Water Line must be fully Inserted to the center
of transparent coupler to prevent water leakage
from the dispenser.
3. Insert the clip in the install pack and check that it
holds the line firmly.
Reattaching the Front Leg Cover
Before attaching the cover, check water
connector for leakage.
Replace the front leg cover by turning the three
screws clockwise, as shown in the figure.
1
2
1
2
3
4
12
11
Center of transparent
Center of transparent
coupler
coupler
clip A (1/4”)
clip A (1/4”)
(6.35mm)
(6.35mm)
DA99-02318T-00.indb 17DA99-02318T-00.indb 17 14. 6. 10.  8:2514. 6. 10.  8:25

18_ setting up
LEVELLING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make final adjustments. If the refrigerator
is not level, it will not be possible to get the doors
perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than
the fridge
Insert a flat-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
When the Freezer door is higher than
the fridge
Insert a flat-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the fridge.
Refer to the next section for the best way to
make very minor adjustments to the doors.
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for getting
the doors perfectly even. If you need help, review the
previous section on levelling the refrigerator.
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the
nut 1from the
lower hinge until
it reaches the
upper end of the
bolt 2.
When you release the nut 1, make sure that
you use the Allen wrench provided 3to loosen
the bolt 2in a counter-clockwise direction.
You should then be able to unscrew the nut 1
with your fingers.
2. Adjust the
height difference
between the
doors by turning
the bolt 2
clockwise
or counter clockwise .
When you turn clockwise , the door will
move up.
3. After adjusting
the doors, turn
the nut 1
clockwise
until it reaches
the lower end
of the bolt, then tighten the bolt again with the
wrench 3to fix the nut in place 1.
If you do not secure the nut firmly, the bolt may
release.
Leg
Screw Driver
Screw Driver
Leg
Adjustment
part
When the door of the freezer
is higher than the fridge
3
2
1
Wrench
Bolt
Nut
3
2
Wrench
Bolt
3
2
1
Wrench
Bolt
Nut
DA99-02318T-00.indb 18DA99-02318T-00.indb 18 14. 6. 10.  8:2514. 6. 10.  8:25

setting up _19
01 SETTING UP
CHECKING THE WATER
DISPENSER LINE (OPTIONAL)
A water dispenser is just one of the helpful features
on your new Samsung refrigerator. To help promote
better health, the Samsung water filter removes
unwanted particles from your water. However, it
does not sterilize or destroy microorganisms. You
will need to purchase a water purifying system to do
that. In order for the icemaker to operate properly,
water pressure of 138 ~862 kPa is required. Under
normal conditions, a 170 cc paper cup can be filled
in 10 seconds. If the refrigerator is installed in an area
with low water pressure (below 138 kPa), you can
install a booster pump to compensate for the low
pressure. Make sure the water storage tank inside
the refrigerator is properly filled. To do this, press the
water dispenser lever until the water runs from the
water outlet.
Water Line installation Kits are included. You can
find it in one of the freezer drawers.
INSTALLING THE WATER
DISPENSER LINE
For Interior model
Parts for water line Installation
Connecting to the water supply line
1. first, shut off the main water supply line.
2. locate the nearest cold, drinking water line.
3. follow the Water line Installation Instructions in the
installation kit.
4. After connecting the water supply to the water
filter, turn your main water supply back on and
dispense about 1l to clear and prime the water
filter.
Connecting the water line to the
refrigerator
1. Remove the dust cap from the water line on the
rear of the unit and fit a compression nut from the
install kit.
2. Remove the water pipe from the install kit and fit a
compression nut to one end.
3. Join the two pipes together using the compression
joint from the install kit ensuring that the joint is
water tight.
4. Join the other end of the install pipe to the main
water supply and turn on the water to check for
leaks.
Only connect the water line to a drinkable water
source.
If you have to repair or disassemble the water
line, cut off 6.5mm of the plastic tubing to
make sure you get a snug, leak-free connection.
Before being used, the leakage in these
places should be examined
CAUTION
The water line must be connected
to the cold water pipe. If it is connected
to the hot water pipe, it may cause the
purifier to malfunction.
1 Water line fixer and screws
2
Pipe connector
3
Water line
4
Water Filter
Close Main
Close Main
Water pipe
Water pipe
Close Main
Close Main
Water pipe
Water pipe
NO GAP
NO GAP
Remove
Remove
cap
cap
Water Line
Water Line
from unit
from unit
Water Line
Water Line
from Kit
from Kit
No gap
No gap
Loosen a
Loosen a
CAUTION
DA99-02318T-00.indb 19DA99-02318T-00.indb 19 14. 6. 10.  8:2514. 6. 10.  8:25

20_ setting up
• Samsung Warranty does not cover WATER LINE
INSTALLATION.
• The cost of connection to a water supply is at the
customer expense, unless included in the delivery
charge (refer to the delivery agreement with the
seller)
• Please contact Plumber or Authorised Installer for
the installation if needed.
• If Water leakage occurs due to improper
installation, Please contact installer.
INSTALLING THE WATER
DISPENSER LINE
For Exterior model
Parts for water line Installation
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.
select the location where the purifier is to
install. (Model with the purifier)
- If you wish to reassemble the water inlet and outlet
sides of the purifier during purifier installation, see
the reference illustration.
- Cut the water line attached to the purifier to the
appropriate place after measuring the distance
between the purifier and the cold water tap.
Water line fixer and screws
Pipe connector
Water line Purifier lock-clip Purifier
CAUTION
The water line must be connected to the cold
water pipe. If it is connected to the hot water
pipe, it may cause the purifier to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.
Note:
If the coupler does not fit on the current tap, go
the nearest authorised service dealer and purchase the
right couplers fittings.
DA99-02318T-00.indb 20DA99-02318T-00.indb 20 14. 6. 10.  8:2514. 6. 10.  8:25