Samsung RH25H561 Series User manual

SIDE BY SIDE
BASIC : RH25H561*
,LS3165H52HR,RS1165H52HR:EMANLEDOM
,ZB/LS3165H52HR,PA/LS3165H52HR,AA/RS1165H52HR:EDOCLEDOM
RH25H5613SL/EY, RH25H5613SL/EM, RH25H5613SL/CL,
RH25H5613SL/PE, RH25H5613SL/BG, RH25H5613SL/ZS
REFRIGERATOR
REFRIGERATOR CONTENTS
1. PRECAUTIONS(SAFETY WARNINGS) ··············· 5
2. PRODUCT SPECIFICATIONS ······································ 8
3. DISASSEMBLY AND REASSEMBLY ················ 19
4. TROUBLESHOOTING ··················································· 41
5. WIRING DIAGRAM ··························································· 69
6. PCB DIAGRAM ····································································· 70
7. SCHEMATIC DIAGRAM ················································· 74
8. MODEL CODE TABLE ····················································· 76
9. REFERENCE INFORMATION ··································· 77
10. EXPLODED VIEW & PART LIST ··························· 79
RH25H5611BC/AA, RH25H5611WW/AA

272, Oseon-Dong, Gwangsan-Gu,
Gwangju-City, Korea, 506-723
TEL : [phone], 0975
FAX : [phone]
© Samsung Electronics Co., Ltd.
Refrigerator Division 2014
Printed in Korea
- This Service Manual is a property of Samsung Electronics Co., Ltd.
Any unauthorized use of Manual can be punished under applicable
International or domestic law.
For the latest information, Please access to our service web site
• Europe, Mid east, Africa : http://gspn1.samsungcsportal.com
• Asia : http://gspn2.samsungcsportal.com
• North America : http://gspn3.samsungcsportal.com

5
CAUTION/WARNING SYMBOLS DISPLAYED
SYMBOLS
Indicates that a
danger of death
or serious injury
exists.
Indicates that a risk
of personal injury
or material damage
exists.
means “Prohibited”.
means “Do not disassemble”.
means “No contact”.
means ”The things to be followed”.
means “Ground to prevent Electric shock”.
means “Power cord should be unplugged
from the consent”
Warning
Caution
1. PRECAUTIONS (SAFETY WARNINGS)

6
PRECAUTIONS (SAFETY WARNINGS)
Pull the power plug out before
attempting to exchange the
interior lamp of the refrigerator.
●
This will prevent danger of electric
shock.
Warning & Caution
Unplug
Use only rated components for
replacement.
●
Check the correct model, rated
voltage, rated current, operating
temperature.
Before repair, make sure that the
wires such as harness are bundled
tightly.
●
Bundle wires tightly so that they
are not detached easily and get wet.
Check if there is any trace indicating
the permeation of water.
●
If there is that kind of trace, change
the related components or do the
necessary treatment such as taping
using the insulating tape.
After repair, check the
assembled state of components.
●
It must be in the same assembled
state as before disassembly.
When repairing, completely remove
dust and foreign substances from
housing, wiring, joint etc..
●
It may prevents fire due to tracking
or short.
Rated
components
When installing, servicing, or
cleaning behind the refrigerator, be
sure to pull the unit straight out and
push back in straight after finishing.
Also, make sure your floor supports
the full-load refrigerator. Otherwise, it
may cause floor damage.
CAUTION

7
PRECAUTIONS (SAFETY WARNINGS)
●
Please let users know following warnings & cautions in detail.
Do not allow users to put bottles or
kinds of glass in the freezer.
●
F reezing of the contents may inflict a
wound.
Do not allow users to store narrow
and lengthy bottles or foods in a
small multi-purpose room.
●
It may hurt you when refrigerator door
is opened and closed resulting in falling
stuff down.
Do not allow users to store
pharmaceutical products, scientific
materials, etc., in the refrigerator.
●
The products which temperature control
should not be stored in the refrigerator.
Do not allow users to store articles
on the product.
●
Opening or closing the door may cause
things to fall down, with may inflict a
wound.
Prohibited Prohibited Prohibited
Prohibited
Warning & Caution
Do not allow users to
disassemble, repair or alter.
●
It may cause fire or abnormal
operation which leads to injury.
Do not
disassemble
Do not allow users to insert the
power plugs for many products at
the same time.
●
May cause abnormal generation of
heat or fire.
Prohibited
Do not allow users to bend the
power cord with excessive force
or do not have the power cord
pressed by heavy article.
●
May cause fire.
Do not allow users to install the
refrigerator in the wet place or
the place where water splashes.
●
Deterioration of insulation of electric
parts may cause electric shock or fire.
Make sure of the earth.
●
If earthing is not done, it will
cause breakdown and electric
shock.
Earth

8
2-1) INTRODUCTION OF MAIN FUNCTION....................................................................................... 9
2-2) MODEL SPECIFICATIONS........................................................................................................ 10
2-3) SPECIFICATIONS ..................................................................................................................... 11
2-4) INTERIOR VIEWS ..................................................................................................................... 12
2-5) MODEL SPECIFICATION &COMPARISON CHART.................................................................. 13
2-6) DIMENSIONS OF REFRIGERATOR (INCHES) .......................................................................... 16
2-7) OPTIONAL MATERIAL SPECIFICATION................................................................................... 17
2-8) REFRIGERANT ROUTE IN REFRIGERATION CYCLE .............................................................. 18
2. PRODUCT SPECIFICATIONS

9
PRODUCT SPECIFICATIONS
2-1) Introduction of main function
• Major feature
Changed Part Description Picture
CABI Auger Motor
Auger Motor
(Auger Mortor Located in
CABI)
DOOR DISPENSER New Design Dispener

10
PRODUCT SPECIFICATIONS
2-2) Model Specifications
NOTE
Key features of your new refrigerator
Your Samsung Side-By-Side Refrigerator comes equipped with
many space-saving, innovative storage and energy-efficient
features.
• Twin Cooling PlusTM
Twin CoolingTM‚ system uses two evaporators to independently
control temperature of the refrigerator and freezer compartments
maintaining proper humidity levels and preventing odor transfers
between compartments.
• Multi Airflow
Provides even cooling throughout the refrigerator to maintain
optimal temperatures to keep food fresh.
• LED Tower Lighting
See everything in a new light with LED tower lighting.
• Clear View Icemaker
The Icemaker is located in the freezer door, this ensures that all the
shelf space can be fully utilized. Ice cubes are quickly produced and
the clear ice bucket lets you easily see the amount of ice cubes
produced.
• Premium Design Ice & Water Dispenser
Quick and easy access to filtered water and cubed/crushed ice at
your fingertips with the external dispenser.
This operation instruction covers various models. The characteristics of your appliance may
differ slightly from those described in this manual.

Defrost Control From 12 to 48 hrs
Defrost Thermistor(502AT) 10
℃ (off)
Electrical Rating H(115V/60Hz) 11.6 Amps
Maximum Current Leakage 0.25 mA
Maximum Ground Path Resistance 0.1 Ohm
Energy Consumption
RS25H 634 kWh/y
RH25H (647) kWh/y
Ambient Temperature ................. 21 ℃ 32 ℃
Refrigerator,ºC .............................. 1~7 1~7
Freezer,ºC ............................. -23~-15 -23~-15
Run Time,% ........................
≺60(21 ℃ ) ≺80(32 ℃ )
Refrigerant Charge (R134a) ..................... 7.76 oz
Compressor..................................... 1290 BTU/hr
Compressor oil .................................. Freol α 15
Capillary tube(Dia, Length) ...............
0.033＂,130＂
Dryer................................... Molecular Sieve XH-9
Clearance must be provided for air circulation
AT TOP ........................................................ 2"
AT SIDES ..................................................... 2"
AT REAR ...................................................... 2"
RS25H51**
ASSY PCB MAIN ......................... DA92-00624*
ASSY PCB SUB INVERTER ........ DA92-00215*
Thermistor(Freezer) .................... DA32-10109W
Thermistor(Freezer Evaporator)...DA32-00029Q
Thermistor(Refrigerator)- ............. DA32-10105U
SENSOR TEMP .................................. DA32-00029R
Thermistor(Ambient) .................... DA32-10109B
Thermistor(Ice-Maker) ................. DA32-00060A
SENSOR HUMIDITY ................... DA32-00034B
Overload Relay ............................ DA34-00004D
Fan-Motor(FRE)........................... DA31-00146E
Fan-Motor(REF)............................DA31-00146J
FAN.............................................. DA31-00320A
Heat exchanger
Heat exchanger
Fan
Fan
Fan
Fan
11
PRODUCT SPECIFICATIONS
2-3) Specifications
Compressor
Dryer C-Fan
condenser water valve
ELECTRICAL SPECIFICATIONS Freezer Refrigerator
NO LOAD PERFORMANCE
REFRIGERATION SYSTEM
INSTALLATION
MODELS
REPLACEMENT PARTS

2-4) Interior Views
Ice Maker Bucket
Drawers
Drawers
Shelves
Shelves
Shelves
Lamp Cover
Lamp Cover
Door Bins
Door Bins
Door Bins
Door Bins
Fruit &
Fruit &
Vegetable
Vegetable
Drawer
Drawer
Water Filter
Water Filter
Auger motor
12
PRODUCT SPECIFICATIONS

13
PRODUCT SPECIFICATIONS
2-5) Model Specification &Comparison Chart
ITEM Specification
MODEL RH25H5611* RH25H 5613*
D-power G-power
Net Capacity
TOTAL 9.1 cu.ft 9.8 cu.ft
Refrigerator 15.6 cu.ft 15.6 cu.ft
Freezer 24.7 cu.ft 25.4 cu.ft
Net Dimension(W x D x H) 36 1/20" x 33 3/4" x 69 15/16"
Rated Input Voltage and
Frequenc AC 115~127V/60Hz AC 220~240V/50Hz, 220V/60Hz
Motor Rated Consumption
Power 140W
Electric Heater Rated
Consumption Power
AC 120V / 513.6W
DC12V / 17W
AC 230V / 513.6W
DC12V / 17W
Type of Refrigerator No Frost cooling Refrigerator
Refrigerant R134a
Refrigerant Input Amount 220 gr (7.76 oz)
Product Weight 300.5 lb

14
PRODUCT SPECIFICATIONS
Items Specification
Models RH25H5611* / RH25H 5613*
Components for Freezer
Compressor
Model MKV190CL2B/SM1
MKV190GL2J/SM1
Starting type BLDC
Oil Charge FREOL
α 15
Evaporator
Freezer SPLIT FIN TYPE
Refrigerator SPLIT FIN TYPE
Condenser Forced and natural convection type
Dryer Molecular sieve XH-9
Capillary tube(Dia×Length) 0.033 ”×130 ”
Refrigerant R134a
Room Temperature Sensor
Components
Freezer
Model Temperature
Selection ON( ˚F/ ˚C ) OFF( ˚F/ ˚C )
THERMISTOR
(F-SENSOR)
502AT
-8 ˚F (-23˚C) -5˚F (-21˚C) -11˚F (-24 ˚C)
0 ˚F (-18˚C) 3˚F (-16˚C) -3˚F (-19 ˚C)
5 ˚F (-15˚C) 8˚F (-13˚C) 3˚F (-16 ˚C)
Refrigerator
Model Temperature
Selection ON( ˚F/ ˚C ) OFF( ˚F/ ˚C)
THERMISTOR
(R-SENSOR)
502AT
34 ˚F (1˚C) 38˚F (3˚C) 30˚F (-1 ˚C)
37 ˚F (3˚C) 41˚F (5˚C) 33˚F (1 ˚C)
44 ˚F (7˚C) 48˚F (9˚C) 40˚F (5 ˚C)
Defrost Related Components
Defrost Cycle
First Defrost Cycle (Concurrent
defrost of F and R) 6hr ± 10min (Comp on integation)
Defrost Cycle(FRE) 12~48hrs (vary according to the conditions used)
Pause time 10 ± 2 min
Defrost Sensor
F Defrost-
Sensor
Model THERMISTOR (502AT)
SPEC 5.0
㏀ at 25˚C
R Defrost-
Sensor
Model THERMISTOR (502AT)
SPEC 5.0
㏀ at 25˚C
Bimetal
Rated 250V/60Hz, 10A
Operating temperature Off : 60± 5˚C, On : 40± 5˚C

15
PRODUCT SPECIFICATIONS
Items Specification
Models RH25H5611* / RH25H 5613*
D-Power G-Power
Electronic Components
Defrost Heater (FRE) Conducting at F
Defrosting
AC 120V / 218W AC 230V / 218W
Defrost Heater (REF) Conducting at R
Defrosting
AC 120V / 140W AC 230V / 218W
DISPENSER Heater Conducting at Case
Dispenser
AC 120V 6W AC 230V 6W
HEATER CORD-DOOR
REF (RH25H56* only)
Conducting at Home
Bar
DC12V / 17W DC12V / 17W
Water Pipe Heater Conducting at Water
Pipe
AC 120V / 4.6W AC 230V 4.6W
Ice Maker Heater Conducting at Ice Maker AC 115V / 145W AC 230V 145W
Thermal Fuse for preventing
Overheating of Refrigerator Defrost-Heater
AC 250V / 10A 110 ˚C (230 ˚F)
Over load Relay
Model
4TM445PHBYY-82
Temp. ON 125 ± 5 ˚C (257 ± 9 ˚F)
Temp. OFF 69 ± 9 ˚C (156 ± 16 ˚F)
Rated Voltage AC 115~127V/60Hz AC 220~240V/50Hz,
220V/60Hz
MOTOR-BLDC(FRE)
DREP5020LB, DC12V,
CCW, 2520rpm±4%,
3.2W±20%
DREP5020LB, DC12V,
CCW, 2520rpm±4%,
3.2W±20%
MOTOR-BLDC(REF)
DREP5020LD, DC12V,
CCW, 1920rpm±4%,
2.8W±20%
DREP5020LD, DC12V,
CCW, 1920rpm±4%,
2.8W±20%
MOTOR-BLDC (Circuit)
DC 12V, CCW,
1250rpm±5%, 1.7W±20%
DC 12V, CCW,
1250rpm±5%, 1.7W±20%
MOTOR-BLDC (Box Fan)
G6015S12B, DC12V, 0.07A,
1.0W, 2400rpm±7%, CW
G6015S12B, DC12V, 0.07A,
1.0W, 2400rpm±7%, CW
Geared Motor I/M Indoor
MVCC18AR19,
AC120V/60Hz, 18.18rpm,
3.5W, 0.04A, CW
MVCC18AR19,
AC120V/60Hz, 18.18rpm,
3.5W, 0.04A, CW
Geared Motor DISP
MVCD18AR19,
AC120V/60Hz, 18.18rpm,
3.5W, 0.04A, CCW
MVCD18AR19,
AC120V/60Hz, 18.18rpm,
3.5W, 0.04A, CCW
MOTOR GEARED AC AUGER
ISG-3235SSA, 120V/60Hz,
CW, 1.2A±15%,
58W±15%,12rpm±10%
ISG-3235SSB, 230V/50Hz,
CW, 0.95A±15%,
75W±15%, 10rpm±10%
MOTOR DC ICEMAEKR
GSP-24RW-011F, DC12V,
CW/CCW
GSP-24RW-011F, DC12V,
CW/CCW
Lamp (FRE) DC12V / 8EA / 210mA (RH25H56* only)
Lamp (REF) UPPER
DC12V / 6EA / 140mA (RH25H56* only)
LOWER DC12V / 3EA / 75mA *2EA (RH25H56* only)
Door Switch (Reed Switch) 200 VDC / 0.5A
Power cord AC 125V 10~15A AC 250V 10~16A
Earth Screw BSBN (BRASS SCREW)

16
PRODUCT SPECIFICATIONS
908 (35 3/4)
1169 (46)
442 (17 2/5)
549 (21 3/5)
1295.5 (51)
512.5 (20 1/5)
747 (29 2/5)
919 (36 1/5)
857 (33 3/4)
98 (3 17/20)
386.5 (15 1/5)
33.5 (1 3/10)
89 (3 1/2)
1776 (69 9/10)
2-6) Dimensions of Refrigerator (Inches)

17
PRODUCT SPECIFICATIONS
Photograph Part Name Part Code
ASSY PACKING-SUB
CLIP-FITTING LOCK
BAG PE
WRENCH-SPANNER
DA99-03490N
DA61-04522A
DA69-90113K
DA80-00002C
(Optional)
ASSY-INSTALL FILTER
SCREW-TAPPING
POPE-CONNECT WATER PACKING
CLAMP
LABER-PE-BAG
BAG-ENVEL OPE
WRENCH-SPANNER
ASSY PIPE-WATER
DA97-01469W
6002-000213
DA62-01329A
DA65-20110B
DA68-00007C
DA68-01475B
DA69-00484K
DA80-00002C
DA97-00753D
ASSY PACKING INSTALL
FIXER-HANDLE
BAG-PE
WRENCH-SPANNER
ASSY LABEL-HANDLE
INSTRUCTION
DA99-03680B
DA61-03734A
DA69-90113S
DA80-00026B
DA99-03429H
ASSY INSTALL-ACCESSORY
BAG PE
SPANNER
SHIM HINGE-MID
DA99-03490T
DA69-90113S
DA80-00028A
DA63-07957A
2-7) Optional Material Specification

18
PRODUCT SPECIFICATIONS
Compressor →Condenser →Pipe Hot →Pipe Cluster Rear →Dryer →Capillary Tube →
Evaporator →Suction Pipe →Compressor
2-8) Refrigerant Route in Refrigeration cycle
Pipe Cluster
Rear
Suction Pipe
Assy Evap Fre
Condenser
Compressor
Capillary Tube
Assy Evap Ref
Pipe Hot
Dryer

19
3-1) CAUTION ON DISASSEMBLY ····································································································20
3-2) FREEZER DOOR························································································································· 21
3-3) REFRIGERATOR OUT DOOR & IN DOOR ·················································································· 23
3-4) CONTROL PANEL······················································································································· 25
3-5) DOOR GASKET··························································································································· 26
3-6) DOOR HANDLE ··························································································································26
3-7) TEMPERED GLASS SHELF ········································································································ 27
3-8) PLASTIC DRAWERS IN REFRIGERATOR ·················································································· 28
3-9) GALLON DOOR BIN ··················································································································· 28
3-10) WATER FILTER ························································································································· 28
3-11) WATER FILTER TANK OF REFRIGERATOR············································································· 29
3-12) DAMPER OF REFRIGERATOR ·································································································31
3-13) DOOR BIN OF FREEZER ·········································································································· 31
3-14) ICE MAKER COMPARTMENT ··································································································32
3-15) PLASTIC DRAWER IN FREEZER ······························································································ 33
3-16) FREEZER SHELF ······················································································································ 33
3-17) COVER MULTI IN FREEZER ····································································································· 33
3-18) EVAPOARTOR COVER IN FREEZER························································································ 34
3-19) EVAPORATOR IN FREEZER ·····································································································34
3-20) AMBIENT THERMISTOR···········································································································35
3-21) DOOR S/W & HUMIDITY SENSOR·························································································· 35
3-22) COMP COOLING FAN ·············································································································· 36
3-23) COMP COOLING FAN MOTOR ································································································ 37
3-24) ASSY PBA································································································································· 39
3-25) ASSY CASE AUGER MOTOR ··································································································· 40
3. DISASSEMBLY AND REASSEMBLY

20
DISASSEMBLY AND REASSEMBLY
3-1) Caution On Disassembly
●
When replacing or repairing electric components, unplug power cord before you replace or repair.
→ Be careful of electric shock
●
When replacing electric components, use a regular component.
→ Be sure to check the indications like the model number, rating voltage, rating current, operation
temperature etc..
●
When repairing, the wiring of harness should be free from water infiltration and firm.
→ When applying force, the harness shouldn’t be detached.
●
When repairing, completely remove dust and foreign substances from housing, wiring, joint etc..
→ Prevents fire due to tracking or short.
●
Check if water came into electric components.
→ If there is a sign of water infiltration, replace the component and take necessary action like
insulation tapping etc..
●
Check the assembly of the component after repairing.
→ Maintain the same status as that before repairing.
●
Check the using environment of the refrigerator.
→ If the installation is made unstably or the machine is installed in humid conditions or water,
change its location.
●
If grounding seems necessary, ground it.
→ If there is risk of short-circuit due to water or humid conditions, be sure to earth.
●
Do not plug several devices in one socket.
●
Check for breakage, press, scratch, deterioration etc. of power plug and power consent.
→ Immediately repair if the power plug or power consent is defective.
→ When moving the product, be careful not to get scratch or pressed due to surrounding objects.
●
Do not store food unstably or do not store bottles in the freezer.
●
Do not let consumer repair the machine personally.
●
Do not store other materials except food in the refrigerator.
→ Medicine, chemical sample and etc. : Home refrigerator cannot maintain precise temperature.
→ Highly flammable material (alcohol, benzene, ether, LP gas, butane gas etc.) : explosive.
- TOOLS REQUIRED FOR DISASSEMBLY
IMAGE ITEM
(+) SCREW DRIVER
(-) SCREW DRIVER
(-) SMALL SCREW DRIVER
SOCKET WRENCH

21
DISASSEMBLY AND REASSEMBLY
3-2) Freezer Door
Part name How To Do Descriptive Picture
Door Freezer
Removing the Front leg
cover.
1.Open the freezer and refrigerator
doors.
2.Take off the front leg cover by
turning the three screw counter-
clockwise.
Removing the Water supply
line.
1.Separate the Water Supply Line
from the Refrigerator by pressing the
coupler (2)
2.pulling the water tube (1) away.
CAUTION
If a red clip is on the
coupler, it must be
removed before
removing the tube.
①②
After raising the out door, insert the supplied SHIM HINGE
MIDDLE in the gap between Show case of fridge and the
HINGE-SHAFT.
SHIM HINGE MIDDLE are enclosed with the refrigerator.
The thickness of RING is 1mm.
CAUTION
Keep the Rings out of the reach of children and make sure that children do not play with them or put
them into their mouths.
CAUTION
Don’t make Show case door higer than inner case door.
– Show case door can break away from STOPPER (HINGE)
- MAKING MINOR ADJUSTMENTS BETWEEN SHOW CASE AND INNER CASE OF FRIDGE

22
DISASSEMBLY AND REASSEMBLY
Part name How To Do Descriptive Picture
Door Freezer
Removing the Upper hinge.
1. With the door closed,remove the
upper hinge cover (1) using a
screwdriver.
2. Disconnect the wires (2).
3. Remove hinge screws (3) and
ground screw (4) counter-clockwise
and take off the upper hinge (5)
along the arrow.
CAUTION
When diassembling,
make sure the unit is
turned off
①
②
②
③
④
Removing the Lower hinge.
1. Remove the door from the lower
hinge (1) by carefully lifting the
door.
2. Remove the lower hinge from the
bracket hinge (2) by lifting the lower
hinge in the direction of the arrow.
①
②