Samsung RF267 User manual

Refrigerator
user manual
imagine the possibilities
Thank you for purchasing your Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
RF267
DA68-01812G.indb 1 2009.8.10 9:7:33 AM
English Français

Features of your new Refrigerator
KEY FEATURES OF YOUR NEW REFRIGERATOR
Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-efficient
features.
Twin Cooling System
The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system,
the Freezer and Refrigerator cool more efficiently.
Additionally, this separate air flow system prevents food odor of one compartment from seeping into
other compartments.
Cool Select Pantry TM
The Cool Select pantry TM is a full-width drawer with adjustable temperature control.
Bigger & Wider Space
The wide shelf area and pantry provide enough space for larger items like a pizza box, etc.
The wide freezer drawer also provides enough space for 2~3 turkeys.
Secure Auto Close
The Secure Auto Close feature will automatically close a door that is slightly open.
Compact Ice Maker
The Ice maker can dispense cubed or crushed ice.
Digital Display and Temperature Control
A helpful beeper alerts you if door is ajar.
Tilting Pocket
The Tilting pocket can be used to store up to a 16” pizza.
Auto Pull Out Drawer
The upper drawer in the freezer comes out automatically as you just open the freezer door.
Easy Handle
Freezer door can be opened with less eort.
Energy Star
Energy star labeled this product could save your energy costs.
For easy future reference, write the model and
serial number down which can be found on the left
side of the refrigerator.
Model #
Serial #
2_ Features

Safety Information
SAFETY INFORMATION
Before using your new Samsung French Door Refrigerator, please read this manual thoroughly to
ensure that you know how to safely and efficiently operate the features and functions that your
new appliance oers.
Because the following instruction covers various models, the characteristics of your Refrigerator
may dier slightly from the Refrigerator described in this manual. If you have any question, contact
us at 1-800-SAMSUNG or find help and information online at www.samsung.com.
What the icons and signs in this user manual mean :
WARNING
Hazards or unsafe practices that may result in .
CAUTION
Hazards or unsafe practices that may result in
.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when using your
refrigerator, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
SEVERE WARNING SIGNS
Do not plug several appliances into the same power receptacle.
Large appliances draw a lot of power. Powering more than one appliance or machine from a single power source
could cause overheating and cause a fire.
Make sure that the power plug is not kinked or damaged by the back of the Refrigerator.
Do not spray water directly into or on the outside of the Refrigerator/Freezer drawer.
Do not use aerosols near the Refrigerator.
Safety Information _3

Do not put undue stress on the power cord or place heavy articles on it.
Placing heavy articles on the power cord create the risk of explosion or fire.
Do not insert the power plug with wet hands.
It may cause electric shock.
Do not put a container filled with water on the Refrigerator.
If it spills, it may cause fire or electric shock.
Do not install the Refrigerator in a damp place or water closed places.
Wet and/or deteriorated insulation of the internal electrical parts may cause electric shock or fire.
Do not store volatile or flammable substances in the Refrigerator.
Storing benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.
Do not disassemble or repair the Refrigerator by yourself.
You run the risk of fire, appliance malfunctions and/or personal injury. Call your nearest service center for
help from a qualified service technician.
Unplug the Refrigerator before changing the interior light.
Changing the light while the Refrigerator is plugged in may cause electric shock.
If you wish to dispose of the Refrigerator, remove the doors and seals before throwing
it away.
.rotaregirfeRehtotnibmilcyehtfidlihcapartnenac)slaesriehtdna(sroodehT
Make sure that the doors are o, and ensure that no one is suocated by being locked inside.
The Refrigerator must be safely grounded
Always make sure that you have grounded the Refrigerator before attempting to investigate or repair any
part of the appliance. Power leakages can cause severe electric shock.
Never use gas pipes, telephone lines or other potential lightning attractors as an
electrical ground.
Improper use of the grounding plug can result in a risk of electric shock. If it is necessary to use an
extension cord to power the Refrigerator, use only a 3-wire extension cord that has a 3-blade ground
plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extention
cord should be AC 115V~120V, 10A, or more. Additionally, if a grounding adapter is used, make sure the
receptacle box is also fully grounded.
Safety Information
4_ Safety Information

CAUTION SIGNS
Use good judgment when filling the Refrigerator with food and drinks.
ŘIn an overfull Refrigerator, heavy, fragile, bulky or breakable items may fall out and cause personal injury
and/or damage to surrounding objects.
Do not put bottles or glass containers in the Freezer drawer.
ŘWhen the contents freeze and then expand, the glass may break and cause personal injury or leave
dangerous glass shards in the Freezer.
If the electrical wall socket is loose, do not insert the power plug.
ŘThere is a risk of electric shock or fire. Have the plug looked at by a licensed electrician.
Never unplug your Refrigerator by pulling on the power cord.
ŘAlways grip the power cord firmly and pull straight out from the outlet. Yanking or pulling on the power
cord may cause a short-circuit, fire and/or electric shock.
ŘA damaged power cord must be replaced by the manufacturer, a certified service agent or qualified service
personnel.
Do not store articles on the top of the appliance.
ŘWhen you open or close the door, the articles may fall and cause personal injury and /or damage to
surrounding objects.
Do not store pharmaceutical products, scientific materials and temperature-sensitive
products in the refrigerator.
ŘProducts that require exact temperature controls should not be stored in the Refrigerator.
Do not allow children to climb, stand or hang on shelves and handles of the
Refrigerator. They could damage the Refrigerator and seriously injure themselves.
Do not sit on the freezer door. The door may break.
Do not allow children to climb into the freezer basket.
If you notice a chemical or burning plastic smell or see smoke, unplug the Refrigerator
immediately and contact your Samsung Electronics Service Center.
After your Refrigerator is in operation, do not touch the cold surfaces in the Freezer
compartment. Particularly when hands are damp or wet, skin may adhere to these
extremely cold surfaces.
ŘSkin may stick to the surface and you may get frostbite.
Do not put your hands under the appliance.
ŘAny sharp edges may cause personal injury.
Never put fingers or other objects into the water dispenser hole or ice chute.
Safety Information _5
CAUTION
,)  /QVLJ! !"")5

It may cause personal injury and/or material damage.
If the Refrigerator will not be used for a long period of time (for example, over several
months), unplug the power from the wall.
Over time, deterioration in the power cord insulation may cause fire.
Do not use a wet or damp cloth when cleaning the plug.
Remove any dust or foreign matter from the power plug pins.
A Dirty power plug can increase the risk of fire.
If the Refrigerator is disconnected from the power supply, you should wait for at least
five minutes before plugging it back in.
Do not place the equipment directly in sunlight.
The appliance must be positioned for easy access to power source.
If the power cord is damaged, it must be replaced by the manufacturer, a certified
service agent or qualified service personnel.
If you have a long vacation planned, empty the Refrigerator and turn it o.
Wipe excess moisture from the inside and leave the doors open to keep odor and mold from developing.
Service Warranty and Modification
Any changes or modifications performed by a 3rd party on this finished appliance is not covered under
Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party
modifications.
Children can get trapped inside Refrigerators.
Before you throw away your old Refrigerator or Freezer, make sure that you;
Take o the doors.
Leave all shelves in places so that children may not easily climb inside and shut the door while they are
inside.
This appliance is not intended for use by small children or infirm persons without capable, adult
supervision. Small children should be supervised when using the appliance.
Safety Information
6_ Safety Information
CAUTION

Contents _7
Contents
08
22
40
WARRANTY
41
10 Removing the refrigerator doors
12 Disassemble the freezer drawer
13 Reattaching the refrigerator doors
15 Assemble the freezer drawer
16 Adjusting the doors
17 Making minor adjustments between doors
18 Adjusting the freezer drawer level
18 Checking the water dispenser line
20 Installing the water line
40 Troubleshooting
41 Warranty
WIRING DIAGRAM
42
42 Wiring diagram
09 Setting up the Refrigerator
09 How to assemble the handle
08 Getting ready to install the refrigerator
22 Using the control panel
23 Using the digital display
24 Controlling the temperature
25 Using the ice and cold water dispenser
26 Ice production
27 Parts and features
28 Storing food
29 Using the cool select pantry™
29 Using the tilting pocket
30 Removing the refrigerator accessories
31 Using the doors
32 Removing the freezer accessories
33 Cleaning the refrigerator
34 Changing t he interior light led
35 Changing the water filter

Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
location with easy access to the water supply.
location without direct exposure to sunlight.
location with level (or nearly level) flooring.
location with enough space for the Refrigerator doors to open easily.
Allow sufficient space for air circulation of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling
system may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water
line connections. When you install the refrigerator next to a fixed wall, minimum
clearance is 3 ¾” (95mm) between the refrigerator and wall to allow the door to
swing open.
8_ Setting Up
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
Screwdriver
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are
in the up position (above the floor). Refer to ‘Levelling the
refrigerator’ in the manual.
To protect the finish of the flooring, place the protection
sheet such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the refrigerator,
be sure to pull the unit straight out and push back in straight
after finishing.
CAUTION
B
A
CED
B
A
CED
Model Depth
“A”
Width
“B”
Height
“C”
Overall
Height “D”
Depth
“E”
RF267
29- ”
(83.6cm)
35-¾”
(90.8cm)
69”
(175.2cm)
69-¾”
(177.4cm)
35- ”
(90.5cm)

Setting Up _9
SETTING UP THE REFRIGERATOR
Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of
the appliance. By completing the following steps, your Refrigerator should be fully operational.
1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the
Refrigerator. Refer to installation instructions in this manual.
2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled
and the motor will run smoothly.
4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food
and drinks in the Refrigerator after the temperature is sufficiently cool.
01 SETTING UP
Check the accessory list below.
Water filter
(DA29-00002B)
Hex wrench
(DA80-00002C)
Compressin fitting
(DA62-00305A)
Compression nut
(DA74-00070B)
COMPONENTS FOR HANDLE ASSEMBLY
[ 3-DOOR TYPE ]
Wrench : 3/32 inch
Label Handle Instruction
Fridge
Freezer
HOW TO ASSEMBLE THE HANDLE
Fridge door handle assembly
OKOK
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
each other.
the screw and then put the handle
Fastener
(DA60-00143B)
(Optional)

10_Setting Up
REMOVING THE REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.
Tools you will need
Philips screwdriver 10mm Socket Wrench Allen wrench(5mm)
Flat-blade screwdriver Pliers
Disassemble the Refrigerator doors
1.
() with a Flat head screwdriver, and close the
door.
Remove the 3 screws holding down the Top Table
and remove the Top Table( 2) AS SHOWN IN THE
2
PICTURE.
HOW TO ASSEMBLE THE HANDLES (CONT’D)
Setting up your French Door Refrigerator
With the door opened, remove the Top Table cap
Freezer / Flex zone door handle assembly
OKOK
• Please do not remove the Freezer/ Flex Zone drawer.
Handle can be attached without removing the door.
CAUTION
*Tilt up the Handle bar and turn the wrench.
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
down.
Put the handle on the xer

Setting up_11
3. Remove the three hex head bolts( 6) attached
to the upper left and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver, remove the ground
screw( 7) attached to the upper left and right door
hinges.
Remove the upper left and right door hinges( 8).
4. Lift the door straight up to remove.
5. With a Philips head screwdriver, remove the two
screws( ) attached to the lower left and right
door hinges.
With an Allen Wrench(5mm), remove the two hex
head bolts( ) attached to the lower left and right
door hinges.
Remove the lower left and right door hinges( ).
6
7
8
3
4
5
Red Clip
(1/4”)
If a red clip is on the coupler, it must be removed
before removing the tube.
CAUTION
2. Disconnect the one connector ( )
3
on left side door, pressing the middle
part while is taking away. Remove the tube
( ) with pressing strongly the dark gray
4
5
color ( ) of the water line couple, take away
the hose at the same time.
Be sure to close the door to prevent doors damage.
9
10
11
9
10
11
01 SETTING UP

12_Setting up
4. Remove four 10mm hex-head bolts from both sides.
5. Lift the freezer door up from the rails.
2. Remove the tilting pocket( ) by pulling strongly on both brackets( )
2
upward at the same time.
3. Take out the lower basket( 3) by lifting the basket up fr om
rail system.
1. rtilitnurewardreppuehthsuP eaches to the cabinet r ear wall.
DISASSEMBLE THE FREEZER DRAWER
2
3
Setting up your French Door Refrigerator

Setting Up_13
REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
1. Reattach the lower left and right door hinges( ).
spilihPahtiW head screwdriver, insert and tighten the
two screws( ) into the lower left and right door hinges.
With a Allen Wrench(5mm), insert and tighten the two hex
head bolts( ) into the lower left and right door hinges.
2. Place the hole in the bottom of the door over the lower
hinge( ).
Be careful not to miss the hinge cap because it can
.
3. Insert the upper hinges(
9
) into the holes at the top
of the doors.
With a Wrench(10mm), insert and tighten the 3 hex
head bolts(
7
) into the upper left and right door
hinges.
With a Philips head screwdriver, insert and tighten
the ground screw(
8
) into the upper left and right
door hinges.
9
7
8
01 SETTING UP

14_Setting Up
REATTACHING THE REFRIGERATOR DOORS
3
4
Red Clip
(1/4”)
Dispenser
Door Tube
Cabinet
Tube
5
3
5. Position the Top Table( 2) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap( ) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
4. Connect the water line ( 5) and then insert a
clip on the coupler with pulling tube.
Connect the one connector( 4) on left side
door and two connectors ( 3) at each side
of the top cap.
The clip is enveloped inside of the top cap.
The water line ( 5) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
CAUTION
coupler
Be sure to sensor (yellow cable) is inside the top table.
Setting up your French Door Refrigerator

Setting Up_15
ASSEMBLE THE FREEZER DRAWER
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket ( 6) into
the rail system.
5. Hook the ends of the tilting pocket ( 7) into both brackets ( 8),
and push down until they lock into place.
1. Pull out the rails to the full length on each side of the cabinet evenly.
7
8
Slot
Slot
6
CAUTION
Make sure the door is well assembled on the rail
CAUTION
If the drawer is not properly assembled on the rail, the door
will not close and it will cause frost.
01 SETTING UP

16_Setting Up
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can
make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
When the Left door is lower than the Right door.
Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise
to level the left door.
When the Left door is higher than the Right door.
Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise
to level the right door.
We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the
best way to make minor adjustments to the doors.
Screwdriver
Setting up your French Door Refrigerator

MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
Setting Up_17
1. If you open the drawer ( ), you can see the lower hinge ( 2).
2. Insert the supplied hex wrench ( 3) into the shaft ( 4) of the lower hinge.
3. Please adjust the height by turning the hex wrench ( 3) clockwise( ) or counter-clockwise( ).
when you turn the hex wrench counter-clockwise( ), the door will move up.
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
Adjustment
part
Adjustment
part
33
4
2
01 SETTING UP
1. After adjusting the doors, please insert the supplied fastener-ring ( 5) using a pair of pliers ( 6) in the
gap between the hinge-grommet ( 7) and the lower hinge( 8). The number of fastener-rings you’ll need
to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
The thickness of each fastener-ring is 0.04 inch.

18_Setting Up
ADJUSTING THE FREEZER DRAWER LEVEL
1. Locate the height-adjuster ( ) in the freezer drawer.
Unscrew the four Phillips screws ( 2) slightly to loosen the door.
2. Loosen the controller screw( 3) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
Freezer Drawer
Adjustment part
2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
Setting up your French Door Refrigerator

CHECKING THE WATER DISPENSER LINE
A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better
health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or
destroy microorganisms. You may need to purchase a water purifying system to do that.
In order for the ice maker to operate properly, a water pressure of 20~125 psi (pound per square inch) is
required.
Under normal conditions, a 170 cc (5.75 oz.) paper cup can be filled in 10 seconds.
If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to
compensate for the low pressure.
Make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser
lever until the water runs from the water outlet.
Setting Up_18
Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that
contains copper tubing.
Connecting to the water supply line
the main water supply line and tur .
2. Locate the nearest cold, drinking water line.
3. After connecting the water supply to the water filter, turn your main water supply back on and flush four
or more gallons into a bucket to clear and prime the water filter.
2
3
4
01 SETTING UP

20_Setting Up
INSTALLING THE WATER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection. You
may find these items sold as a kit at your local hardware store.
1/4” compression nut
plastic tubing
copper tubing
ferrule
Installing the water filter.
1. Remove the water filter cover( )
2. Remove the fixed cap by turning it counter clockwise.
Keep the cap in a safe place for later use if you don’t
use the filter.
3. Remove the water filter from the box and put a
replacement indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months in
the future. For example, if you install the water filter in
March, put the “SEP” sticker on the filter to remind you
to replace it in September. That way you’ll know when
it is time to replace the filter. Normally, a filter life is
about 6 months.
2 3
Sticker
(month indicator)
Only connect the water line to a drinkable water source.
If you have to r 1/4“ of the plastic tubing to make sure you get a snug,
leak-free connection.
Do not use without the molded end(Bulb) of the plastic tubing .
1. Tighten the compression nut onto the 1/4” compression fitting.
- If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on
copper tubing (not included) as shown.
- If you are using plastic tubing , insert the molded end(Bulb) of the plastic tubing into the
compression fitting.
2. Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .
3. Turn water on and check for any leakage.
CAUTION
Assembled)
Assembled)
Setting up your French Door Refrigerator