4
MAINTENANCE &CLEANING
Interior parts
Dismantle all shelves, bars, trays, covers and
drawers, and cleanwith a warmdamp cloth wiper.
Door gasket
Clean door gasketwith care. Wipethe recessed
place with chopstickwrapped with cotton strip.
Water tray
Screw offthe screw inthe compressor cover, pull
up the watertray lightly anddraw it out.Fix it as
before after washing.
Defrost approach
Thick frost layer depositing on the interior wall
will affect refrigeration effects. On that account,
you may cut off the power after taking out the
foods and placing somewhere in good package.
Wipe off the water soil with a soft cloth when the
frost layer thaws.Afterwards, switch on the power
and restart the machine toreset the temperature.
Cautions:
Never place therefrigerator upside downand
horizontally.If titling isrequired, the angle
between compartment bodyand the ground
shall be atleast 45 .
In the initial use, removethe four sponge tapes
from the glass shelf andfit the shelf.Embed the
protuberance at both sides tothe grooves to fix
them properly.
The intervals between plug pullingand plugging
shall be more than 5minutes.
Never move the refrigerator bydoor handle or
impose large force on thehandle up and down.
9
Remove the four sponge tapesfrom the glass
compartment shelf, assemble the shelfcorrectly
and embed the protuberance atboth sides to the
grooves to fix them properly.
Clean the inner and outerof the unit using warm
and wet cloth (some detergentis allowed in the
warm water)
Initiate the power one-hour later and watch the re
-frigerator top. If deepfreeze is needed, press the
deepfreeze button to activate the deepfreeze func
-tion indicated by the indicator.If deepfreeze is not
required within 3 hours, then repress the deepfreeze
button, and the deepfreeze indicator will go off,
meaning that the unit has exited the deepfreeze
status. In case that the deepfreeze function is not
cancelled manually, the unitwill quit automatically
after 3 hours. Then store the foodstuff2-3 hours later.
Caution:
After using the freezer, don't forget to shutthe drawer before closing thedoor.
Before connecting to the power, please check whether thepower voltage is in permission.
The rated voltage is 187-242V. If your power voltageis in discrepancy, an automatic
voltage transformer above 500W shallbe necessary.Youcan get the suitable products
from the market.
Suggestion: As forthe need of storing vastfood, making ice or expeditingcold air, youmay
draw out the tray and frost the food directly onthe evaporator shelf.
ASSEMBLING OFBOTTLE RACK
Fix the bottle rack ontothe glass shelf as
described in the left demonstration.
Before assembling
After assembling
PREPARATIONS BEFOREUSE
PREPARATIONS BEFOREUSE