Samsung SNP-3430H User manual

NETWORK CAMERA
User Manual SNP-3430H

Copyright
©2010 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this
document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of
Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
If the system behaves abnormally because you run a program irrelevant to the system operation.
Deteriorated performance or natural worn-out in process of time
•
•
Network Camera
User Manual

English _3
●OVERVIEW
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety, If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus.
Only use attachments/ accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lighting storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
overview

overview
4_ overview
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC
OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS
ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.

English _5
●OVERVIEW
CAUTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
The BNC output port is used to monitor the installation process of the
network camera.
If you keep the BNC cable connected, a risk of lightening may cause damage
or malfunction to the product.
Please use the input power with just one camera and other devices must not
be connected.
Precautions about the operating temperature
The product does not work in an ambient temperature of below -50˚C.
Defrosting may not work at below -50˚C depending on the installation place.
Keep the product powered at all times so that the temperature inside the product stays over
-10˚C.
Even when you warm up the product by up to -20˚C after leaving it at below -50˚C, the prod-
uct does not output the video signal and just displays the blue screen for 30 minutes before
resetting the zoom module, during which the product does not work normally.
Then, it tries to initialize the lens module every 30 minutes until the temperature inside the
product increases to the normal operating temperature.
1.
2.
3.
4.

overview
6_ overview
Please read the following recommend safety precautions carefully.
User’s Manual is a guidance book how to use the products
The meaning of the using sign in the book is following
Reference : In case of providing information for helping of product’s usages
Notice : If there’s any possibility to occur any damages for the goods and
human caused by not following the instruction
ÚPlease read this manual for the safety before using of goods and keep it in
the safe place.
y
y
Do not Place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct
sunlight, near heating equipment or heavy cold area.
Do not place this apparatus near conductive material. Do not attempt to service this apparatus yourself.
Do not place a glass of water on the product. Do not install near any magnetic sources.
Do not block any ventilation openings. Do not place heavy items on the product.

English _7
●OVERVIEW
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Samsung Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.

overview
8_ overview
CONTENTS
OVERVIEW
3
3Important Safety Instructions
10 Product Features
10 Recomended PC Specifications
11 What’s Included
12 At a Glance
INSTALLATION &
CONNECTION
16
16 DIP Switch Setting
25 Installation
30 Inserting/Removing an SD
Memory Card
31 Memory Card Information (Not
Included)
32 Connecting with other Device
NETWORK CONNECTION
AND SETUP
36
36 Connecting the Camera Directly
to Local Area Networking
37 Connecting the Camera Directly
to a DHCP Based DSL/Cable
Modem
38 Connecting the Camera Directly
to a PPPoE Modem
39 Connecting the Camera to an
IP Router with the PPPoE/Cable
Modem
40 Buttons used in IP Installer
41 Static IP Setup
44 Dynamic IP Setup
45 Port Range Forward (Port
Mapping) Setup
47 Connecting to the Camera from a
Shared Local PC
47 Connecting to the Camera from a
Remote PC via the Internet

English _9
●OVERVIEW
SETUP SCREEN
58
58 Setup
58 Audio & Video Setup
72 Network Setup
78 Event Setup
84 System Setup
APPENDIX
89
89 Specification
94 Product Overview
95 Troubleshooting
97 Open Source Announcement
99 GPL/LGPL Software License
WEB VIEWER
48
48 Connecting to the Camera
49 Login
50 Installing Silverlight Runtime
52 Using the Live Screen
56 Playback
57 Playing the Backup Recordings

overview
10_ overview
PRODUCT FEATURES
H.264/MPEG-4/MJPEG Multi-Streaming
This network camera supports the H.264/MPEG-4/MJPEG codec and can display videos
in different resolutions and qualities simultaneously with different Codecs.
MHowever, MPEG4 video can not be played on a web page. Use CMS software if you want to play
the video on a web page.

Support various communication protocols
Supports TCP/IP, UDP, RTP/RTSP, email, and FTP protocols as well as various internet
protocols such as ARP, HTTP, HTTPS and DHCP.
Web Browser-based Monitoring
Using the Internet web browser to display the image in a local network environment.
Alarm Function
If an event occurs, the event-related video will be transferred to the FTP/email specified
by the user or saved to the SD memory, or the event signal will be sent to the Alarm Out
port.
ONVIF (Spec 1.01) Compliance
This product supports ONVIF Core Spec. 1. 01.
For more information, refer to www.onvif.org.
RECOMENDED PC SPECIFICATIONS
CPU : Intel(R) Core(TM)2 2.00 GHz or higher
Operating System : Windows XP, VISTA, 7
Mac OS
Resolution : 1280X1024 pixels or higher
RAM : 1GB or higher
Web Browser :
Internet Explorer 6.0 or higher
Firefox, Google Chrome, Safari
Video Memory : 128MB or higher
y
y
y
y
y
y
y
y
y
y
y

English _11
●OVERVIEW
WHAT’S INCLUDED
Please check if your camera and accessories are all included in the product package.
Appearance Item Name Quantity Description
User Manual,
Installer S/W,
CMS S/W DVD
1
Quick Guide 1
9Pin Terminal Block 2 Used for alarm connection
4Pin Terminal Block 1 Used for RS-485 communication
3Pin Terminal Block 1 Used for power connection
L Wrench 1 Used to remove/fix the dome cover

overview
12_ overview
AT A GLANCE
Appearance
Item Description

Sunshield &
Housing Unit
Housing that protects the internal PTZ mechanism from the direct sunlight,
rain or external impact.
b
Dome safety wire Prevents the dome cover from falling.
c
Dome Cover Dome cover for the lens and unit protection.

c
b

English _13
●OVERVIEW
Inside
Item Description

PTZ Mechanism Control the PTZ operations of the camera.
b
Comm. Setup Switch Set the transfer rate and protocols.
c
ID Setup Switch Specify the camera ID.

Audio Input Port Used to connect the audio input cable.

Audio Output Port Used to connect the audio output cable.

Alarm Output Port Terminal block port that is used to connect the alarm out cable.

Alarm Input Port Terminal block port that is used to connect the alarm input cable.

Micro SD Card Slot Micro SD card slot.

Communication Port Used for RS-485 communications.

Power Port Connect the power source here.

Heater Defrost the dome cover in a low temperature by increasing the internal
temperature of the housing.

Fan Defrosts the dome cover and removes moisture.
m
Network
Connections Network cable port.
b
c









m

overview
14_ overview
Camera Wiring Interface Board
For the camera wiring, please refer to the picture below.
Alarm Input Signal
No. Name Usage
1 IN1 Alarm Input Sensor Port 1
2 IN2 Alarm Input Sensor Port 2
3 IN3 Alarm Input Sensor Port 3
4 IN4 Alarm Input Sensor Port 4
5 GND GROUND
6 IN5 Alarm Input Sensor Port 5
7 IN6 Alarm Input Sensor Port 6
8 IN7 Alarm Input Sensor Port 7
9 IN8 Alarm Input Sensor Port 8
❖
RS-485
Power Port
Alarm in/out port

English _15
●OVERVIEW
Alarm Output Signal
No. Name Usage
1 OUT1 ALARM OUT 1
2 OUT1 ALARM OUT 1
3 OUT2 ALARM OUT 2
4 OUT2 ALARM OUT 2
5 DUMMY Unused
6 OUT3 ALARM OUT 3
7 OUT3 ALARM OUT 3
8 OUT4 ALARM OUT 4
9 OUT4 ALARM OUT 4
RS-485 Communication Signal
No. Name Usage
1 RS485+ Controller Data Line
2 RS485- Controller Data Line
3 RS485+ Controller Data Line
4 RS485- Controller Data Line
Power Port
No. Name Usage
1ACAC 24V
2 F.G Earth Line
3ACAC 24V
Power supply adaptor (AC) has no polarities.
The maximum capacity of the Alarm Out port is 30V DC/1A, 125V AC/0.5A.
When connecting the camera to an external over-rated product, use a separate relay device to
ensure proper operation.
To prevent possible inflow of lightning while in test monitoring, perform the test with the FG
terminal grounded.
M
J



16_ installation & connection
installation & connection
DIP SWITCH SETTING
How to set up Protocols and ID DIP Switches
You can control various settings of the camera system using the Communication and ID
DIP switches. Before installing the product, please set up the DIP switches according to the
installation environment.
Set the switches according to your installation environment. For more detailed setup
information, please refer to the chart on the next page.
The camera may malfunction if the switches are not fully turned On/Off; please
double check the switches before finishing setup.
1.
2.
Communication Protocol DIP
Switch(SW1)
Camera ID DIP Switch
(SW2)

English _17
●INSTALLATION & CONNECTION
Communication Protocol DIP Switch Settings (SW1)
SW1 Pin No. Purpose
1~4 Protocol Settings
5~7 Baud Rate Settings
8Termination Settings
Protocol Settings
Select a communication protocol for the camera.
No. Protocol SW1-#1 SW1-#2 SW1-#3 SW1-#4
1 AUTO DETECT OFF OFF OFF OFF
2 SAMSUNG-T ON ON ON OFF
3 PELCO-D ON OFF OFF OFF
4 PELCO-P OFF ON OFF OFF
5 SAMSUNG-E ON ON OFF OFF
6 Panasonic OFF OFF ON OFF
7 GE ON OFF ON OFF
8 AD OFF ON ON OFF
9 VICON OFF OFF OFF ON
10 Honeywell
(KD6) ON OFF OFF ON
11 BOSCH OFF ON OFF ON
12 Honeywell
(VCLTP) ON ON OFF ON
y
ON ON
OFF
SW1

installation & connection
18_ installation & connection
Baud Rate Settings
Select the transfer speed of a selected communication protocol.
No. Baud Rate (BPS) SW1-#5 SW1-#6 SW1-#7
1 2400 OFF OFF OFF
2 4800 ON OFF OFF
3 9600 OFF ON OFF
4 19200 ON ON OFF
5 38400 OFF OFF ON
Termination Settings
To prevent the attenuation of communication signals between the camera and controller,
the items at the end of line must be set up with the termination settings.
Camera Input Position SW1- #8
Termination of Longest Path ON
On the Path OFF
The default value is shaded in each setting table.
To use a third party controller with this product, please contact our After-Sales Service or
Technology Department.
Camera ID DIP Switch Settings (SW2)
To set up camera IDs, refer to the “Camera ID Chart” next.
y
y
M

ON ON
OFF
SW2

English _19
●INSTALLATION & CONNECTION
Camera ID Chart
ID SW2-#1 SW2-#2 SW2-#3 SW2-#4 SW2-#5 SW2-#6 SW2-#7 SW2-#8
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
9 ON OFF OFF ON OFF OFF OFF OFF
10 OFF ON OFF ON OFF OFF OFF OFF
11 ON ON OFF ON OFF OFF OFF OFF
12 OFF OFF ON ON OFF OFF OFF OFF
13 ON OFF ON ON OFF OFF OFF OFF
14 OFF ON ON ON OFF OFF OFF OFF
15 ON ON ON ON OFF OFF OFF OFF
16 OFF OFF OFF OFF ON OFF OFF OFF
17 ON OFF OFF OFF ON OFF OFF OFF
18 OFF ON OFF OFF ON OFF OFF OFF
19 ON ON OFF OFF ON OFF OFF OFF
20 OFF OFF ON OFF ON OFF OFF OFF
21 ON OFF ON OFF ON OFF OFF OFF
22 OFF ON ON OFF ON OFF OFF OFF
23 ON ON ON OFF ON OFF OFF OFF
24 OFF OFF OFF ON ON OFF OFF OFF
25 ON OFF OFF ON ON OFF OFF OFF
26 OFF ON OFF ON ON OFF OFF OFF
27 ON ON OFF ON ON OFF OFF OFF
28 OFF OFF ON ON ON OFF OFF OFF
29 ON OFF ON ON ON OFF OFF OFF
30 OFF ON ON ON ON OFF OFF OFF
31 ON ON ON ON ON OFF OFF OFF
32 OFF OFF OFF OFF OFF ON OFF OFF
33 ON OFF OFF OFF OFF ON OFF OFF
34 OFF ON OFF OFF OFF ON OFF OFF
35 ON ON OFF OFF OFF ON OFF OFF
36 OFF OFF ON OFF OFF ON OFF OFF
37 ON OFF ON OFF OFF ON OFF OFF
38 OFF ON ON OFF OFF ON OFF OFF
39 ON ON ON OFF OFF ON OFF OFF
40 OFF OFF OFF ON OFF ON OFF OFF
41 ON OFF OFF ON OFF ON OFF OFF
y

installation & connection
20_ installation & connection
ID SW2-#1 SW2-#2 SW2-#3 SW2-#4 SW2-#5 SW2-#6 SW2-#7 SW2-#8
42 OFF ON OFF ON OFF ON OFF OFF
43 ON ON OFF ON OFF ON OFF OFF
44 OFF OFF ON ON OFF ON OFF OFF
45 ON OFF ON ON OFF ON OFF OFF
46 OFF ON ON ON OFF ON OFF OFF
47 ON ON ON ON OFF ON OFF OFF
48 OFF OFF OFF OFF ON ON OFF OFF
49 ON OFF OFF OFF ON ON OFF OFF
50 OFF ON OFF OFF ON ON OFF OFF
51 ON ON OFF OFF ON ON OFF OFF
52 OFF OFF ON OFF ON ON OFF OFF
53 ON OFF ON OFF ON ON OFF OFF
54 OFF ON ON OFF ON ON OFF OFF
55 ON ON ON OFF ON ON OFF OFF
56 OFF OFF OFF ON ON ON OFF OFF
57 ON OFF OFF ON ON ON OFF OFF
58 OFF ON OFF ON ON ON OFF OFF
59 ON ON OFF ON ON ON OFF OFF
60 OFF OFF ON ON ON ON OFF OFF
61 ON OFF ON ON ON ON OFF OFF
62 OFF ON ON ON ON ON OFF OFF
63 ON ON ON ON ON ON OFF OFF
64 OFF OFF OFF OFF OFF OFF ON OFF
65 ON OFF OFF OFF OFF OFF ON OFF
66 OFF ON OFF OFF OFF OFF ON OFF
67 ON ON OFF OFF OFF OFF ON OFF
68 OFF OFF ON OFF OFF OFF ON OFF
69 ON OFF ON OFF OFF OFF ON OFF
70 OFF ON ON OFF OFF OFF ON OFF
71 ON ON ON OFF OFF OFF ON OFF
72 OFF OFF OFF ON OFF OFF ON OFF
73 ON OFF OFF ON OFF OFF ON OFF
74 OFF ON OFF ON OFF OFF ON OFF
75 ON ON OFF ON OFF OFF ON OFF
76 OFF OFF ON ON OFF OFF ON OFF
77 ON OFF ON ON OFF OFF ON OFF
78 OFF ON ON ON OFF OFF ON OFF
79 ON ON ON ON OFF OFF ON OFF
80 OFF OFF OFF OFF ON OFF ON OFF
81 ON OFF OFF OFF ON OFF ON OFF
82 OFF ON OFF OFF ON OFF ON OFF
83 ON ON OFF OFF ON OFF ON OFF
84 OFF OFF ON OFF ON OFF ON OFF