Samsung PN43D440A5D User manual

2011 Samsung TV
2011
Samsung
TV
F/W Upgrade Guide
Samsung Electronics

Step1. How to prepare the USB Memory Drive
1D l d h fi fil f S
2. Connect the USB Memory Drive to the USB port of your PC.
Copy the file onto the USB Memory Drive
1
.
D
own
l
oa
d
t
h
e
fi
rmware
fil
e
f
rom
S
amsung.com to your computer.
File Name : T-STD4AUSHC.exe
Copy
the
file
onto
the
USB
Memory
Drive
.
3. Go to the USB Memory Drive, and then double click the file.
6 After the file unzips completely
4. Click the “Unzip” button.
6
.
After
the
file
unzips
completely
,
click the “OK” and “Close” buttons.
5. The file unzips. 7. Confirm that a folder containing the
firmware files has been added to the USB
O K
firmware
files
has
been
added
to
the
USB
memory drive.
Folder name : T-STD4AUSHC
8. Safely disconnect the USB memory drive
by right clicking the green check mark
by
right
clicking
the
green
check
mark
on the taskbar, and then left clicking
“Safely Remove”.

6P OK Th d t t
Step2. How to upgrade the Firmware
1. Turn on the TV.
2. Insert the USB Memory Drive
containing the firmware into the USB
po
rt
o
f TV.
6
.
P
ress
OK
. ,
Th
e upgra
d
e s
t
ar
t
s.
Upgrading now. Please do not disconnect USB
before upgrade is completed.
80%
po o
3. Press the MENU button, select
‘Software Upgrade’ 7. When the firmware upgrade
is complete, the TV turns off and
then back on by itself.
80%
4. The message “Scanning for USB.
It may take up to 30 seconds.” Upgrade is completed. Power will be off
3seconds and turn on again automatically.
OK
Scanning for USB.
It may take up to 30 seconds.
5. If the TV finds a valid firmware version,
it displays the message below.
Upgrade version 000000 to version 001013?
The system will be reset after upgrade.
OK Cancel

Cautions
While upgrading,
Do not pull the USB Memory drive out.
Do not unplug the power cable.
Do not turn off the TV.
※
Warning
※
Warning
Pulling the USB Memory drive out or unplugging the power cable will cause a
firmware error or main board failure. Firmware errors and main board failures are
not covered by Samsung warranty policy.