San Jamar VENUE CSD100 User manual

VENUE®COFFEE SLEEVE DISPENSER
Thank you for choosing the Venue Coffee Sleeve Dispenser CSD100 from San Jamar. We appreciate your business
and are condent this high-capacity dispenser will help improve the image and efciency of your operation. Enjoy!
Mount the dispenser - use the
suction cup feet to secure the
unit to the countertop.
Use a screw driver and the
included screws to install the
suction cup feet.
Insert sleeves - load the
sleeves until at full capacity.
Close cover - return the cover
to the starting position. Press
down on the cover until the
side tabs lock in place.
Open cover - gently lift out and up on the side tabs to release the
cover. Open cover to rest completely open.
Pull back and hold the push
plate in place.
COUNTER MOUNT & LOADING DISPENSER
2.
1.
4. 5. 6.
3a.
3b.

103260
San Jamar
555 Koopman Lane
Elkhorn, Wisconsin 53121
USA
T: +1.262.723.6133
F:
+1.262.723.4204
[email protected]
www.sanjamar.com
Canada
15252 32nd Avenue
Suite 309
Surrey, BC V3S 0R7
CANADA
T: +1.262.723.6133
F: +1.262.723.4204
[e-mail]
Europe
Schoorstraat 26a, bus 1
2220 Heist op-den Berg
BELGIUM
T: [phone]
F: [phone]
[e-mail]
México
Av. Paseo de la Reforma No. 350 - 10
Col. Juarez
Deleg. Cuauhtemoc, CP 06600
MEXICO, D.F.
T: [phone]
[e-mail]
© Cop
yright San Jamar, Inc. 2016
Open cover - gently lift out and up on the
side tabs to release the cover. Open cover
to rest completely open.
Install mounting screws - use appropriate
screws for mounting surface.
Mark the area - hold the dispenser level
on the wall with the cover open. Use a
pencil to mark where mounting screws
will be installed.
Close cover - return the cover to the
starting position. Press down on the cover
until the tabs lock in place.
WALL MOUNTING
3. 4.
2.1.
VENUE®COFFEE SLEEVE DISPENSER