S&S Cycle Viola V-Twin 2015 SSVT User manual

510-0345
VIOLA V-TWIN® •QUALITY SERVICE PARTS CATALOG 2015
Service!
The S&S Service and Speed Center is ready to take care of your machine shop, performance upgrade, and custom engine needs.With
experienced and knowledge technicians, and state of the art equipment and tools, we can get the job done…guaranteed.
Speed!
warranty on all their work? Answer – the S&S Service and Speed Center.
Remanufacturing and Repair
•
Remanufacture S&S engines to original factory specs
•
Remanufacture S&S Carburetors
•
Remanufacture S&S cylinder heads
•
– Rebuild rods, install thrust washers, rebalance, and replace unserviceable parts
•
Stock engine rebuilds 1966 – present big twin
•
•
Rebuild stock cylinder heads for 1966-present big twins
Performance Upgrades
• Install an S&S Hot Set Up Kit® in stock 1966-present big twin crankcases including late model“A”and“B”big twin engines
•
Update stock heads for Harley-Davidson® 883cc Sportster® models to 1200cc size valves
Compression ratio increase – Machine gasket surfaces of cylinder heads, cylinders, or cases, and installation of high compression pistons
Machine Shop Services
•
Bore stock engine cases to accept big bore cylinders
•
•
Timken® bearing conversions on 2003 – Up stock Harley-Davidson“A”and“B”crankcases
Custom Engine Building
•
•
•
Custom cosmetic treatments – powdercoating (available colors only), polishing, diamond cutting, and nonstandard combinations
V I S I T
S S C Y C L E . C O M / S S C E N T E R
F O R M O R E I N F O
®
®
www.violavtwin.com [phone]

About Viola V-Twin®
S&S Cycle is extremely pleased to launch a selection of high quality service parts for Harley-Davidson® and other American v-twin motorcycles;Viola
V-Twin®! Anyone familiar with S&S Cycle will recognize the name of the small village ofViola,Wisconsin where S&S has been located since 1969. Now,
based on customer demand, and the fact that many of our dealers depend on service work for a growing portion of their livelihood, we are expanding
our product oering to include service/repair parts for stock v-twin engines. It is our aim to simplify your life, and to help you grow your business by
providing the quality service parts you need to service your customer’s needs.Think ofViola V-Twin as your trusted business partner, here to save you
time and money, making it easier to nd the service parts you need every day. Don’t turn away work because of parts availability!
Quality Does Not Cost More…It Pays More!
Quality service parts are getting harder to nd, but your customers deserve nothing less. Besides, one service call-back due to a part problem can eat
up any prot you made on a job!The aim ofViolaV-Twin is to give your shop access to quality service parts that meet or exceed OEM specications, so
you can take in more work, and so that every job is successful and protable.
ViolaV-Twin is starting out as an oering of select S&S parts that can be used to support the needs of basic, day-to-day service work. So far, the
concept has been well received in the market, but we’re not stopping there.We realize that our product lineup needs to grow and evolve over time to
positionViolaV-Twin as the one-stop, rst-call service parts solution that smart independent shops are looking for. S&S will manufacture many of the
parts, but in order to ll out our product oering, we intend to seek out and source quality service parts from other manufacturers.These products will
be made in the U.S. if at all possible, but either way all will be endorsed by S&S.
Help Us Help You!
If you are having trouble nding certain parts, why not let us know what you need?That will help us prioritize future additions to theViolaV-Twin
product line.To suggest parts for the catalog, send us an email at [email protected]om, call your S&S customer service representative at 866-244-2673,
or log on to theViola V-Twin website at www.violavtwin.com and use the product suggestion form under the“Contact”menu.
ViolaVTwin.com
The entire catalog of quality service parts is available online. Download the entire catalog to your desktop for easy reference. Sign up for our notication
serivce to keep up-to-date with our lastest product oernings.
Your S&S Dealer Number
Phone: [phone]
Email: [e-mail]
www.violavtwin.com
Check out the back inside cover for more detailed features of violavtwin.com!
Homepage
Easily navigate to what you are looking for
and sign up for our notication serivce to keep
up-to-date with our lastest product oernings.
Using the dealer locator, customers can
quickly search for the nearest dealer.
Online Catalog
The entire catalog of quality service parts is
available online in an interactive format.
Or download the entire catalog to your device
for easy reference. Use the search tool to nd
what you are looking for in an instant.
ViolaVTwin.com
Help Us Help You!
If you are having trouble nding certain parts, let
us know what you need!This will help us prioritize
future additions to theViolaV-Twin product line.To
suggest parts for the catalog, send us an email at
[e-mail], call your S&S customer service
representative at 866-244-2673, or log on to
www.violavtwin.com and use the product suggestion
form under the“Contact”menu.

About Viola V-Twin®
S&S Cycle is extremely pleased to launch a selection of high quality service parts for Harley-Davidson® and other American v-twin motorcycles;Viola
V-Twin®! Anyone familiar with S&S Cycle will recognize the name of the small village ofViola,Wisconsin where S&S has been located since 1969. Now,
based on customer demand, and the fact that many of our dealers depend on service work for a growing portion of their livelihood, we are expanding
our product oering to include service/repair parts for stock v-twin engines. It is our aim to simplify your life, and to help you grow your business by
providing the quality service parts you need to service your customer’s needs.Think ofViola V-Twin as your trusted business partner, here to save you
time and money, making it easier to nd the service parts you need every day. Don’t turn away work because of parts availability!
Quality Does Not Cost More…It Pays More!
Quality service parts are getting harder to nd, but your customers deserve nothing less. Besides, one service call-back due to a part problem can eat
up any prot you made on a job!The aim ofViolaV-Twin is to give your shop access to quality service parts that meet or exceed OEM specications, so
you can take in more work, and so that every job is successful and protable.
ViolaV-Twin is starting out as an oering of select S&S parts that can be used to support the needs of basic, day-to-day service work. So far, the
concept has been well received in the market, but we’re not stopping there.We realize that our product lineup needs to grow and evolve over time to
positionViolaV-Twin as the one-stop, rst-call service parts solution that smart independent shops are looking for. S&S will manufacture many of the
parts, but in order to ll out our product oering, we intend to seek out and source quality service parts from other manufacturers.These products will
be made in the U.S. if at all possible, but either way all will be endorsed by S&S.
Help Us Help You!
If you are having trouble nding certain parts, why not let us know what you need?That will help us prioritize future additions to theViolaV-Twin
product line.To suggest parts for the catalog, send us an email at [e-mail], call your S&S customer service representative at 866-244-2673,
or log on to theViola V-Twin website at www.violavtwin.com and use the product suggestion form under the“Contact”menu.
ViolaVTwin.com
The entire catalog of quality service parts is available online. Download the entire catalog to your desktop for easy reference. Sign up for our notication
serivce to keep up-to-date with our lastest product oernings.
Your S&S Dealer Number
Phone: [phone]
Email: [e-mail]
www.violavtwin.com
Check out the back inside cover for more detailed features of violavtwin.com!
Homepage
Easily navigate to what you are looking for
and sign up for our notication serivce to keep
up-to-date with our lastest product oernings.
Using the dealer locator, customers can
quickly search for the nearest dealer.
Online Catalog
The entire catalog of quality service parts is
available online in an interactive format.
Or download the entire catalog to your device
for easy reference. Use the search tool to nd
what you are looking for in an instant.
ViolaVTwin.com
Help Us Help You!
If you are having trouble nding certain parts, let
us know what you need!This will help us prioritize
future additions to theViolaV-Twin product line.To
suggest parts for the catalog, send us an email at
[email protected], call your S&S customer service
representative at 866-244-2673, or log on to
www.violavtwin.com and use the product suggestion
form under the“Contact”menu.

Table of Contents
Parts for
Sportster
1986-2015
Parts for
Sportster
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution
1984-1999
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88
1999-2006
Twin Cam 96™ & 103™ 2007-2015
Alternator and Regulator..................................... 32
Camshafts and Cam Cover.................................... 12
Clutch ..................................................... 30
Complete Job Kits ............................................ 2
Crankcases and Engine Oil Filter............................... 10
Cylinder, Head and Valves ..................................... 4
Engine Sensors ............................................. 18
Ignition Module ............................................ 16
Induction Module and Air Filter ............................... 14
Piston and Flywheel Assembly................................. 8
Primary Housing............................................ 22
Rocker Arm Assembly and Pushrods ............................ 6
Starters.................................................... 20
Transmission Bearings and Covers ............................. 26
Transmission Gears.......................................... 28
Transmission Housing and Oil Tank ............................ 24
Twin Cam 88® 1999-2006
Alternator and Regulator..................................... 56
Belts, Chains and Sprockets................................... 70
Camshafts and Cam Cover....................................44
Carb, Manifold and Air Filter ..................................46
Clutch .....................................................68
Complete Job Kits ........................................... 34
Crankcases and Engine Oil Filter............................... 42
Cylinder, Head and Valves .................................... 36
Engine Sensors ............................................. 52
Gear Shifter ................................................60
Ignition Module and Coil ..................................... 50
Induction Module and Air Filter ...............................48
Piston and Flywheel Assembly................................40
Rocker Arm Assembly and Pushrods ........................... 38
Starter .................................................... 54
Transmission Bearing and Covers .............................. 62
Transmission Housing and Oil Tank ............................ 64
Evolution® Models, 1984-1999
Alternator and Regulator.....................................90
Belt, Chains and Sprockets .................................. 110
Cam Position Sensor......................................... 96
Carburetor .................................................88
Clutch ....................................................104
Complete Job Kits ........................................... 72
Crankcase.................................................. 82
Crankcase Gear Side ......................................... 84
Cylinder, Head and Valves .................................... 76
Ignition Module and Coil ..................................... 92
Induction Module ........................................... 98
Oil Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Pistons, Connecting Rods and Flywheels ....................... 80
Primary Housing...........................................106
Rocker Arm and Pushrods .................................... 78
Starters.................................................... 94
Transmission Gears......................................... 102
Transmission Housing ......................................100
Sportster® Models, 1986-2015
Access Door and Primary Cover............................... 126
Alternator and Regulator.................................... 138
Belts, Chains and Sprockets..................................146
Carburetor ................................................ 132
Crankcase................................................. 124
Cylinder, Head and Valves ................................... 114
Gearcase and Cover......................................... 128
Ignition and Coil ...........................................140
Induction Module .......................................... 134
Oil Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Pistons, Connecting Rods and Flywheels ...................... 122
Rocker Arms, Covers and Pushrods............................ 118
Shifter....................................................144
Starters................................................... 136
Transmission Gears......................................... 142
Shovelhead Models
Alternator Gearcover ....................................... 172
Crankcase................................................. 176
Cylinder, Head and Valves ................................... 156
Flywheels.................................................166
Generator Gearcover........................................168
Manifold.................................................. 182
Oil Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Rocker Arm, Cover and Pushrod ..............................164
Panhead Models
Crankcase................................................. 202
Cylinder, Head and Valves ................................... 190
Flywheels ................................................196
Generator Gearcover ....................................... 198
Kicker ...................................................206
Oil Pump .................................................208
Rocker Arms and Pushrods .................................194
Knucklehead Models
Connecting Rods and Flywheels ............................. 218
Crankcase ................................................224
Cylinder, Head and Valves .................................. 214
Generator Gearcover .......................................220
Kicker ...................................................228
Oil Pump .................................................230
Flathead Models
Kicker ...................................................238
UL Cylinder ...............................................234
Cross Reference Charts
OEM to VVT Cross Reference Chart............................240
VVT to OEM Cross Reference Chart............................254
Engine Rebuild Program ....................................270

Parts for
Sportster®
1955-1985
QUALITY SERVICE PARTS
V-TWIN ®
2
Index
Cross Reference Parts for
Flatheads Parts for
Knuckleheads Parts for
Panheads Parts for
Shovelheads Parts for
Sportster
1986-2012
Parts for
Evolution
1984-1999
Parts for
TwinCam 88
1999-2006
Parts for
TwinCam 96™/103™
2007-2015
2007-2015 Harley-DaviDson big twins anD 2006 Dyna
Complete Job Kits — everything you need to do the job
TOP END REBUILD Contains VVT Part No.
Top End Rebuild 3.750" Bore Re-Ring Only 05-'15 bt 900-0636
contains
Gasket, Kit, Top End, w/Hat Style Valve Stem Seal 900-0572
Rings, 3.750" Bore Stock H-D Pistons 940-0022
Top End Rebuild 3.8750" Bore Re-Ring Only 05-'15 bt 900-0637
contains
Gasket, Kit, Top End, w/Hat Style Valve Stem Seal 900-0573
Rings, 3.875" Bore Stock H-D Pistons 940-0023
Top End Rebuild 3.875" Bore 07-Up 900-0638
contains
Gasket, Kit, Top End, w/Hat Style Valve Stem Seal 900-0573
Piston, Set, 3-7/8", Standard, -2cc Dome, w/Wristpin
& Keepers, Wiseco, .927" Wp, 9:1 CR, 2007-'15 bt
920-0098
Top End Rebuild 3.875" + .010" Bore 07-Up 900-0639
contains
Gasket, Kit, Top End, w/Hat Style Valve Stem Seal 900-0573
Piston, Set, 3-7/8", +.010", -2cc Dome, w/Wristpin
& Keepers, Wiseco, .927" Wp, 9:1 CR, 2007-'15 bt
920-0099
COMPLETE ENGINE OVERHAUL Contains VVT Part No.
Complete Engine Overhaul, 3.875" Bore 07-Up bt 310-0447
contains
Gasket, Kit, Engine, Complete, 3-7/8" Bore 310-0408
Piston, Set, 3-7/8", Standard, -2cc Dome, w/Wristpin
& Keepers, Wiseco, .927" Wp, 9:1 CR, 2007-'15 bt
920-0098
Complete Engine Overhaul, 3.875" Bore +.010" 07-Up bt 310-0448
contains
Gasket, Kit, Engine, Complete, 3-7/8" Bore 310-0408
Bearing, Inner, Needle, Cam (2) 31-4499
Piston, Set, 3-7/8", +.010", -2cc Dome, w/Wristpin
& Keepers, Wiseco, .927" Wp, 9:1 CR, 2007-'15 bt
920-0099
ENGINE CHANGE Contains VVT Part No.
Engine Change 07-Up Touring 310-0449
contains
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/xl, 106-5029
Seal,Intake,Stock Heads,84-Up bt,86-Up xl (2) 16-0236
Gasket, Engine To Transmission 560-0094
Hardware Kit;Crankcase;Stator Bolts;1999 31-0113
Gasket,Throttle Body,TBW,08-Up Touring,09-Up 106-2643
Gasket,Kit,Primary,Rebuild,2007-Up FL 560-0037
Engine Change 07-Up Softail, 06-Up Dyna 310-0450
contains
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/
xl (2)
106-5029
Seal,Intake,Stock Heads,84-Up bt,86-Up xl (2) 16-0236
Gasket, Engine to Transmission 560-0094
Hardware Kit;Crankcase;Stator Bolts;1999 31-0113
Gasket,Backplate,1991-up xl/bt 106-6022
Gasket,Kit,Primary,Rebuild,2006 Up Dyna, 2007-Up
Softail
560-0038
CAM SERVICE Contains VVT Part No.
Cam Service w/Stock Cams 07-Up, 06-Up Dyna 330-0304
contains
Camshaft Set, Chain Drive, 475C, 006 Dyna, 07-Up bt 330-0293
Installation Kit,Cam,Chain Drive,06 Dyna,07-Up bt 106-5929
Tappet,Set,Hydraulic,99-Up bt,00-Up xl 33-5350
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/xl (2) 106-5029
Gasket;Set;Tappet Cover;1999-Up bt 33-5303-2
Pushrod,Kit,Quickee,Hydraulic Tappets, w/ Keepers 106-6051
Order tOll free 866-244-2673
Cam Service w/o Cams 07-Up, 06-Up Dyna 330-0305
contains
Installation Kit,Cam,Cd,06 Dyna,07-Up bt 106-5929
Tappet,Set,Hydraulic,99-Up bt,00-Up xl 33-5350
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/
xl (2)
106-5029
Gasket;Set;Tappet Cover;1999-Up bt 33-5303-2
Pushrod,Kit,Quickee,Hydraulic Tappets, w/ Keepers 106-6051
CAM CHAIN TENSIONER SERVICE Contains VVT Part No.
Cam Chain Tensioner Service '07-Up, '06-Up Dyna 330-0306
contains
Tensioner, Cam Chain, Primary, 2007-Up bt, '06-Up
Dyna
330-0283
Tensioner, Cam Chain, Secondary, 2007-Up bt, '06-Up
Dyna
330-0284
Gasket,Gearcover,Black,Paper,99-Up bt 31-2032-S
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/
xl (2)
106-5029
Pushrod,Kit,Quickee,Hydraulic Tappets, w/ Keepers 106-6051
LIFTER SERVICE Contains VVT Part No.
Lifter Service w/Pushrods 99-Up bt 330-0307
contains
Tappet,Set,Hydraulic,99-Up bt,00-Up xl 33-5350
Gasket;Set;Tappet Cover;1999-Up bt 33-5303-2
Pushrod,Kit,Quickee,Hydraulic Tappets, w/ Keepers 106-6051
Lifter Service w/Stock Pushrods 99-Up, bt 330-0308
contains
Tappet,Set,Hydraulic,99-Up bt,00-Up xl 33-5350
Gasket;Set;Tappet Cover;1999-Up bt 33-5303-2
Gasket,Kit,Rockercover,Stock,1999-Up bt 900-0534
O-ring,Kit,Pushrod Cover,1984-up bt, 1986-2003 xl 93-4022
REPLACE MAIN SEAL Contains VVT Part No.
Replace Main Seal 07-Up Touring 310-0451
contains
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Seal,Left,Main Bearing, 99-Up bt 31-4035
Replace Main Seal 07-Up Softail, 06-Up Dyna 310-0452
contains
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up 560-0049
Seal,Left,Main Bearing, 99-Up bt 31-4035
REPLACE CHARGING SYSTEM Contains VVT Part No.
Replace Charging System 11-13 Touring 550-0425
contains
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2011-2013 FLH 550-0292
Replace Charging System 09-10 Touring W/O Oil Cooler 550-0425
contains
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, w/o Oil Cooler 550-0290
Replace Charging System 09-10 w/Oil Cooler 550-0427
contains
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, w/Oil Cooler 550-0291
Replace Charging System 07-08 Touring 550-0428
contains
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2007-2008 FLH 550-0289

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Harley-Davidson®Twin Cam 96™& 103™Models
3
Visit us at www.ViOlaVtwin.cOm
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier
slightly in appearance. Line drawings are a typical representation and may not be an exact
match. Please conrm the required stock part number for intended application before order-
ing. All reference to H-D part numbers are for identication purposes only. We are in no way
implying that any of the VVT products are original equipment parts or that they are equivalent
to the corresponding H-D part number shown.
Replace Charging System Dyna 12-13 550-0429
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up 560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2008-2011 Dyna 550-0294
Replace Charging System Dyna 08-11 550-0430
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2012-2013 Dyna 550-0296
Replace Charging System Dyna 06-07 550-0431
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2006-2007 Dyna 550-0285
Replace Charging System Softail 12-13 550-0432
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2012-2013 Softail 550-0297
Replace Charging System Softail 08-11 550-0433
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2008-2011 Softail 550-0295
Replace Charging System Softail 07 550-0434
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Charging System, Complete, 2007 Softail 550-0286
REPLACE STARTER Contains VVT Part No.
Replace Starter, Black Touring 07-Up 550-0435
contains
Starter,1.4Kw,Black,2006-Up Dyna,2007 550-0273
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Shaft, Starter Motor, Oil Seal, '06-Up Dyna, '07-Up bt 550-0387
Replace Starter, Chrome, Touring 07-Up 550-0436
contains
Starter,1.4Kw,Chrome,2006-Up Dyna,2007 -Up bt 550-0274
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Oil Seal, Starter Motor Shaft, '06-Up Dyna, 07-up bt 550-0387
Replace Starter Black, 07-Up Softail, 06-Up Dyna 550-0437
contains
Starter,1.4Kw,Black,2006-Up Dyna,2007-Up bt 550-0273
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/xl (2) 106-5029
Oil Seal, Starter Motor Shaft, '06-Up Dyna, 07- up bt 550-0387
Replace Starter Chrome, 07-Up Softail, 06-Up Dyna 550-0438
contains
Starter,Mtr,1.4Kw,Chrome,2006-Up Dyna,'07-Up bt 550-0274
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up
Softail
560-0049
Gasket,Exhaust,Tapered,Stainless Steel,'84-'15 bt/xl (2) 106-5029
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Oil Seal, Starter Motor Shaft, '06-Up Dyna, 07-up bt 550-0387
Replace Starter Clutch Touring 07-Up 550-0439
contains
Starter Clutch, w/Bearing, 2009-Up bt 550-0373
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Oil Seal, Starter Motor Shaft, '06-Up Dyna, 07-up bt 550-0387
Replace Starter Clutch Dyna 06-Up, Softail 07-Up 550-0440
contains
Starter Clutch, w/Bearing, 2007-Up bt 550-0373
Gasket,Out,Primary Cover,2006 Up Dyna,'07-Up Softail 560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Oil Seal, Starter Motor Shaft, '06-Up Dyna, 07-up bt 550-0387
CLUTCH SERVICE Contains VVT Part No.
Clutch Service Touring 07-Up 560-0149
contains
Gasket,Out,Primary Cover,2007-Up FL 560-0047
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Plate, Set, Friction, 1998-Up bt 560-0128
Plate, Set, Clutch Steels, 1998-Up bt 560-0129
Clutch Service Softail 07-Up, Dyna 06-Up 560-0150
contains
Gasket,Out,Primary Cover,2006 Up Dyna,'07-U 560-0049
Gasket,Derby Cover,5 Hole,(Replaces O-Ring) 560-0074
Plate, Set, Friction, 1998-Up bt 560-0128
Plate, Set, Clutch Steels, 1998-Up bt 560-0129
gasKet Kits
oil Filters
Description OEM Part No. VVT Part No.
Gasket Kit, Complete, 3.750" Bore, 2007-Up Softail 17053-99B 310-0405
Gasket Kit, Complete, 3.875" Bore, 2007-Up Softail 310-0406
Gasket Kit, Complete, 3.750" Bore, 2007-Up FL 17053-99XX 310-0407
Gasket Kit, Complete, 3.875" Bore, 2007-Up FL 310-0408
Gasket Kit, Complete, 3.750" Bore, 2006-Up Dyna 310-0409
Gasket Kit, Complete, 3.875" Bore, 2006-Up Dyna 310-0410
Gasket Kit, Complete, 3.750" Bore, 1999-'06 SoftaiL,
1999-'05 Dyna 310-0411
Gasket Kit, Complete, 3.750" Bore, 1999-'06 FL 310-0412
Gasket Kit, Top End, 3.750" Bore w/Hat Style Valve
Stem Seal 2005-Up bt 17045-99C
900-0572
Gasket Kit, Top End, 3.875" Bore w/Hat Style Valve
Stem Seal 2005-Up bt 900-0573
lubriCants
Description VVT Part No.
S&S 20w50 Premium Synthetic Engine Oil 310-0285
S&S 20w50 Heavy Duty Engine Oil 310-0287
S&S Petroleum 25w60 Engine Oil 310-0289
S&S 75w140 Premium Synthetic Transmission Oil 310-0292
S&S 85w140 Heavy Duty Transmission Oil 310-0291
S&S 85w Extreme Duty Primary Oil 310-0290
Description OEM Part No. VVT Part No.
1999-2015 Twin Cam Oil Filter black 63731-99A 31-4103
1999-2015 Twin Cam Oil Filter black 12 pack 310-0241
1999-2015 Twin Cam Oil Filter chrome 63798-99A 31-4104
1999-2015 Twin Cam Oil Filter chrome 12 pack 310-0242

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Order tOll free 866-244-2673
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
4
CylinDer, HeaD anD valve serviCe parts
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 O-ring,(-155),3.987" ID x 4.193" OD,Viton (2) 11256 50-8048
2 Head Bolt,w/ Washer,12 pt,3/8-16 x 3.384" x .950" TD (4) See chart for complete Head Bolt Kit 16478-85A —
3 Head Bolt,w/ Washer,12 pt,3/8-16 x 2.170" x .950" TD (4) See chart for complete Head Bolt Kit 16480-92A —
4 Cylinder Assembly, Front or Rear, w/piston, rings, piston pin, & retaining rings, 3.750" Bore (silver) for 2006 Dyna models (2) 16525-99 —
Cylinder Assembly, Front or Rear, w/piston, rings, piston pin, & retaining rings, 3.750" Bore (black) for 2006 Dyna models (2) 16526-99 —
Cylinder Assembly, Front or Rear, w/piston, rings, piston pin, & retaining rings, 3.750" Bore (silver) for Twin Cam 96™ models (2) 17459-07 —
Cylinder Assembly, Front or Rear, w/piston, rings, piston pin, & retaining rings, 3.750" Bore (black) for Twin Cam 96™ models (2) 17458-07 —
Cylinder Assembly, Front or Rear, w/piston, rings, piston pin, & retaining rings, Cylinder, Kit, 3-7/8" Bore, 4.937", 4" Stroke,
92-1200,WBlack, 1999-2006 bt, 11 Fin For Twin Cam 103™ models
See chart for compatible Cylinder Set
17460-07A —
5 Pin,Dowel,.437" x .610",Steel (4) each 16595-99A 50-8177
Pin,Dowel,1999-up bt,4 Pack 50-8177-4
6 Collar Guide, exhaust only (2) 16606-05 —
7Stud, Exhaust Port, 5/16-18, 5/16-24 x 1.910", Zinc, Steel each 16715-83 50-0493
Stud, Exhaust Port, 5/16-18, 5/16-24 x 1.910", Zinc, Steel 5 Pack 50-1028
8Cylinder Head, front w/guides, seats, & collars (silver) 17106-06 —
Cylinder Head, rear w/guides, seats, & collars (silver) 17112-06 —
Cylinder Head, front w/guides, seats, & collars (black) 17178-06 —
Cylinder Head, rear w/guides, seats, & collars (black) 17179-06 —
Cylinder Head, front, w/guides, & seats (black) 17721-08 —
Cylinder Head, front, w/guides, & seats (silver) 17724-08 —
Cylinder Head, rear, w/guides, & seats (silver) 17181-06 —
9 Gasket,Head,Stock Pattern,.043",3-3/4",Graphite,304 SS,1999-up bt (2) each 16775-99B 93-1045-S
Gasket,Head,Stock Pattern,.045",3.940",Layer Steel,1999-up bt See chart for compatible Head Gasket 16787-99A —
10 Stud,Cylinder Base,3/8-16 UNC x 6.070",Black,Steel each 16715-83 310-0437
Stud,Cylinder Base,3/8-16 UNC x 6.070",Black,Steel,1999-up bt,8 Pack 310-0438
12 Insert, exhaust valve seat (2) 18011-86 —
Insert, exhaust valve seat - 0.005 O.S. (2) 18124-83A —
13 Insert, intake valve seat (2) 18020-83 —
Insert, intake valve seat - 0.005 O.S. (2) 18134-83A —
14 Intake Valve, Blue Collar, 7mm (2) 18074-05A 900-0752
15 Exhaust Valve, 7mm (2) 18085-05B 900-0753
16 Valve Stem Oil Seal, Tophat Style 2005-up bt 25 Pack See chart for additional options 18094-02 900-0590
Valve Stem Oil Seal, Tophat Style 2005-up bt 4 Pack See chart for additional options 16465-06 900-0625
17 Valve Guide, intake & exhaust (4) 16465-06 900-0782
Valve Guide, intake/ exhaust, 05-up bt +.001" – 900-0786
Valve Guide, intake/ exhaust, 05-up bt +.002" – 900-0787
Valve Guide, intake/ exhaust, 05-up bt +.010" – 900-0788
18 Valve Spring (4) See chart #24 for complete Valve Spring kit 18245-02 —
19 Collar, Valve Spring (4) See chart #24 for complete Valve Spring kit 18258-02 —
20 Retainer, Valve Collar (8) See chart #24 for complete Valve Spring kit 18260-02 —
21 Nut,HSFH,5/16-24 UNF-2B x .283",Zinc,Steel each
7593
50-5025-S
Nut,HSFH,5/16-24 UNF-2B x .283",Zinc,Steel,2 Pack 50-5025-2
Nut,HSFH,5/16-24 UNF-2B x .283",Zinc,Steel,5 Pack 50-1001
22 O-ring,(-013),.437" ID x .565" OD,Viton each 11105, 11273 50-8008
O-ring,Oil Return,(-013),.437" ID x .565" OD,Viton,10 Pack 50-8078
23 Gasket Kit, Top End, 3.750" bore w/hat style valve stem seal 2005-up bt 17045-99C 900-0572
Gasket Kit, Top End, 3.875" bore w/hat style valve stem seal 2005-up bt 900-0573
Gasket Kit, Complete, 3.750" bore, 2007-up Softail 17053-99B 310-0405
Gasket Kit, Complete, 3.875" bore, 2007-up Softail – 310-0406
Gasket Kit, Complete, 3.750" bore, 2007-up FL 17053-99XX 310-0407
Gasket Kit, Complete, 3.875" bore, 2007-up FL – 310-0408
Gasket Kit, Complete, 3.750" bore, 2006-up Dyna – 310-0409
Gasket Kit, Complete, 3.875" bore, 2006-up Dyna – 310-0410

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D® part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Harley-Davidson®Twin Cam 96™& 103™Models
5
Not Direct Service PartS (SolD aS aSSembilieS) Note: These products are compatible services as assemblies.
# Description VVT Part No.
2, 3 Head Bolt, Kit, Stock Heads, 12 pt, 1999-2012 bt (bolts and washers for two cylinder heads) 93-3014
Head Bolt,w/Washer,12 pt,3/8-16 x 3.384" x .950" TD 93-3030
Head Bolt,w/Washer,12 pt,3/8-16 x 2.170" x .950" TD 93-3031
4Cylinder, Set, 3-7/8" Bore, 4.937", Silver, 1999-up bt,11 Fin for 95" or 103" 910-0207
Cylinder, Set, 3-7/8" Bore, 4.937", WBlack,1999-up bt, 11 Fin for 95" or 103" 910-0208
9Gasket,Head,Stock Pattern,.045",3.940",Layer Steel,1999-up bt each 106-3714
Gasket, Head, Stock Pattern, .045", 3.927", '99-up bt, 10 Pack 900-0218
16 Seal,Valve Guide, 2005-2012 bt*(Does not have or work with integral bottom collar) for .562" O.D. guides,Viton each 106-5688
24 Spring, Kit, Valve, .585", Steel, (7mm valve stem), 2005-2012 bt 900-0594
*Not legal for sale or use on CA or EPA pollution controlled vehicles.
S&S .585" Lift Dual Valve Springs
24
20
19
18
16
17
6
7
21
12
13
14
15 9
5
4
22
23 1
8
10
3
2

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
6
roCKer arm assembly anD pusHroDs
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 Bolt, 5/16-18 X 2-3/4 hex. hd. (Grade 8 steel) (4) 3500 —
2 Screw,HHC,Flanged,5/16-18 x 2-1/2",Zinc,Steel (4) 3501 50-0123
3 Screw, 5/16-18 X 1.0 hex hd., w/lockpatch (6) 3692A 500-0318
4 Screw, 5/16-18 X 1-3/4 hex hd., w/lockpatch (10) 3693A 500-0319
5 Screw, 5/16-18 X 1-1/4 hex ange w/lockpatch (8) 3736A —
6 Screw, 1/4-20 X 2-1/4 hex head ange (grade 8) (4) 3746 —
7 Screw,SHCS,w/ Flat Washer,1/4-20 x 1",Zinc,ASTM A574-92A each 4741A 50-0092-S
Screw,SHCS,w/ Flat Washer,1/4-20 x 1",Zinc,ASTM A574-92A,4 Pack 50-0092P
8 Washer,Flat,.344" x .688" x .065",Zinc,Steel (8) 6320, 70907-07, 6016, 6702 50-7034
9 Washer,Flat,.715" x .950" x .031",Steel (4) each 6762B 50-7131
10 O-ring, Middle, pushrod cover, (-115), .687" ID x .875" OD, Black, Nitrile (4) each See chart for complete Pushrod O-ring Kit 11132A 50-8038
11 O-ring, Bottom, pushrod cover, (-118), .875" ID x 1.062" OD,Viton (4) each See chart for complete Pushrod O-ring Kit 11145A 50-8037
12 O-ring, (-114), .625" ID x .812" OD, Black, Viton (2) each Also available in the Gasket Kit, see chart 11270 50-8033
13 O-ring,Top, Pushrod Cover, (-209), .687" ID x .937" OD, Viton each See chart for complete Pushrod O-ring 11293, 11157, 11101, 11190 50-8039
14 Gasket, rocker housing (2) Also available in the Gasket Kit, see chart 16719-99B 90-4071-S
16 Rocker Arm,Assembly,RE/FI,Non-Roller,1.625:1 Ratio,8620,1984-up bt, 1986-2003 xl (2) 17360-83A 900-4119RA
17 Rocker Arm,Assembly,FE/RI,Non-Roller,1.625:1 Ratio,8620,1984-up bt, 1986-2003 xl(2) 17375-83A 900-4119FA
18 Gasket,Rocker Cover,Steel,1999-up bt (2) each Also available in the Gasket Kit, see chart 17386-99A 90-4096-S
Gasket, Rocker Cover, Steel, 1999-up bt (2) 2 Pack Also available in the Gasket Kit, see chart 900-0438
19 Bushing, rocker arm (8) 17429-91, 17428-57 900-0784
20 Rocker Cover, chrome (2) See chart for complete Rocker Box Kit 17572-99 —
Rocker Cover, polished (2) See chart for complete Rocker Box Kit 17575-99 —
21 Rocker Housing, chrome (2) See chart for complete Rocker Box Kit 17573-99 —
Rocker Housing, polished (2) See chart for complete Rocker Box Kit 17574-99 —
22 Lifter Cover, Front, polished See chart for completeTappet Cover Set 17576-99 —
Lifter Cover, Rear, polished See chart for completeTappet Cover Set 17577-99 —
Lifter Cover, Front, chrome See chart for complete Tappet Cover Set 17964-99 —
Lifter Cover, Rear, chrome See chart for complete Tappet Cover Set 17966-99 —
23 Gasket,Breather Cover,Stock Pattern,Paper,1999-2010 bt (2) Also available in the Gasket Kit, see chart 17591-99, 17162-03,
17592-99 90-4077
24 Gasket,Breather Bae,Stock Pattern,Paper,1999-2010 bt (2) Also available in the Gasket Kit, see chart 17162-03, 17592-99 90-4078
25 Support, rocker arm (2) See chart for complete Rocker Box Kit 17594-99 —
26 Cover, breather (2) 2007-'10 bt 17595-99 —
27 Bae, breather (2) 2007-'10 bt 17596-99 —
28 Shaft,Rocker Arm,1984-up bt (4) 17611-83B 90-4006
29 Pushrod, exhaust - 10.536" long (black oxide nish) (2) See chart for complete Pushrod Set 17922-99 —
Pushrod, intake - 10.418" long (plain nish) (2) See chart for complete Pushrod Set 17923-99 —
30 Cover, pushrod - lower (4) See chart for complete Pushrod Cover Kit 17939-99 —
31 Cap,Pushrod Cover,1936-up bt, 1957-'90 xl (4) 17945-36B 93-4017
32 Spring,Pushrod Cover Cap,.080" Wire,.730" x .890" x .925",Steel,1936-up bt, 1957-'90 xl (4) 17947-36 93-4018
33 Cover, pushrod - upper (4) See chart for complete Pushrod Cover Kit 17948-99 —
34 Retainer, spring cap (4) 17968-99 —
35 Pin,Dowel,.250" x 1.750",Alloy (2) each 18535-99 50-8195-S
Pin,Dowel,1999-up bt,2 Pack 2 Pack 50-8195
36 Tappet,Set,Hydraulic,1999-up bt, 2000-up xl (4) S&S P/N is for a set of four tappets 18538-99A, 18538-99B,
18538-99C 33-5350
37 Gasket,Tappet Cover,1999-up bt (2) each 18635-99B 33-5303-S
Gasket,Tappet Cover, 1999-up bt (2) 2 Pack 33-5303-2
38 Seal, UmbrellaValve Cover, 1999-2013 bt (2) 26858-99 900-0495
39 Filter, Breather, Stock Rocker Box (2) 63815-99 900-0496
40 Bolt, 2011-up bt 4400 —
41 Breather Assembly, 2011-up bt 17025-03A —
42 Breather, Bae Assembly, w/BreatherValve & Filter 26500002 —

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Harley-Davidson®Twin Cam 96™& 103™Models
7
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Not Direct Service PartS (SolD aS aSSembilieS) Note: These products are compatible services as assemblies.
# Description VVT Part No.
10, 11, 13 O-ring,Kit,Pushrod Cover,1984-'99 bt, 1986-2003 xl 93-4022
12, 14, 18, 23, 24 Gasket, Kit, Rocker Cover, 1999-2010 bt (includes gaskets for 2 rocker covers) 900-0534
20, 21, 25 Rocker Box, Kit, Chrome, Die Cast, 1999-up bt 90-4110
22 Tappet Cover, Set, Stock Style, 1999-up bt, Polished Billet, includes gaskets and hardware 33-5601
Tappet Cover, Set, Stock Style, 1999-up bt, Chrome Billet, includes gaskets and hardware 106-3883
29 Pushrod Set, Non-Adjustable, Steel,1999-up BT 930-0046
Pushrod, Set, Stock, Steel, 1999-2015 bt, Standard Adjustable* (*requires Pushrod Covers #106-1340 and retaining clips #93-4100) 93-5096
Pushrod, Set, Stock, Steel, 1999-2015 bt, Quickee Adjustable* (*requires Pushrod Covers #106-1340 and retaining clips #93-4100) 93-5122
Pushrod, Set, Stock, Steel, 1999-2015 bt, Timesaver Adjustable 930-0053
30, 33, 40 Pushrod Cover, Kit, Chrome, 1999-2015 bt* (*requires Cover Keeper Set #93-4100 to complete installation) 106-1340
34 Cover Keeper, Set, Pushrod, 2.500", Chrome (Set of 4) NOTE: stock length is 1.750" 93-4100
24
39
27
38
23
26
S&S Pushrod Cover Kit
40
5
29
14
21
25
8
8
1
18
40
42
41
20
4
28
13
33
34
31
32 2
17
4
6
3
10
30
11
22
35
37
36
7
16
19
19
9
12
2011-up

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Order tOll free 866-244-2673
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
8
piston anD FlywHeel assembly
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 Retaining Ring,External,Pinion Bearing,1.160" x 1.480" x .046",Carbon Steel,SAE 1060-1090 each 11177A 50-8057
Retaining Ring, External, Pinion Bearing, 1.160" x 1.480" x .046", Carbon Steel, SAE 1060-1090 5 Pack 50-1004
2 Piston Ring Set, standard (2) forTwin Cam 96™ models 21949-07,
21936-99 9400022
Piston Ring Set, standard (2) forTwin Cam 103™ models 21918-99 940-0023
Piston Ring Set, 0.005" O.S. (2) for Twin Cam 96™ models 21950-07 —
Piston Ring Set, 0.005" O.S. (2) for Twin Cam 103™ models 21919-99 —
Piston Ring Set, 0.010" O.S. (2) for Twin Cam 96™ models 21955-07 —
Piston Ring Set, 0.010" O.S. (2) for Twin Cam 103™ models 21945-99 —
3 Piston & Rings Assembly, w/piston pin & lock rings - std. (2) 3.750" bore,Twin Cam 96™ models 21959-07 —
Piston & Rings Assembly, w/piston pin & lock rings - std. (2) 3.875" bore,Twin Cam 103™ models See chart for piston options 21962-07 —
Piston & Rings Assembly w/piston pin & lock rings - 0.005" O.S. (2) 3.750" bore, Twin Cam 96™ models 21960-07 —
Piston & Rings Assembly w/piston pin & lock rings - 0.005" O.S. (2) 3.875" bore, Twin Cam 103™ models
See chart for piston options 21963-07 —
Piston & Rings Assembly w/piston pin & lock rings - 0.010" O.S. (2) 3.750" bore, Twin Cam 96™ models 21961-07 —
Piston & Rings Assembly w/piston pin & lock rings - 0.010" O.S. (2) 3.875" bore, Twin Cam 103™ models
See chart for piston options 21964-07 —
4 Wristpin Keeper,C-Clip,.927",Spring Wire Steel (4) each
22097-99
94-9278-S
Wristpin Keeper, C-Clip, .927", Spring Wire Steel (4) 2 Pack 94-9278-2
Wristpin Keeper,C-Clip,.927",Spring Wire Steel,4 Pack 106-2304
5 Piston Pin (2) 22131-05 —
6Flywheel,Assembly,4-3/8" Stroke,8-1/4" Diameter,W/Tapered WP Ends,Balanced,2007-up bt
See chart for complete Flywheel Assembly 23729-07A —
Flywheel, Assembly, 4" Stroke, 8-1/4" Diameter,Balanced, 2006 Dyna, 2007-up bt See chart for complete Flywheel Assembly 23955-06 —
Flywheel,Assembly,4-3/8" Stroke,8-1/4" Diameter,W/Tapered WP Ends,Balanced,2007-up bt w/ Balancer Softail models
See chart for complete Flywheel Assembly 23912-07A —
Not Direct Service PartS (SolD aS aSSembilieS) Note: These products are compatible services as assemblies.
# Description VVT Part No.
2Ring, Set, Piston, 3-7/8", Wiseco, Standard, 1999-up bt, 1 Pack 940-0024
Ring, Set, Piston, 3-7/8", Wiseco, +.010", 1999-up bt, 1 Pack 940-0026
3Piston, Set, 3-7/8", Standard, -2cc Dome, w/ Wristpin & Keepers,Wiseco, .927"WP, 9:1 Compression, 2007-'14 bt 920-0098
Piston, Set, 3-7/8", +.010", -2cc Dome, w/ Wristpin & Keepers,Wiseco, .927" WP, 9:1 Compression, 2007-'14 bt 920-0099
6Flywheel, Assembly, 4-3/8" Stroke, SF3,TaperedWristpin, 7.659" Rod, w/ Sprocket BearingRace, 1035TPW, 2007-up bt Bt 320-0352
Flywheel, Assembly, 4" Stroke, SF3, Full WidthWristpin, 7.659" Rod, w/ Sprocket BearingRace, 1230 tpw, 2007-up bt 320-0392
Flywheel, Assembly, 4-3/8" Stroke, SF3,TaperedWristpin, 7.659" Rod, w/ Sprocket BearingRace, 1035 tpw, 2007-up bt Bt (B Style), Softail Models 320-0358

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D® part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Harley-Davidson®Twin Cam 96™& 103™Models
9
Parts for
Knuckleheads
SOFTAIL MODELS INTERNAL BALANCER
1
1
3
3
4
4
5
5
2
2
4
6
6
4
TOURING AND DYNA MODELS

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Order tOll free 866-244-2673
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
10
all CranKCases & engine oil Filter
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 Plug,Pipe,3/4 Taper,1/4-18 NPTF x .460",Zinc,Stee 765 50-8330
2 Screw, 5/16-18 x 3.0 hex ange hd. (Grade 5) (9) 895 310-0645
3 Washer, 1-1/4 x 1-53/64 x 1/8 8972 —
4 Bearing,Inner,Needle,Cam,1.0" x 1.25" x .50" each 9215 31-4199-S
Bearing,Assembly,Inner,Needle,Cam,2006-up bt,2 Pack 31-4499
5 O-ring,(-014),.500" ID x .625" OD,Nitrile,10 Pack 11140, 11273 50-8130
6 O-ring,(-013),.437" ID x .565" OD,Vitoneach 11105, 11273 50-8008
O-ring,Oil Return,(-013),.437" ID x .565" OD,Viton,10 Pack 50-8078
7 Seal,Left,Main Bearing,1999-up bt 12068 31-4035
8 Pin,Dowel,.557" x .500",Black,Steel (2) each 16574-99A, 16573-83,
16573-83A
50-8023
Pin,Dowel,.557" x .500",Black,Steel (2) 10 Pack 50-8109
9 Pin,Dowel,.275" x .397",Steel (2) 16589-99A 50-8148-S
10 Pin,Dowel,.437" x .610",Steel (4) 16595-99A 50-8177
11 Jet,Assembly,Piston Cooling,1999-up bt (2) NOTE:The S&S Piston Oiler is billet aluminum 22371-99, 22307-99 31-2025B
12 Spacer, Sprocket Shaft 1999-'02 24008-99 —
Spacer, Sprocket Shaft 2003-up 24008-03 —
13 Set of Crankcases,TCA 2006-up, (silver) See chart for crankcase options 24654-06B —
Set of Crankcases,TCA 2006-up, (black) See chart for crankcase options 24621-06B —
14 Bearing,Right,Main,1999-'06 bt,2000-up Bal bt,2003-up NB bt (2) 24604-00D 31-4085
Bearing, Main, for 2007 - '15 bt (2) 24605-07 310-0593
15 Fitting, Straight (3) 26314-99 —
16 Fitting,Straight,3/4-16 UNF 2A x 1",Steel 26352-95A 50-8197-S
17 O-ring,(-015),.562" ID x .068" OD,Black,Viton (2) 26432-76A 50-8034-S
18 Retaining Ring,Internal,2.731" x .031" x .158",Steel,SAE 1070-1090(2) 35114-02 50-8160-S
19 Filter, Oil, T-Series X-Wedge, Chrome, 12 Pack 63798-99A 31-4104
Filter, Oil,T-Series X-Wedge, Chrome, 12 Pack 310-0242
Filter, Oil, T-Series X-Wedge, Chrome, 12 Pack 63731-99A 31-4103
Filter, Oil,T-Series X-Wedge, Chrome, 12 Pack 310-0241
20 Screw,Torx Panhead,8-32 x 3/8",Zinc,Steel(4) 68042-99 50-0054-S
21 Jet,Kit,Piston Cooling,4-1/8" 1984-'99 bt, 1999-up bt 2 Pack NOTE: The S&S Piston Oiler is billet aluminum 22307-99, 31-2026
–Bearing Kit, w/# 3, 14, 18 & inner race (Not Shown) 24004-03A 3100589
Not Direct Service PartS (SolD aS aSSembilieS) Note: These products are compatible services as assemblies.
# Description VVT Part No.
13 Crankcase Assembly, Stock Bore, Black 2007-UpTouring 310-0367
13 Crankcase Assembly, Stock Bore, Silver, 07-Up Touring 310-0366
Oil Line Kit (Required) 310-0435
Trans Drilling Fixture (Recommended) 530-0006

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D® part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Harley-Davidson®Twin Cam 96™& 103™Models
11
12
2
14 18
18
17 8
4
9
1
20
13
15
11
5
16
19
7
3
10 6
21

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Order tOll free 866-244-2673
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
12
CamsHaFts anD Cam Cover
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 Roll Pin 601 —
2 Screw, primary chain tensioner (2) 927A —
3 Screw, 1/4-20 x 1-1/4 knurled hd (Grade 8) (10) 4740A 50-0257-S
4Screw, SHCS, w/Flat Washer, 1/4-20 x 1", Zinc, ASTM A574-92A 4 Pack 4741A 50-0092-S
Screw, SHCS, w/Flat Washer, 1/4-20 x 1", Zinc, ASTM A574-92A 4 Pack 50-0092P
5 Washer, 13/32 x 1-1/8 x 7/32 6294 500-0313
6 Bearing, Inner, Needle, Cam, 1.0" x 1.25" x .50" (2) each 9215 31-4199-S
Bearing, Inner, Needle, Cam, 1.0" x 1.25" x .50" (2) 2 Pack 31-4499
7 O-ring, (-209), .687" ID x .937" OD,Viton each 11293, 11157, 11101, 11190 50-8039
8 O-ring, (-110), .375" ID x .562" OD,Viton each 11301 50-8066-S
9 Retaining Ring, External,Tru-arc, .722" x .042", Steel, SAE 1060-1090 11461, 11494 50-8061
–Gasket Kit, cam service (Not Shown) 17045-99C —
11 Screw, HHC, Flanged, Gr8, 5/16-18 x 3/4", Black, Steel (2) 25566-06 50-0100
12 Bushing, crankshaft, 2006 Dyna models 25241-99 —
Bushing, crankshaft, 2007-2009 big twins 25344-99 —
13 Gasket, Gearcover, Black, Paper, 1999-up bt each 25244-99A 31-2032-S
14 Cam Support Plate w/bypass valve 25355-06 —
15 Cam Cover, (black) See chart for complete Cam Cover assembly 25364-01A —
Cam Cover, (silver) See chart for complete Cam Cover assembly 25367-01A —
Cam Cover, (chrome) See chart for complete Cam Cover assembly 25369-01A —
– Camshaft Chain & Fastener Kit (Not Shown) 25585-06 —
17 Camshaft Kit 25595-06 330-0293
18 Sprocket Kit, Cam Drive On Crankshaft - 17-Tooth 25355-06, 25673-06 310-0608
19 Chain, Primary Cam Drive 25364-01A, 25675-06 310-0609
20 Chain, Secondary Cam Drive 25367-01A, 25683-06 310-0610
21 Sprocket, Cam Drive - 34Tooth 25369-01A, 25728-06 310-0611
22 Spacer, Cam Drive Sprocket Alignment 0.100"Thick (Use As Required) 25729-06 —
23 Spacer, Cam Drive Sprocket Alignment 0.110"Thick (Use As Required) 25731-06 —
Spacer, Cam Drive Sprocket Alignment 0.120" Thick (Use As Required) 25734-06 —
Spacer, Cam Drive Sprocket Alignment 0.130" Thick (Use As Required) 25736-06 —
Spacer, Cam Drive Sprocket Alignment 0.140" Thick (Use As Required) 25737-06 —
Spacer, Cam Drive Sprocket Alignment 0.150" Thick (Use As Required) 25738-06 —
24 Oil Pump Assembly, w/Body, Both Gerotor Assemblies, & Separator Plate All Models 26037-06 —
25 Spring, ReliefValve All Models 26210-99 —
26 Valve, Pressure Relief, Oil Pump 26400-82, 26400-82B 31-6082
27 Cover, Timer Cover 32543-99 —
Cover, Timer Cover (Black) 32558-99 —
28 Screw,Torx Panhead, 8-32 x 3/8", Zinc, Steel (5) 68042-99 50-0054-S
29 Ball, Check Valve, .375", Stainless Steel (12) each 8866, 8873 50-8091
30 Chain Tensioner Assembly, Primary Cam Drive Chain 39968-06 330-0283
31 Chain Tensioner Assembly, Secondary Cam Drive Chain 39969-06 330-0284
Not Direct Service PartS (SolD aS aSSembilieS) Note: These products are compatible services as assemblies.
# Description VVT Part No.
15 Cover, Cam Chest, Billet 6061, 1999-up bt, Polished (Hardware and gasket included) 31-6516
Cover, Cam Chest, Billet 6061, 1999-up bt, Chrome (Hardware and gasket included) 106-3774

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D® part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Harley-Davidson®Twin Cam 96™& 103™Models
13
6
8
7
24
17
3
3
28
27
15
13
4
4
29
1
31
32
12
18
11
11
21
25
26
9
5
5
30 2
19
17
20
14

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Order tOll free 866-244-2673
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
14
inDuCtion moDule anD air Filter
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 Screw,SHCS,5/16-18 x 3/4",Zinc,ASTM A574-92A (4) each 3275 50-0302-S
2 Seal, Manifold Air Pressure Sensor 11291 —
3 Flange, Mounting (2) 26993-06 —
4 Seal,Intake,Stock Heads,1984-up bt, 1986-up xl (2) 26992-99, 26995-86A,
26995-86B 16-0236
5 Intake AirTemperature Sensor Kit, w/Screws 27381-06 310-0600
6 Injector, Fuel (2) 27625-06 —
Fuel Injector Assembly (2) 27709-06A —
–Fuel Rail Service Kit, w/Fuel Rail, Screws, Washers, O-Rings, &Tube (Not Shown) 27651-06 —
– Induction Module Service Kit, Sensor O-Rings & Screws, Injector Clips, Fuel Tube Seal Retainer, & O-Rings (Not Shown) 27655-06 —
9 IAC Motor, w/2 screws 27658-06 550-0406
10 Throttle Position Sensor, w/screws 27659-06 550-0407
11 Bracket, cable 27684-06 —
12 Sensor, MAP, IST with Seal 32424-98, 32416-10,
32417-10 55-5057
13 MAP Sensor, w/o Seal 32424-98 —
14 Intake AirTemperature Harness 69607-06 —
15 Housing, 2-place female 72062-06 —
16 Terminal, #18 AWG female socket (2) 72094-06 —
17 Wire Seal, #18-20 AWG (yellow) (2) 72096-06 —
18 Housing, 2 place pin (black) 74102-98BK —
19 Secondary Lock, 2-place pin 74142-98 —
20 Terminal, #16-20 AWG pin (2) 74190-98 —
21 Cap Plug (California Only) 90383-98 —
– Gasket, Induction Module To Backplate (Not Shown) 29583-01A —
– O-Ring (2) (Not Shown) 11292 —
– Backplate Assembly (Not Shown) 29581-01B —
25 Screw, Breather (2) 29465-99 —
26 Breather Tube (2) 29476-99 —
27 Gasket, Filter Element 29313-95 —
28 Filter,Air,Carb/EFI,2001-'08 Softail EFI,2002-'07 29461-99 106-4630
# Description H-D Part No. VVT Part No.
29 Screw,SHCS,5/16-18 x 3/4",Zinc,ASTM A574-92A (4) each 3275 50-0302-S
30 Screw, 1/4-20 x 11/16 SEMS socket hd., w/lockpatch (2) 4705 —
31 Flange, Mounting (2) 26993-06 —
32 Seal,Intake,Stock Heads,1984-up bt, 1986-up xl (2) 26992-99, 26995-86A,
26995-86B 16-0236
33 Fuel Injector Assembly, w/O-Ring (2) 27609-04, 27609-01,
27609-01A, 27609-01B 550-0409
34 Induction Module Service Kit 27711-08 —
35 Bracket, Induction Module 27712-08 —
– Fuel Rail (Not Shown) 27721-08 —
37 Sensor, Temperature Manifold Absolute Pressure w/O-Ring 32319-07 —
38 Fuel Line 62905-08 —
39 Cap, Purge Tube 90383-98 —
40 Gasket,Throttle Body,Throttle by Wire,2008-UpTouring,2009-upTri-Glide, 2011-up Softail CVO each 29645-08 106-2643
– Backplate Assembly (Not Shown) 29630-08A —
42 Breather Bolt (2) 29465-08 —
43 Breather Tube (2) 29502-08 —
44 Filter Element, W/29645-08 29633-08 —
2007-2008 big twin and 2006 Dyna models
2008-2015 Touring

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D® part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Harley-Davidson®Twin Cam 96™& 103™Models
15
2007-'08 big twin and 2006 Dyna models
15
16
17
5
10
911
6
1
34
6
21
18
19
20 12
13
14
25
26
27
28
37
39
34
44
30
32
31
29
43
34
38
33 33
35
42
40
2008-2012 Touring models
2

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads
Parts for
Knuckleheads Parts for
Panheads
Parts for
Flatheads
Index
Cross Reference Parts for
Evolution®
1984-1999
Order tOll free 866-244-2673
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
QUALITY SERVICE PARTS
V-TWIN ®
16
eleCtroniC Control moDule (eCm) anD Coil
For 2007-2015 Harley-DaviDson big twins anD 2006 Dyna
# Description H-D Part No. VVT Part No.
1 Screw, 1/4-20 x 1-1/4 knurled hd. (Grade 8) (4) 3601 —
– Screw, No. 10-32 x 1/2 self tapping (Not Shown) 3602A —
3 Screw, 1/4-20 x 2-1/4 knurled socket hd. (w/lockpatch) (2) 4717A 50-0078
4 Washer, 1/4 x 7/16 x 1/16 (4) 6099 —
Washer, No. 10 x 1/2 x 3/64 (4) 6716 —
5 Nut, No. 10-32 x 3/8 keps (4) 7629 —
– Cable Strap, With Plug-In Retainer (4) (Not Shown) 10177 —
– Coil Cover Assembly, with Pad (chrome) (Not Shown) 30202-01 —
– Pad, Coil Cover (Not Shown) 31742-00 —
9 Ignition Coil, Dual, 2007-'14 EFI 31696-07A 550-0424
– Coil Cover Assembly, with Pad (Chrome) (Not Shown) 31772-01 —
Coil Cover Assembly, with Pad (BlackWrinkle) (Not Shown) 31773-01 —
11 Spark Plug Cable, Front Cylinder See chart for spark plug wire options 31981-99B —
12 Spark Plug Cable, Rear Cylinder See chart for spark plug wire options 31983-00B —
13 Spark Plug, 6R12 (2) Champion Spark Plug RA8HC each 32317-86A,
32362-04
55-1320
Spark Plug, 6R12 (2) Champion Spark Plug RA8HC 2 Pack 55-1322
Spark Plug (2) Champion Spark Plug RA8HC each 32317-86A,
32362-04
55-1320
Spark Plug (2) Champion Spark Plug RA8HC 2 Pack 55-1322
14 Electronic Control Module w/Calibration See chart for completeVFI Module Kit 32612-01 —
Electronic Control Module w/Calibration See chart for completeVFI Module Kit 32762-01 —
Electronic Control Module, FLT/STBase Level - DOM/HDI See chart for complete VFI Module Kit 32534-05 —
Electronic Control Module, 2006 Dyna Base Level See chart for completeVFI Module Kit 32534-05A —
Electronic Control Module (ECM), Base Level (Domestic, All HDI) Requires Digital Programming See chart for completeVFI Module Kit 32534-05B —
Electronic Control Module, Delphi 2001 - 2012 bt except 2008 Touring, requires digital programming 32498-06 —
Electronic Control Module, Delphi 2001 - 2012 bt except 2008 Touring, requires digital programming 32534-11 —
Electronic Control Module - Fuel Injected
Not Direct Service PartS (SolD aS aSSembilieS) Note: These products are compatible services as assemblies.
# Description VVT Part No.
11 Wire Set, Spark Plug, 99-12 FXD w/EFI 550-0516
Wire Set, Spark Plug, 99-08 Touring w/EFI 550-0517
12 Wire Set, Spark Plug, 00-12 Softail w/EFI 550-0518
Wire Set, Spark Plug,09-12 Touring w/EFI 550-0520
14 Module,Kit,VFI,Delphi,Pro Tune II Software,2001-up bt except 2008-upTouring with S&S Calibration Software 55-5090

Parts for
Sportster®
1986-2015
Parts for
Sportster®
1955-1985
Parts for
Shovelheads Parts for
Knuckleheads
Parts for
Panheads Parts for
Flatheads Index
Cross Reference
Parts for
Evolution®
1984-1999
Visit us at www.ViolaVtwin.com
Parts for
TwinCam 96™/103™
2007-2015
Parts for
TwinCam 88®
1999-2006
Note: VVT parts cross referenced to stock OEM parts are functionally identical, but may dier slightly in appearance. Line drawings are a typical representation and may not be an exact match.
Please conrm the required stock part number for intended application before ordering. All reference to H-D® part numbers are for identication purposes only. We are in no way implying that
any of the VVT products are original equipment parts or that they are equivalent to the corresponding H-D part number shown.
Harley-Davidson®Twin Cam 96™& 103™Models
17
13
5
1
4
9
3
12
11
14