Sanipex BAGNO DESIGN BRISTOL BDM-BIS-412 Series User manual

BDM-BIS-412-XX
BRISTOL CONCEALED SHOWER MIXER WITH 2 WAY DIVERTER
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
           
 



     








 









1 2
1 - Referring to the dimension shown in
picture, embed the body into the wall,
checking the alignment. Make the
connections looking the scheme and
check that there are no leaks.
IMPORTANT: leave the plastic
protection mounted until the tiles are
applied, which must be suitably cut in
order to follow the measure of the
protection.
2 - Remove the protections
3 - Insert the plate
4 - Insert the handles according to the
drawing: press the cross handle and lock
the mixer handle with the grub screw.

3 4
BATH-TUB
COLD
SHOWER
HOT
G1/2"
G1/2"
G1/2" G1/2"
G1/2"
G1/2"

Note:

Note:

INM-BIS-412-XX-06-22
www.sanipexgroup.com