American Standard PORTSMOUTH 4285.551 User manual

PORTSMOUTH™
Certified to comply with ASME A112.18.1M
Installation
Instructions
4285.551
DUAL CONTROL HIGH-ARC
KITCHEN FAUCET
1
2
SINK OR
MOUNTING
SURFACE
(HAND TIGHTEN)
6
5
8
2
7
3
4
1
INSTALL FAUCET
INSTALL SPRAY
Place FAUCET (1) in postion on sink or mounting surface.
Assemble and tighten LOCKNUTS (2) from underside of
sink or mounting surface. Hand tighten to secure FAUCET (1).
Place the HOLDER (4) into the appropriate mounting
hole. Assemble the SPRAY HOLDER WING NUT (5)
onto the shank of SPRAY HOLDER (4) from below
and hand tighten.
Feed SPRAY HOSE (6) through HOLDER (4) so
SPRAY (3) sits in HOLDER (4).
From underneath sink, attach COUPLING NUT (7) of
SPRAY HOSE (6) to HOSE SHANK (9). Tighten
COUPLING NUT (7) firmly.
M965459 Rev. 1.1
INSTALL FAUCET and SPRAY
Turn off water at
main supply.
CAUTION
RECOMMENDED TOOLS
Plumbers' Putty or Caulking
Adjustable Wrench
Channel Locks
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.

5
4SERVICE
To change direction of handle rotation, proceed as follows:
Turn valve to OFF position.
Pull out INDEX CAP (1) and remove HANDLE SCREW (2).
Pull off HANDLE (3).
Pull off STEM ADAPTER (4).
Remove SPRING CLIP (6).
Lift STOP WASHER (5), turn 90˚ and replace.
Replace SPRING CLIP (6) and STEM ADAPTER (4).
Reinstall HANDLE ASSEMBLY (1,2 & 3).
If spout drips, operate handles several times from OFF to ON position.
Do not force - handles turn only 90˚.
Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3).
Use adjustable wrench to tighten connections. Do not over
tighten. For BULL-NOSE RISERS (3), be careful not to kink copper
supply when bending. Use of tubing cutter may be required to cut
to proper length.
MAKE WATER SUPPLY CONNECTIONS
2
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
1
2
4
5
3
90˚
6
3TEST INSTALLED FITTING
With HANDLES (1) in OFF position, turn on WATER
SUPPLIES (2) and check all connections for leaks.
Remove AERATOR (3).
Operate both HANDLES (1) to flush water lines thoroughly.
Rotate SPOUT (5) in both directions.
Replace AERATOR (3).
Direct SPRAY (4) into sink and activate. Check hose
connections for leaks.
1
3
2
1
54
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE:
M965459 Rev. 1.1
FERRULE
COUPLING NUT
1
2
1
3
3

4285.551
DUAL CONTROL HIGH-ARC
KITCHEN FAUCET
PORTSMOUTH™
M953040-YYY0A
SPRAY HOLDER
M953668-YYY0A
HANDSPRAY & HOSE
M923057-0070A
PUTTY PLATE
994053-0070A
VALVE
918049-0070A
ADAPTER
918555-0070A
HANDLE SCREW
M909610-YYY0A
INDEX BUTTON
M909430-YYY0A
HANDLE ASSEMBLY
A912621-0070A
O-RING
M910261-0070A
AERATOR
M964401-YYY0A
SPOUT KIT
M953056-0070A
DIVERTER
065800-0070A
ATTACHMENT NUT
SPOUT NUT NOT
INCLUDED IN SPOUT KIT
MODEL NUMBER
For toll-free information and answers to your questions, call:
1-800-442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2013
HOT LINE FOR HELP
M965459 Rev. 1.1
CHROME
STAINLESS STEEL
OIL RUBBED BRONZE
002
075
224
Replace the YYY with
Appropriate finish code
M911231-YYY0A
AERATOR RING