Sanipex BAGNO DESIGN BRISTOL BDM-BIS-410L Series User manual

BDM-BIS-410L-XX
BRISTOL CONCEALED SHOWER MIXER
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
           
 



     








 









2
Assemble the part as per the above.
Ensure that the mains water supply is off before
installation. Install the mixer housing (1) at a depth
so that the finished surface is between the Min/
Max distance markings shown above.
Connect the Hot and Cold water supplies to the
mixer*, then install the mixed water connections*.
Cap off and pressure test to prevent any future
leakage.
Once the surrounding finishes have been applied
(tiles/marble etc.) remove the front covers (2). Fit
the face plate (3) onto the mixer body. Slide the
handle (4) on to the cartridge pin and secure with
the grub screw (5), then push on the cap (6). Open
the water supplies and test.
* Before making any inlet pipe connections, all
supply pipes MUST be thoroughly flushed to
remove debris. Failure to do this could result in
damage to the cart ridge and components or low
flow from the mixer.
1
1
2

3 4
3
4
5
6

Note:

Note:

INM-BIS-410L-XX-06-22
www.sanipexgroup.com