Product Profile
PS2010G PoE switch supports IEEE802.3af/at standard, the maximum transfer distance
up to 100meters, Supply power &data to those devices that support IEEE802.3af/at
standard, so the user does not need to worry that the PoE switch would damage the
non-PoE devices. And also when the PoE powered device disconnected, the PoE switch
will stop providing power. With simple and reliable design, PS2010G can identify the PoE
demand, speed, duplex and use the cable type Auto uplink automatically. PS2010G
mainly used for wireless AP and IP surveillance cameras, it can simplify the wiring of
installation and reduce the cost.
Key features
▪8 10/100/1000Mbps PoE ports, 2 gigabit SFP ports;
▪Support IEEE 802.3af/at standard;
▪Maximum transfer distance is 100meters;
▪Power for wirelessAP and IP surveillance over Cat5 cable;
▪Store-and-forward switching method;
▪LED indicators for each port;
▪Bandwidth:20Gbps;
▪Internal 150W power supply;
▪Support L2 web management;
▪Automatically detects the PoE class level of a Powered Device;
▪Support single output automatic protection function and with self-recovery capacity.
▪Plug & Play;
•Web-based IP address 192.0.2.1 User name: admin, No password