Sanus Systems FM37 User manual

Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA
USA Customer Service 1-800-359-5520 • [email protected] • www.sanus.com
FM37
(6904-100130 <00>)
001480.eps
FPS10 - Full Assembly
Do not use this product for any purpose not explicitly specied by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
CAUTION
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
WARNING
Thank you for choosing the Sanus Systems FM37 flat panel foundation
mount. The Sanus Systems FM37 flat panel foundation mount is designed
to support a flat panel monitor weighing up to 27.3 kg (60 lbs).The
lower shelf supports additional equipment weighing up to 11 kg (25 lbs).
Hardware for multiple mounting configurations is included.
OPT
OPT
Hardware and procedures for multiple mounting congurations are
included. When you see this symbol, choose the correct conguration to
suit your needs. Not all hardware included will be used.

6904-100130 <00>
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged.If any parts are missing or damaged, do not return the item
to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!
[32] x 1
5/32 in.
[03] x 1
001482.eps
FPS10 - Star
[09] x 1
001484.eps
FPS10 - Brackets
[11] x 1
001485.eps
FPS10 - Base and shelf
[12] x 1
[06] x 1
001486.eps
FPS10 - Clamps
[13] x 6
M6 x 35mm
[21] x 4
M4 x 10mm
[02] x 1
001483.eps
[04] x 1
001484.eps
FPS10 - Brackets
[08] x 1
001485.eps
FPS10 - Base and shelf
[07] x 1
001486.eps
FPS10 - Clamps
[05] x 2
001486.eps
FPS10 - Clamps
[10] x 2
[14] x 2
M6 x 20mm
[24] x 1
1/4-20 x 0.75 in.
[15] x 4
M6 1/4-20
[30] x 2
1/4-20 x 0.625 in.
[31] x 2
Plastic Washer
[25] x 4
M4 x 30mm
[26] x 4
M5 x 30mm
[27] x 4
M6 x 35mm
[22] x 4
M5 x 12mm
[23] x 4
M6 x 12mm
[16] x 4
M4
[17] x 4
M5
[18] x 4
M6
[28] x 4
M4 / M5
[29] x 4
M6 / M8
[01] x 1
001481.eps
FPS10 - Pillar
[19] x 4
M4 / M5
[20] x 4
M6 / M8

6904-100130 <00>
1: Install Pillar on Base
001487.eps
FPS10 - Install Pillar to Base
001487.eps
FPS10 - Install Pillar to Base
[01]
[13]
[11]
2: Install Brackets on Pillar
001488.eps
FPS10 - Install Brackets
001488.eps
FPS10 - Install Brackets
001488.eps
FPS10 - Install Brackets
[07]
[06]
[13]
[05] [15]
[14]
[04]
[05]
[15]

6904-100130 <00>
[32]
3: Choose Correct Mounting Plate
200mm x 200mm
75mm x 75mm or 100mm x 100mm
001482.eps
FPS10 - Star
75mm
75mm
[03]
001482.eps
FPS10 - Star
100mm
100mm
[03]
For monitors with 200mm x 200mm hole
spacing, you must remove the existing plate
from the head assembly [03] and replace it
with plate [02].
NOTE
001489.eps
001490.eps
001490.eps
001420.eps
Arrows
[03]
[02]
200mm
200mm
001420.eps
Arrows

6904-100130 <00>
4: Install Head Assembly on Monitor
For Monitors with Flat Back
For Monitors with a Curved Back or an Obstruction
001516.eps
001516.eps
[19], [20]
[16], [17], [18]
[21], [22], [23]
[03]
[19], [20]
[16], [17], [18]
[25], [26], [27]
[03]
[28], [29]

6904-100130 <00>
5: Install Monitor on Pillar
6: Install Shelf
001504.eps
001504.eps
001504.eps
[01]
[24]
[03]
001505.eps
001505.eps
[08]
[30]
[31]
[09]
[32]

6904-100130 <00>
7: Install Wire Channel Covers
001506.eps
CSAV, Inc. and its afliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein
covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to
change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy,
completeness or sufciency of the information contained in this document.
[10]
[10]
[12]