Sanus Systems WMS3 User manual

Sanus Systems 2221 Hwy 36 West, St Paul, MN 55113 USA
USA Customer Service 1-800-359-5520 • www.sanus.com
WMS3
Do not use this product for any purpose not explicitly specified by Sanus Systems.
Improper installation or use may cause personal injury and/or property damage. If
you do not understand these instructions, or if you have doubts about the safety of
the installation, contact Sanus Systems Customer Service. Sanus Systems is not liable
for injury or damage caused by incorrect installation or use.
CAUTION
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
WARNING
Thank you for choosing the Sanus Systems WMS3 wall mount. The Sanus Systems WMS3
wall mount is designed to support speakers weighing up to 3.62 kg (8 lbs.).
OPT
Hardware and procedures for multiple mounting configurations are included.
When you see this symbol, choose the correct configuration to suit your
needs. Not all hardware included will be used.
This product is designed for use in wood stud and concrete block walls only! The
wall must be capable of supporting up to five times the weight of the monitor and
mount combined. If you have any doubts about the ability of the wall to support the
monitor, contact Sanus Systems Customer Service, or a qualified contractor.
CAUTION
6901-100150 <01>

6901-100150 <01>
Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item
to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!
[01] x 4
[04] x 2
[02] x 2
[05] x 8
[09] x 2
8 x 3/4
[03] x 2
[10] x 4
12 x 3/4
[07] x 1
[14] x 2
8-32 x 5/8
[15] x 2
M4 x 8mm
[16] x 4
Plastic Anchor
[11] x 2
1/4-20 x 7/8
[12] x 2
M5 x 25mm
[13] x 4
1/4-20 x 1/2
[06] x 4
[18] x 2
8-32 Keyhole Nut
[17] x 2
M5 x 1/8 spacer
[08] x 4
10 x 3/4
1/8 5/16

6901-100150 <01>
1: Mount the Speaker Plate
Mounting to the Satellite Speaker Adapter
Mounting to the Wall/Speaker Plate
[13]
For speakers with dual threaded inserts or are small wood speakers without inserts.
For speakers with a single threaded insert or keyhole mounting.
[15]
NOTE
Bose
speakers
may require
screw [15].
[08]
[01]
Be careful not to drill all the way through the
cabinet and into components inside. Sanus is not
responsible for any damage caused by drilling
into the speaker.
CAUTION
[04]
[13]
[18]
[17]
[14]

6901-100150 <01>
2: Mount the Wall Plate
Mounting to Concrete Block
[8]
1/8 in.
5/16 in.
[08]
[16]

6901-100150 <01>
3: Install Covers and Arm
OPT
Do not overtighten. continuing to tighten the
Allen set screw once it is snug will not make
the connection stronger.
CAUTION
[05]

6901-100150 <01>
CSAV, Inc. and its afliated corporations and subsidiaries (collectively, “CSAV”), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein
covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to
change without notice or obligation of any kind. CSAV makes no representation of warranty, expressed or implied, regarding the information contained herein. CSAV assumes no responsibility for accuracy,
completeness or sufciency of the information contained in this document.
4: Attach the Speakers
Wall Mount
Ceiling Mount
Do not overtighten. continuing to tighten the
Allen set screw once it is snug will not make
the connection stronger.
CAUTION