Sanyo XACTI VPC-SH1EX User manual

Dual Camera
VPC-SH1EX
VPC-SH1
VPC-SH1GX
VPC-SH1PX
VPC-SH1TA
QUICK GUIDE
Printed in Vietnam
1AG6P1P5616-- SG412EX, U, GX, PX, TA (1209AB-SD)
STEP 1
RECORD A VIDEO CLIP
If the image is not captured...
Is there enough power left in the battery? Recharge
the battery pack.
(See “Insert the battery pack” on the reverse side.)
Turn on the camera.
Press the [O]
button.
You can capture a still
image while recording
a video clip.
During video clip
recording, press the
[O] button to capture
a still image of the
scene at that instant.
STEP 2
CAPTURE A STILL IMAGE
1
2
Press the REC/PLAY
button.
The last recorded
image is displayed.
Select the image to
play back.
Toggle the SET button
left, right, up or down
to move the orange
frame to the file you
wish to play back.
Press the SET button.
The image you
selected in step
2
is
displayed fullscreen.
If a video clip was
selected, playback
begins.
STEP 3
VIEWING IMAGES
1
2
Turn on the camera.
Press the ON/OFF
button for at least
1 second.
If the screen to set
the date and time
appears, press the
MENU button 2
times to cancel it.
Press the [R]
button to begin
recording a video
clip.
To stop recording,
press the [R]
button again.
1
2
3

STEP 4
DELETING IMAGES
Did your photos turn out the way you hoped?
Even if you make a mistake, it’s easy to delete the pictures you aren’t
satisfied with. Unlike film cameras, with a dual camera you can take
all the photos you want, keep the ones you like and delete the rest.
Display the file that
you want to delete.
Toggle the SET
button up.
The Confirm
Delete Screen
appears.
Select “DELETE”,
and press the SET
button.
The current image
is deleted.
To return to the
Playback Screen,
select “EXIT”, and
press the SET
button.
1
2
COPYING FILES TO A COMPUTER
(WINDOWS XP)
3
Start your computer, and use the supplied USB
interface cable to connect your camera to the
computer.
Connect the camera’s USB/AV terminal to the
computer’s USB connector.
The USB Connection Screen appears on the
camera’s monitor.
Select “COMPUTER”, and press the SET button.
The screen to select the connection mode
appears.
Select “CARD READER”, and press the SET
button.
Select an action.
Select the desired procedure.
Copy the desired camera file(s) to the computer.
1
2
3
CAUTION
To access the data in the camera’s internal memory...
Remove the card from the camera.
A card is not included with your camera. Please
purchase a commercially sold card.
Monitor unit
1Open
Card
3Insert.
Card slot cover
2Pull and rotate.
4
5
4Insert the card until it
clicks into place
After inserting the
card, colse the card slot
cover.
INSTALL THE BATTERY PACK AND CARD
After installing the battery pack, connect the AC
adaptor (supplied) to the camera's DC IN
terminal and charge the battery.
Insert the battery pack
Battery pack
13
4
2
Card slot
Insert the card