Sanyo VCC-HD4600P User manual

Model Name Reference No. Destination
L5DH2/XE,US-Z,C-Z,XE-C1F,XE-C8F,US-C1F,US-C8F,C-C1F (R)
11741000,01,03, 11746000,10,01,11,03 Reference No. SM5310801-02
VCC-HD4600P SM5310801 Europe, U.K., Southeast Asia
VCC-HD4600 SM5310801 U.S.A., Canada, Brazil, Taiwan
VCC-HD4600PC SM5310801 China
Notice
PRODUCTION CHANGECORRECTION ADD INFORMATIONSERVICE FLASH FILE No.
Please add this notice to the Service manual listed below.
Category : Megapixel Camera
SANYO Electric Co., Ltd.
Osaka,Japan
Date : Jul. 2010
The reason of change.
A : Misprint B : Quality Reliability C : Standardization D : Design
E : Deletion F : Addition G : Multiple Use
FOR RoHS
REASON: D (Design)
RoHS
This product does not contain any hazardous substances prohibited by the RoHS Directive.
WARNING
You are requested to use RoHS compliant parts for maintenance or repair.
You are requested to use lead-free solder.
The CA-9 circuit board which has been installed to the CA-2 circuit board since the commencement of production
has had its functions transferred to other circuit boards, and the CA-9 circuit board has been abolished.
Because the CA-9 circuit board has been abolished, the CA-2 circuit board and the CA-5 circuit board have been
changed.
The circuit boards manufactured before the changes and the ones manufactured after the changes are not
interchangeable.
This notice is included with circuit boards which have been manufactured after the change.
VCC-HD4600P : Please refer to this Notice for the set since Serial number 49370479 or later .
VCC-HD4600 : Please refer to this Notice for the set since Serial number 49370401 or later .
VCC-HD4600PC : Please refer to this Notice for the set since Serial number 51350001 or later .
Please refer to Service Manual ( SM5310801 ) for other sets.
CONTENTS
SPECIFICATIONS .............................................3
1. DISASSEMBLY ..............................................5
2. ADJUSTMENT ...............................................9
3. PARTS LIST ................................................16
CIRCUIT DIAGRAMS &
PRINTED WIRING BOARDS ...........................C1

-2 -
WARNING
Do not use solder containing lead.
This product has been manufactured using lead-free
solder in order to help preserve the environment.
Because of this, be sure to use lead-free solder when
carrying out repair work, and never use solder
containing lead.
Lead-free solder has a melting point that is 30 - 40°C (86 -
104°F) higher than solder containing lead, and moreover it
does not contain lead which attaches easily to other metals.
As a result, it does not melt as easily as solder containing
lead, and soldering will be more difficult even if the
temperature of the soldering iron is increased.
The extra difficulty in soldering means that soldering time
will increase and damage to the components or the circuit
board may easily occur.
Because of this, you should use a soldering iron and
solder that satisfy the following conditions when carrying out
repair work.
Soldering iron
Use a soldering iron which is 70 W or equivalent, and
which lets you adjust the tip temperature up to 450°C
(842°F). It should also have as good temperature recovery
characteristics as possible.
Set the temperature to 350°C (662°F) or less for chip
components, to 380°C (716°F) for lead wires and similar,
and to 420°C (788°F) when installing and removing shield
plates.
The tip of the soldering iron should have a C-cut shape or
a driver shape so that it can contact the circuit board as flat
or in a line as much as possible.
Solder
Use solder with the metal content and composition ratio by
weight given in the table below. Do not use solders which
do not meet these conditions.
Lead-free solder is available for purchase as a service tool.
Use the following part number when ordering:
Part name: Lead-free solder with resin (0.5 mm dia., 500 g)
Part number: VJ8-0270
Note:
If replacing existing solder containing lead with lead-free
solder in the soldered parts of products that have been
manufactured up until now, remove all of the existing solder
at those parts before applying the lead-free solder.
Metal content Tin (Sn) Silver (Ag) Copper (Cu)
Composition
ratio by weight 96.5% 3.0% 0.5%
CAUTION
The surface of the camera can be hot during operation,
but it is not a malfunction.
When you touch the heated portion of the camera for a
long time during installation, adjustment or dismounting,
you may get a low-temperature burn.
SD card may be hot immediately after use. When you
remove a SD card from the camera, be absolutely sure to
turn it off and wait until it is completely cooled down.

-3 -
SPECIFICATIONS
Camera
Image pickup device : 1/2.5-inch CMOS sensor
Effective pixels : 16:9 1920 (H) x 1080 (V), 4:3 2288 (H) x 1712 (V)
Lowest image illumination : 50IRE: 2.0 lx (at F1.8, color mode, high gain)
Lowest image illumination : 50IRE: 0.1 lx (at F1.8, black-and-white mode, high gain)
Video S/N ratio : 50 dB (whenAGC is “OFF”)
Lens : Focal length: f=6.3 - 63 mm, F number: F1.8 -2.5
Optical zoom 10x, electronic zoom 16x (up to 160x when used in combination with the optical zoom)
Day/Night function : Auto, color, black-and-white, alarm input switching
Focus : AUTO, MANUAL, ONE PUSH
White balance : Auto (ATW), one push (AWC), manual (R/B gain adjustable),indoor, outdoor, fluorescent
Backlight compensation : Multi-spot evaluative metering, center-weighted evaluative metering, masking, face detection
Electronic sensitivity boosting : Auto (32 x max) or Off
Electronic shutter : 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (VCC-HD4600P, VCC-HD4600PC)
Electronic shutter : 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (VCC-HD4600)
Electronic shutter : Long exposure shutter (1x, 2x, 4x, 8x, 16x, 32x)
Iris : AUTO/MANUAL (electronic iris: ON/OFF)
Digital PTZ : Enables electronic pan, tilt, and zoom operations on clipped subject areas in VGA size,
Zoom magnification: 2x max
Camera settings : Up to 2 patterns of monitoring conditions are configurable
AGC gain : Normal/ Middle/ High (Manual gain setting possible at Off)
Gamma correction : 0.45, 1, Mode 1, Mode 2
Aperture compensation : On/Off (Correction level adjustable)
VIVID COLOR EFFECT : ON/OFF
DNR (digital noise reduction) : ON/OFF
Image inversion : H/V/HV/OFF
Privacy mask : On/Off, max. 8 mask patterns
Motion sensor : On (Motion masking/ motion detection area setting,or analytics)/ Off, face detection
Sway compensation : On/Off
Language selection : English, French, German, Spanish, Japanese
I/O
Video output : HD output: HDMI terminal (TYPE C)
Monitor output for video adjustment: BNC terminal (MONITOR OUT)
LAN : 10BASE-T/ 100BASE-TX (RJ-45 connector)
EX-HDD connector : For external hard disk case connection
SD card slot : 1 (SDHC compliant, max.32GB supported)
Alarm input : 2 (NO/NC), also serving as Day/Night switching function input <control terminals>
Alarm output : 2 (NO/NC switching, 16V, 150 mA, open collector) <control terminals>
Lens remote conntrol : Zoom, Focus, Common (Voltage control: ±(6 to 12V)) <control terminals>
Audio input/ output : Audio input (3.5-mm mini jack) <AUDIO IN>
Audio input/ output : Audio output (3.5-mm mini jack) <AUDIO OUT>
Recording media
SD memory card : Normal recording, Alarm recording, Backup recording in event of a network failure,
Log information recording
External HDD : Normal recording, Alarm recording, Backup recording in event of a network failure, Log information recording

-4 -
Network
Image/ video compression : H.264/ JPEG
Video size (H.264) : (16:9) 1920x1080, 1280x720, 640x360, 320x180
Video size (H.264) : (4:3) 1600x1200, 1280x960, 1024x768, 640x480, 320x240
Video size (JPEG) : (16:9) 1920x1080, 1280x720, 1024x576, 640x360
Video size (JPEG) : (4:3) 2288x1712,1600x1200, 1280x960, 1024x768, 800x600, 640x480, 320x240
Picture quality : QUALITY mode: BASIC, NORMAL, ENHANCED, FINE, SUPER FINE
Picture quality : BITRATE mode: User-specified bit rate
Interface : 10BASE-T/ 100BASE-TX
Protocol : TCP/IP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, DDNS, RTP, RTSP, RTCP
Audio : G.711 (Bidirectional)
Simultaneous access : 20
Security : BASIC authentication (ID/password), SSL, IP filtering
Others
Operating ambient temperature/humidity : Temperature: -10 °C - + 50 °C (14°F - 122°F)
Operating ambient temperature/humidity : Humidity: less than 90 % RH (no condensation)
Power source : 24 V AC ± 10 %, 50/60 Hz/ 12 V -15 V DC/ PoE
Power consumption : 15 W (PoE: 12.3 W)
Weight : 420 g (14.8 oz.)
Dimensions [mm/(inch)] :
1/4 -20UNC
125 (4.90)
115 (4.52)
11
(0.44)
64 (2.53)
Unit: mm (inch)
63 (2.47)

-5 -
27
2
3
4
A
B
6
A
B
8
A
B
5
A
B
69
7
10
11
15
13
14
17
16
12
21
20
19
18
22
24
23
24
26
25
29
28
1
1. DISASSEMBLY
1-1. REMOVAL OF CABINET AND COVER
1. Connector (Power)
2. Cover, SD
3. Two screws 3 x 8
When assembling, tighten the screws order. A B
4. Mounting + Cover mounting
5. Two screws 3 x 4
When assembling, tighten the screws order. A B
6. Two screws 2 x 4
When assembling, tighten the screws order. A B
7. Screw 2 x 4
8. Two screws 2 x 4
When assembling, tighten the screws
order. A B
9. Cover top
10. Cover bottom + Stand
11. Screw 2 x 4
12. Cover right
13. Spacer heat PW
14. Spacer heat
15. Heat sink PW
16. Adhesive cover R
17. Screw 2 x 4
18. Cover left
19. Door
20. Cover bat inner
21. Dec button
22. Screw 3 x 10
23. Screw 3 x 6
24. Three screws 2 x 3.5
25. Cabinet, back
26. Cover dust
27. Cabinet, front
28. Dec window
29. Dec lens

-6 -
1. Connector (CN881)
2. Connector (CN271) (From fan)
3. Two screws 2 x 4
4. Connector
5. CA-6 board
6. Connector (CN501)
7. Connector
8. Connector
9. CA-5 board
10. Screw 2 x 4
11. Connector
12. CA-3 board
13. Spacer,Heat transfer
14. Two screws 2.6 x 4
15. CA-8 board
1-3. REMOVAL OF CA-6 BOARD, CA-5 BOARD, CA-3 BOARD AND CA-8 BOARD
1-2. REMOVAL OF HOLDER
1. Two heat sinks
2. Spacer heat 4
3. Spacer heat 3
4. Spacer heat 4
5. Spacer heat 3
6. Screw 2 x 4
7. Two screws 2 x 4
When assembling, tighten the
screws order. A B
8. Holder back
9. Three screws 2 x 4
10. Two screws 2 x 4
11. Holder front
12. Spacer,Heat transfer
1
3
2
5
4
6
8
7
A
B
12 9
9
11
10
1
2
43
5
6
8
7
9
10
12
13
14
15
14
11
A

-7 -
1. Connector (CN951)
2. Connector (CN952)
3. Connector (CN141)
4. Two screws 2 x 4
5. Connector (CN104)
6. CA-2 board
7. Spacer,Heat sink RUB
8. Connector (CN105)
9. FFC
10. Screw 2 x 4
11. Screw 2 x 4
1-4. REMOVAL OF CA-2 BOARD AND CA-4 BOARD
12. Heat sink
13. Two screws 2.6 x 12
14. Holder fan
15. Motor fan
16. Screw 2 x 4
17. Two screws 2 x 4
18. Holder lens R
19. Holder lens L
20. Two screws 1.4 x 4
21. CA-4 board
22. Assy FPC CA1
19
1
2
3
4
5
7
8
6
9
10
11 12
13
14
15
16
17
18
20
22
21
A

-8 -
1-5. BOARD LOCATION
CA-2 Board
CA-3 Board
CA-6 Board
CA-4 Board
CA-8 Board
CA-5 Board

-9 -
2. ADJUSTMENT
2-1. Table for Servicing Tools
1. Calibration software
Download the calibration software from the following URL.
http://www.overseas.sanyo.com/dcamera_service/
Place the DscCalDi.exe file, camapi32.dll file and
QrCodeInfo.dll file together into a folder of your choice.
2. Pattern box
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure. It is used after adjusting the
chroma meter (VJ8-0192) adjust color temperature to 3100
± 20 K and luminosity to 900 ± 20 cd/m2. Be careful of han-
dling the lump and its circumference are high temperature
during use and after power off for a while.
2-2. Setup
1. System requirements
Windows 2000 or XP or Vista
IBM® -compatible PC with pentium processor
USB port
2. Video monitor
Connect the video output to a video monitor with an input
impedance of 75 ohms.
2-3. Adjustment Items and Order
1. Timer Quartz Adjustment
2. Lens Adjustment (Infinity)
3. Lens Adjustment (1m)
4. AWB Adjustment
5. CMOS (CCD) White Point Defect Detect Adjustment
6. CMOS (CCD) Black Point And White Point Defect Detect
Adjustment In Lighted
7. Privacy Masking Adjustment
8. Gyro Offset Adjustment
Note: If the lens, CMOS and board and changing the part, it
is necessary to adjust again. Item 1-8 adjustments should be
carried out in sequence.
2-4. Connecting the camera to the computer
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Connect the camera’s USB terminal(CN102 CA-2board)
to the computer’s USB connector.
3. Double-click on the DscCalDi.exe.
4. L5DH2 is selected with Model Code.
5. EX (VCC-HD4600P), US (VCC-HD4600) or C (VCC-
HD4600PC) is selected with Factory Mode.
6. PAL (VCC-HD4600P, VCC-HD4600PC) or NTSC (VCC-
HD4600) is selected with Video Mode.
2-4-1. Computer screen during adjustment
2-4-2. Operation buttons
Firmware
QrCode
AWB
Focus
UV Matrix
R Bright
RGB Offset
Tint
B Bright
Gain
Phase
LCD
Calibration Upload
Initialize
LCD Type H AFC Test
VCOMDC
VCOMPP
Cal Data
Cal Mode
OK
OK
EVF
USB storage
Get
Set
VID Set
PID Set
Serial Set
Rev. Set
Setting
Language
Video Mode
VCO
Factory Code
Backrush pulse :
Set
Get
Model_Code
Ref. No. Name Part code
J-1
J-2
J-3
J-4
J-5
J-6
J-7
VJ8-0190
VJ8-0192
VJ8-0191
VJ8-0260
VJ8-0282
Pattern box
Calibration software
Chroma meter
Spare lump (pattern box)
Collimator
Spare lump (collimator)
Siemens star chart
Number
1
1
1
1
1
1
1
CN102
S6001
RESET
CT351
TP351
S9602
CN604
S9604
S9601
S9605
SET
S9603
CA-5 BOARD SIDE B
CA-2 BOARD SIDE B

-10 -
CA-5 BOARD SIDE B
S6001
RESET
CT351
TP351
S9602
CN604
S9604
S9601
S9605
SET
S9603
2-5. Adjustment
1. Timer Quartz Adjustment
Adjustment location: CT351 (CA-5)
Measuring location: CL351 (CA-5)
Measuring equipment: Frequency counter
Subject: No designation
Preparation:
Turn on the switch and wait for 1 minute.
Temperature: 25 ± 5°C
Adjusting method:
1. It turns on power .
2. Adjust with CT351 to 32769.901 Hz - 32770.032 Hz.
2. LensAdjustment (Infinity)
Adjustment location: QrCode of computer screen, Infinity
Cal. of computer screen
Measuring location: Computer screen
Measuring equipment: Collimator
Preparation:
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjusting method:
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Set the camera so that it becomes center of the screen in
the collimator.(Tele and Wide)
3. Connect the camera’s USB terminal to the computer’s
USB connector.
4. Double-click on the DscCalDi.exe.
5. Click the “QrCode”.
6. QrCode Input Dialog display will be displayed.
7. Deselect Bar code Input.
8. Enter the alphanumeric characters which are underneath
the bar code which is included with the lens.
9. Click the Execute.
10. Click the OK.
11. Select “Infinity Cal.” on the LCD “Test”.
12. Lens infinity adjustment value will appear on the screen.
13. Click the OK.
Note:Bar code and QrCode
3. Lens Adjustment (1m) is carried out after this adjust-
ment.
Camera Collimator
Bar code Input
Save Load Get Execute OK
Status:
QrCode Input Dialog
Bar code Input
Save Load Get Execute OK
Status:
QrCode Input Dialog
B086 A079 B374 B086 A079
B086 A079 B374 B086 A079
NO. 1032A
B086 A079 B374 B086 A079
NO. 1032A
K A 0 7 2 2 2 0 0 0 1 A B 0 8 6 A 0 7 9 B 3 7 4 B 0 8 6 A 0 7 9 0 0
Digit number 1-12 13-16 17-20 21- 24 25-28 29-32 33-34
Read character
Bar code
QrCode

-11 -
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_I_WIDE: ZIW
ZIW: infinity adjustment value of focus at zoom position
wide (-126<=ZIW<=110)
AF_I_MID1: ZIM1
ZIM1: infinity adjustment value of focus at zoom position
middle1 (-138<=ZIM1<=121)
AF_I_MID2: ZIM2
ZIM2: infinity adjustment value of focus at zoom position
middle2 (-132<=ZIM2<=114)
AF_I_MID3: ZIM3
ZIM3: infinity adjustment value of focus at zoom position
middle3 (-128<=ZIM3<=209)
AF_I_MID4: ZIM4
ZIM4: infinity adjustment value of focus at zoom position
middle4 (-165<=ZIM4<=241)
AF_I_MID5: ZIM5
ZIM5: infinity adjustment value of focus at zoom position
middle5 (-232<=ZIM5<=300)
AF_I_MID6: ZIM6
ZIM6: infinity adjustment value of focus at zoom position
middle6 (-280<=ZIM6<=342)
AF_I_TELE: ZIT
ZIT: infinity adjustment value of focus at zoom position
tele (-230<=ZIT<=324)
QR_Z_WIDE: QRZW
QRZW: adjustment value of zoom written on QR code
(-102<=QRZW<=-75)
QR_F_I_WIDE: QRFW
QRFW: adjustment value of focus position wide written on
QR code (-63<=QRFW<=261)
3. Lens Adjustment (1m)
Adjustment location: Focus of computer screen
Measuring location: Computer screen
Measuring equipment: Siemens star chart (A3)
Preparation:
Fluorescent light illumination with no flicker (incandescent
light cannot be used.)
Illumination above the subject should be 700 lux ± 10%.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjusting method:
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Set the siemens star chart 100 ± 1.0 cm from lens surface
so that it becomes center of the screen (zoom wide and
tele). Set the camera and the chart in a straight, and do
not put optical systems (mirror and conversion lens etc.)
3. Connect the camera’s USB terminal to the computer’s
USB connector.
4. Double-click on the DscCalDi.exe.
5. Click the “Focus”, and Click the “Yes”.
6. Lens adjustment value will appear on the screen.
7. Click the OK.
DscCalDi x
OK
Focus Result
AF_TEMP_AD: 445
AF_WIDE: 9
AF_MID1: 11
AF_MID2: 15
AF_MID3: 25
AF_MID4: 26
AF_MID5: 24
AF_MID6: 19
AF_TELE: 17
!
Dsc Calibration x
OK
Infinity calibration :
AF_I_WIDE: 24
AF_I_MID1: 23
AF_I_MID2: 23
AF_I_MID3: 23
AF_I_MID4: 14
AF_I_MID5: 5
AF_I_MID6: -4
AF_I_TELE: -15
QR_Z_WIDE: -86
QR_F_I_WIDE: 131
QR_F_I_TELE: -304
QR_Z_AORI: -86
QR_F_I_AORI: 131
IRIS_GAIN: 94
IRIS_OFFSET: 14
Copy
Camera 200 cm Siemens
star chart
100 ± 1.0 cm

-12 -
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_TEMP_AD: ATAD
ATAD: adjustment value of focus temperature A/D
(0<=ATAD<=1023)
AF_WIDE: ZW
ZW: adjustment value of focus at zoom position wide
(-126<=ZW<=110)
AF_MID1: ZM1
ZM1: adjustment value of focus at zoom position middle1
(-138<=ZM1<=121)
AF_MID2: ZM2
ZM2: adjustment value of focus at zoom position middle2
(-132<=ZM2<=114)
AF_MID3: ZM3
ZM3: adjustment value of focus at zoom position middle3
(-123<=ZM3<=204)
AF_MID4: ZM4
ZM4: adjustment value of focus at zoom position middle4
(-147<=ZM4<=215)
AF_MID5: ZM5
ZM5: adjustment value of focus at zoom position middle5
(-173<=ZM5<=248)
AF_MID6: ZM6
ZM6: adjustment value of focus at zoom position middle6
(-180<=ZM6<=263)
AF_TELE: ZT
ZT: adjustment value of focus at zoom position tele
(-188<=ZT<=274)
4. AWB Adjustment
Adjustment location: AWB of computer screen
Measuring location: Computer screen
Measuring equipment: Pattern box
Preparation:
Adjusting method:
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Set a distance of 0.5-1.0 cm between camera lens and
the pattern box. (Do not enter any light.)
3. Connect the camera’s USB terminal to the computer’s
USB connector.
4. Double-click on the DscCalDi.exe.
5. Click the AWB, and click the Yes.
6. AWB adjustment value will appear on the screen.
7. Click the OK.
Adjustment value determination is effectuated using the
“AGC”, “CHECK”, “CHECK_ND”, “IRIS_GAIN”,
“IRIS_OFFSET”, “MS”, “MS_M”, “MS_C”, “MS_C2”,
“MS_C3”, “IRIS_PWM1”, “IRIS_PWM2”, “IRIS_PWM3” and
“IRIS_PWM4” values. If
AGC= a1
CHECK= wc0, wc1, wc2
CHECK_ND= wnc0, wnc1, wnc2
IRIS_GAIN= g
IRIS_OFFSET= o
MS= ms1, ms2,
MS_M= ms3, ms4,
MS_C= ms5, ms6,
MS_C2= ms7, ms8,
MS_C3= ms9
IRIS_PWM1= s1, s2
IRIS_PWM2= s3, s4
IRIS_PWM3= s5, s6
IRIS_PWM4= s7
the adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
a1<=2610
wc0=128 ± 2, wc1=128 ± 2, wc2<=255
wnc0=128 ± 2, wnc1=128 ± 2, wnc2<=255
0<=g<=255, 0<=o<=255
3100<=ms1<=4500, 600<=ms2<=2000,
2771<=ms3<=4171, 2044<=ms4<=3444,
1592<=ms5<=2992, 1109<=ms6<=2509,
1000<=ms7<=2400, 829<=ms8<=2229,
676<=ms9<=2076
0<=s1<=255, 0<=s2<=255, 0<=s3<=255, 0<=s4<=255,
0<=s5<=255, 0<=s6<=255, 0<=s7<=255
s1>s2>s3>s4>s5>s6>s7
Adjustment values other than the above are irrelevant.
Camera
Pattern box

-13 -
5. CMOS (CCD) White Point Defect Detect Adjustment
Adjustment location: CCD Defect of computer screen
Measuring location: Computer screen
Measuring equipment:
Note:
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjustment method:
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Connect the camera’s USB terminal to the computer’s
USB connector.
3. Double-click on the DscCalDi.exe.
4. Shield light with a lens cap to provide dark condition.
5. Select “CCD Defect” on the LCD “Test”, and click the “Yes”.
6. After the adjustment is completed, OK will display.
7. Click the OK.
6. CMOS (CCD) Black Point And White Point Defect
Detect Adjustment In Lighted
Adjustment location: CCD Black of computer screen
Measuring location: Computer screen
Measuring equipment: Pattern box
Adjusting method:
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Set a distance of 0.5 - 1.0 cm between the pattern box and
the camera.
3. Connect the camera’s USB terminal to the computer’s
USB connector.
4. Double-click on the DscCalDi.exe.
5. Select “CCD Black” on the LCD “Test”, and click the “Yes”.
6. After the adjustment is completed, the number of defect
will appear.
7. Click the OK.
Camera
Pattern box
7. Privacy Masking Adjustment
Adjustment location: Privacy Mode of computer screen
Measuring location: Computer screen
Measuring equipment: Collimator
Adjustment method:
1. Set the camera unit lens 10 ± 5 mm from the collimator.
(Do not enter any light.)
2. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
3. Connect the camera’s USB terminal to the computer’s
USB connector.
4. Double-click on the DscCalDi.exe.
5. Select “Privacy Mode” on the LCD “Test”.
6. Select “Privacy Mode” on the LCD “Privacy mask”.
7. Set the camera so that it becomes center of the screen in
the collimator.(Tele side)
8. “Wide” is click and it is made a wide side.
9. From the center of a privacy masking chart, masking
area is adjusted by "Left" and "Right" so that left and
right may become equal, and the upper and lower sides
may become equal by "Up" and "Down".
10 “Tele” is click and it is made a tele side.
11. Check that there is an even amount of space between
the masking area on the TELE screen and the top,
bottom, left and right edges of the monitor screen.
If there is a large amount of difference in the spaces, re-
adjust.
Camera Collimator

-14 -
8. Gyro Offset Adjustment
Adjustment location: EIS Adj of computer screen
Measuring location: Computer screen,
Measuring equipment:
Note: Do not shake the camera while gyro offset is being
adjusted. There is no gyro gain adjustment.
Adjustment method:
1. Connect the camera’s USB terminal to the computer’s
USB connector.
2. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
3. Double-click on the DscCalDi.exe.
4. Select “EIS Adj” on the LCD “Test”.
5. Gyro offset adjustment value will appear on the screen.
6. Click the OK.
Adjustment value determination is effectuated using the
“Offset” values. If
Offset= H1,V1
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
409<=H1<=614, 409<=V1<=614
Down
Up
Right
Left
Privacy Mode
Privacy mask
Tele
Wide
OK

-15 -
2-6. Overwriting firmware from the calibration
software
Preparation:
PC with overwriting firmware copied to the preferred folder in
the HD.
Data: 3L1xxxxx.BIN (xxxxx: version)
Overwriting method:
1. It turns on power while pushing the
ً
button and the
SET button of the CA-5 board.
2. Connect the camera’s USB terminal to the computer’s
USB connector.
3. Double-click on the DscCalDi.exe.
4. Click the Firmware.
5. Choose the fimware file to use for overwriting, and click
the Yes.
6. Update is starting. The message will appear, and choose
OK.
7. After the update is complete, disconnect the USB cable
and turn the camera’s power off.
Note:
Do not turn off the camera’s power while the firmware is be-
ing updated.

16
3. PARTS LIST (R)
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
ACCESSORIES & PACKING MATERIALS
9110 613 221 0287 INST MANUAL,A6,SUMMARY MANUAL,
English,French,Spanish,German,Japanese,
Chinese (Simplified),EXCEPT VCC-HD4600PC
9110 613 221 0294 INST MANUAL,SUMMARY MANUAL A6,
Chinese (Simplified),VCC-HD4600PC ONLY
9130 613 220 5931 CAUTION SHEET,COMPLIAN A6,
EXCEPT VCC-HD4600PC
9201 645 101 6539 TERMINAL 3P
9801 645 103 4571 DISC,CD-ROM L5DB2 PC SOFT WARE,
INSTRUCTION MANUAL,Chinese (Simplified),
VCC-HD4600PC ONLY
9801 645 103 2881 DISC,CD-ROM L5DH2 PC SOFT WARE,
INSTRUCTION MANUAL,English,French,
Spanish,German,Japanese,Chinese (Simplified),
Italian,EXCEPT VCC-HD4600PC
7001 613 220 6402 CARTON CASE INNER
7002 613 184 1659 CUSHION BAG
7004 613 203 8522 LABEL RECYCLE,VCC-HD4600P ONLY
CABINET & CHASSIS PARTS 1
5001 613 220 9625 CABINET,BACK-L5DH2
5002 613 220 9595 COVER,TOP-L5DH2
5003 613 220 9601 COVER,BOTTOM-L5DH2
5004 613 221 0317 STAND-L5DH2
5006 613 203 9635 MOUNTING
5007 613 221 0539 COVER MOUNTING-L5DB2
5008 613 220 5603 COVER SD-L5DB2
5011 613 221 9235 COVER,DUST-L5DH2,EXCEPT VCC-HD4600P
5101 613 220 9632 DEC,WINDOW-L5DH2
5201 613 220 9618 CABINET,FRONT-L5DH2
5202 613 221 2045 DEC,LENS-L5DH2
6004 613 220 9571 HOLDER,FRONT-L5DH2
6005 613 220 9588 HOLDER,BACK-L5DH2
6006 613 220 9649 COVER,LEFT-L5DH2
6007 613 220 9663 DOOR-L5DH2
6008 636 106 8154 COVER BAT INNER-SG212/J
6009 613 221 0577 DEC,BUTTON-L5DH2
6011 613 221 2052 SPACER,HEAT TRANSFER L5DH
6012 613 220 9656 COVER,RIGHT-L5DH2
6016 613 221 7880 HEAT,SINK PW-L5DH2
6017 613 221 9334 ADHESIVE COVER R-L5DH2
6019 613 221 9914 SPACER,HEAT-L5DH2
6021 613 222 3461 SPACER,HEAT4-L5DH2
6022 613 222 3478 SPACER,HEAT3-L5DH2
6023 613 222 3485 SPACER,HEAT PW-L5DH2
NJ501 411 220 0204 SCR PAN PCS 2X3.5
NJ502 312 051 6000 SPECIAL SCREW-3X4
NJ503 411 097 9409 SCR PAN PCS 2X4
NJ504 411 133 5204 SCR PAN+SW+W 3X8
NJ505 411 097 9409 SCR PAN PCS 2X4
NJ506 411 097 9409 SCR PAN PCS 2X4
NJ507 411 098 1006 SCR S-TPG BIN 3X6
NJ508 411 177 9503 SCR S-TPG PAN PCS 1.7X3
NJ509 411 192 0202 SCR S-TPG PAN 3X10
NJ603 411 030 5406 SCR BIN 2X4
NJ604 411 030 5406 SCR BIN 2X4
NJ606 411 030 5406 SCR BIN 2X4
NJ607 411 030 5406 SCR BIN 2X4
NJ608 411 191 9404 SCR PAN 3X6

17
L5DH2/XE_CAB1
6009 NJ604 6006
NJ506
NJ502
NJ505
5002
NJ506
5008
NJ501 NJ509
5011
NJ607
NJ501
NJ608
6005
6023 6016
6017
NJ603
6012
6019
6021
6021
6022
6022
5004
5003
NJ503
NJ508
NJ507
NJ504
5007
5006
NJ606
5101
5201
NJ606
NJ606
6004
6007
6008
6011
6011
5202
5001

18
LOCATION PARTS NO. DESCRIPTION
CABINET & CHASSIS PARTS 2
6002 613 220 9557 HOLDER,LENS L-L5DH2
6003 613 220 9564 HOLDER,LENS R-L5DH2
6010 613 221 0980 HEAT,SINK-L5DH2
6011 613 221 2052 SPACER,HEAT TRANSFER L5DH
6015 613 221 7873 HOLDER,FAN-L5DH2
6018 613 221 3158 HEAT SINK RUB CA4-L5DB2
8000 613 222 3423 ASSY,FPC CA1 SV-L5DH2
8001 645 101 6843 FLEXIBLE FLAT CABLE
M0001 645 102 1335 MOTOR,FAN DC 0.425W
CA2 613 221 1833 COMPL PWB,CA-2 F/W
CA3 613 220 5733 COMPL PWB,CA-3
CA4 613 220 5740 COMPL PWB,CA-4
CA5 613 221 1857 COMPL PWB,CA-5 F/W MAC
CA6 613 220 6976 COMPL PWB,CA-6
CA8 613 221 8153 COMPL PWB,CA-8
NJ601 411 030 5406 SCR BIN 2X4
NJ602 411 030 5406 SCR BIN 2X4
NJ603 411 030 5406 SCR BIN 2X4
NJ605 411 030 5406 SCR BIN 2X4
NJ609 411 030 5406 SCR BIN 2X4
NJ610 411 219 8402 SCR PAN 2.6X12
NJ611 411 030 5406 SCR BIN 2X4
NJ612 411 192 8307 SCR BIN 2.6X4
NJ810 411 187 6509 SCR S-TPG PAN PCS 1.4X4

19
L5DH2/XE_CAB2
CA3
NJ609
NJ611
NJ603
6010
6011
NJ601
NJ609
NJ601
6003
CA8
CA6
NJ605
CA2
NJ602
8000
CA4
8001 6002
NJ610 M0001
6015
NJ612
CA5
6018
NJ810

20
ELECTRICAL PARTS
Note:
1. Materials of Capacitors and Resistors are abbreviated as follows ;
Resistors Capacitors
MT-FILM Metallized Film Resistor MT-POLYEST Metallized Polyester Capacitor
MT-GLAZE Metallized Glaze Resistor MT-COMPO Metallized Composite Capacitor
OXIDE-MT Oxide Metallized Film Resistor TA-SOLID Tantalum Solid Capacitor
AL-SOLID Aluminum Solid Capacitor
NP-ELECT Non-Polarized Electrolytic Capacitor
OS-SOLID Aluminum Solid Capacitors with Organic
Semiconductive Electrolytic Capacitor
DL-ELECT Double Layered Electrolytic Capacitor
POS-SOLID Polymerized Organic Semiconductor Capacitor
2. Tolerance of Capacitor (10pF over) and Resistor are noted with follow symboles.
F ............1% G ............2% J ............5% K ............10%
M ..........20% N ..........30% Z ..........+80% ~ -20%
3. Capacitors
U : µF P : pF
4. Inductors
UH : µH MH : mH
5. N.S.P. : Not available as service parts.
LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. DESCRIPTION
COMPL PWB,CA-2 F/W
613 221 1833
(SEMICONDUCTORS)
Q1001 305 207 1806 TR EMD22
Q1002 405 218 3902 TR UP0431300
OR 305 167 0406 TR EMD12
OR 305 216 2108 TR RN4984FE
Q1003 305 138 6703 TR DTC144EKA
Q1004 305 172 8800 TR 2SC5658-R
OR 305 172 8909 TR 2SC5658-S
OR 305 186 7707 TR 2SC5609 00
Q1005 305 138 6109 TR DTC143EKA
Q1007 305 157 1406 TR 2SA2018
Q1008 305 092 4104 TR 2SC4081-R
Q1009 406 022 3409 TR UPA1814GR-9JG-E1-A
Q1010 305 138 6703 TR DTC144EKA
Q1011 406 022 3409 TR UPA1814GR-9JG-E1-A
Q1012 305 138 6109 TR DTC143EKA
Q1104 405 218 2707 TR UPA650TT-A
Q1105 305 092 4104 TR 2SC4081-R
Q3004 305 186 7301 TR UP04213 00
OR 305 181 1205 TR NSBC144EDXV6T5
OR 305 173 4009 TR PEMH2
OR 305 166 9509 TR EMH2
Q3005 305 138 6703 TR DTC144EKA
Q3006 405 220 8308 TR MCH6428-E
Q5201 305 184 6009 TR UP03396
(INTEGRATED CIRCUITS)
IC101 409 696 4802 IC EV3HB,BGA (N.S.P)
IC102 410 671 3802 IC K4X51323PG-8GC8,BGA (N.S.P)
IC103 410 671 3802 IC K4X51323PG-8GC8,BGA (N.S.P)
IC106 410 695 7008 IC M95128-WMN6P
IC107 409 701 7804 IC AK8128B
OR 409 694 3005 IC AK8128
IC108 409 700 5702 IC FSUSB42MX
IC110 309 526 1400 IC NC7SB3157P6
IC111 309 594 1609 IC SRV05-4TCT
IC112 410 664 0009 IC MIC2015-1.2YML
IC113 309 652 0001 IC BA2903FV
IC121 409 708 4509 IC HD M L5DH2 V1.02-00 J ,BGA (N.S.P)
IC122 309 618 3107 IC MIC2026-2YM
IC201 309 584 2609 IC LA6458M-TE-L-E
IC301 410 619 9804 IC LC87F2832AUFL68TBM-E,BGA (N.S.P)
IC303 409 684 6801 IC XC61GN2502H-
IC521 409 689 2709 IC XC9235A18CE
IC522 409 686 6205 IC SC4624MLT
IC523 409 689 2709 IC XC9235A18CE
IC524 409 689 2709 IC XC9235A18CE
IC525 409 677 2803 IC NJM2877F3-03
IC951 410 676 4507 IC LC898200A-TBM-H,BGA (N.S.P)
IC981 309 577 8304 IC LB1906CL-E
IC982 410 694 5708 IC UPD720114GA-YEU-A
IC984 309 368 5802 IC TC7SH08FU
(DIODES)
D1001 307 232 6009 DIODE SB05-05C-E
D2001 407 270 9700 ZENER DIODE RKZ7.5B2KG
OR 307 210 1101 ZENER DIODE UDZS7.5B
D2002 407 270 9700 ZENER DIODE RKZ7.5B2KG
OR 307 210 1101 ZENER DIODE UDZS7.5B
D2003 407 270 9700 ZENER DIODE RKZ7.5B2KG
OR 307 210 1101 ZENER DIODE UDZS7.5B
D2004 407 270 9700 ZENER DIODE RKZ7.5B2KG
OR 307 210 1101 ZENER DIODE UDZS7.5B
D3001 307 017 2905 LED SEL2110R,
D3003 307 201 7600 LED SML-310MT
(OSCILLATORS)
X1001 945 064 9784 OSC,CRYSTAL 30.000MHZ
X1102 645 094 0170 OSC,CRYSTAL 48.00000MHZ
X3001 945 046 1416 OSC,CERAMIC 4.00MHZ
(INDUCTORS)
L1001 945 053 5476 IMPEDANCE,240 OHM P
L1002 945 048 5757 IMPEDANCE,120 OHM P
L1003 945 066 4718 IMPEDANCE,60 OHM P
L1004 945 066 4718 IMPEDANCE,60 OHM P
L1005 945 061 7417 INDUCTOR,47U M
L1006 645 059 7596 IMPEDANCE,90 OHM P
L1007 645 059 7596 IMPEDANCE,90 OHM P
L1008 945 048 5757 IMPEDANCE,120 OHM P
L1009 945 048 5757 IMPEDANCE,120 OHM P
L1010 945 053 5476 IMPEDANCE,240 OHM P
L2001 645 039 1842 INDUCTOR,2500 OHM
L2002 645 039 1842 INDUCTOR,2500 OHM
L2003 945 048 5757 IMPEDANCE,120 OHM P
L5201 645 084 1231 INDUCTOR,4.7U N
OR 645 098 4594 INDUCTOR,4.7U N
L5202 645 098 4822 INDUCTOR,2.0U M
L5203 645 084 1231 INDUCTOR,4.7U N
OR 645 098 4594 INDUCTOR,4.7U N
L5204 645 084 1231 INDUCTOR,4.7U N
OR 645 098 4594 INDUCTOR,4.7U N
(CAPACITORS)
C1001 303 384 6409 CERAMIC 4.7U K 6.3V
C1002 303 384 6409 CERAMIC 4.7U K 6.3V
C1004 303 276 1307 CERAMIC 1000P K 50V
C1005 303 384 6409 CERAMIC 4.7U K 6.3V
C1006 303 338 0309 CERAMIC 0.1U K 10V
C1007 303 338 0309 CERAMIC 0.1U K 10V
C1008 303 338 0309 CERAMIC 0.1U K 10V
C1010 303 338 0309 CERAMIC 0.1U K 10V
C1012 303 381 8109 CERAMIC 1U K 6.3V
C1013 303 381 8109 CERAMIC 1U K 6.3V
C1014 303 338 0309 CERAMIC 0.1U K 10V
C1016 303 338 0309 CERAMIC 0.1U K 10V
C1017 303 338 0309 CERAMIC 0.1U K 10V
C1020 303 338 0309 CERAMIC 0.1U K 10V
C1021 303 384 6409 CERAMIC 4.7U K 6.3V