Sanyo PLC-XF46N User manual

M ultim e di a L C D P r oj e c to r
P L C - X F 46 N/ E
Ideal for large halls and outdoor events
The industryÕs highest brightness of 12,000 lumens*
* The industry's highest brightness for transmissive LCD projectors, as of May 12, 2006. (According to a Sanyo survey.)

Distributed by:
SML070
http://www.sanyo-lcdp.com/english/
S A NYO E l e c t r i c C o ., L td .
A V C omp a n y
©2006 SANYO Printed in Japan 2006.8. SI.
C a ution : Please consult the instruction manual to ensure safe and proper operation of the product.
Pixelworks ICs are used in this projector
Specifications
O th e r F ea tu r e s
• High-luminance/economy mode selection
• 3D automatic uniformity correction control (AUCC)
• Digital keystone correction
• On Start: Allows quick projection simply by switching the system on
• Power management function automatically turns the power off when no
signals enter
• Retractable carrying bar
• Adjustable leg system with a pop-up handle and shuttle dials
• Many presentation support functions, including freeze and No Show
• Rear and suspended projection capability
• Wireless/wired mouse remote control
• RS-232C self-diagnostic function
O ption s
• D VI bo a r d POA-MD11DVI/ POA-MD18DVI
• 5 B N C bo a r d POA-MD16VD1
• V id e o /Y/ C bo a r d POA-MD03VD2A
• D u a l - S D I bo a r d POA-MD17SDID
• M ini D - S ub 15 bo a r d POA-MD04VGA
• P J N e t O r g a niz e r bo a r d POA-MD13NET2/POA-MD13NET
• W a r p & B l e nding bo a r d POA-MD21WARP*
*Requires upgrade. (Contact the store where the projector was purchased for more information.)
• D VI to M ini D - S ub 15 c a bl e POA-CA-DVIVGA
• M ini D - S ub 15 ex t e n s ion c a bl e KA-MC-DB10*
*Use with included or other commercially available Mini D-Sub 15 cable. Some models require the Mini D-Sub 15
board to allow connection of this cable.
• R e mot e c ont r ol c a bl e POA-CA-RC30
• O ption a l L e n s e s LNS-W01Z/ LNS-W02Z/ LNS-W03/ LNS-W04/ LNS-W06/ LNS-S02Z/
LNS-S03/ LNS-M01/ LNS-T01/ LNS-T02/ LNS-T03
Utilizing four high-output 300-wattUHPlampsasits light source,thePLC-XF46N/E
delivers an amazing 12,000 lumens of brightness. This enables it to provide
ultralarge-screen projection at large conferences and major events.
*The industry's highest brightness for transmissive LCD projectors, as of May 12, 2006. (According to a Sanyo survey.)
With its new high-contrast optical system, the PLC-XF46N/E is able to
achieve an outstanding contrast ratio of 1,300:1.
A newly developed progressive integrated circuit provides highly improved
playback of moving images. This enables full compatibility with 2-3 pull-
down and 1080i HDTV signals.
To eliminate ghosting in images, the canceller reduces signal interference
between the drive circuits on the LCD panels and between driven pixels.
This function automatically analyzes the signal components to select the
best sharpness setting. It operates on both RGB and video inputs and de-
livers clearer, sharper images.
Newly developed LCD panels and optical compensators, and an improved
cooling system have extended the life of the optical components and in-
creased overall reliability.
If one lamp is accidentally turned off when used in the high-brightness
mode, the system automatically switches over to the economy mode.
This fail-safe function* prevents a presentation from being interrupted.
* This function also performs in the economy mode (two-lamp mode) switching to a one-lamp mode, but color and bright-
ness correction is not performed. A switchover to the one-lamp mode only occurs if an emergency should arise.
The PLC-XF46N/E's interface slot accommodates a wide range of interface
boards,which allowsthe userto selectthe bestsolution forthe desired application.
This function allows the user to position the image easily (up/down and
left/right) even after the projector is installed. It is especially useful when
aligning images from two stacked units.
This makes it easier to adjust the white balance and gamma curve adjust-
ments to attain faithful color reproduction in almost any projection environ-
ment. The settings can be stored on a PC for later recall.
A wide variety off user-replaceable lenses, from short-
fixed to long zoom types, are optionally available.
P i c t u r e d : L N S - S 03
Outstanding12,000LumensofBrightness*
HighContrastRatioof1,300:1
NewProgressiveScanIC
HybridCrosstalkCanceller
IntelligentSharpnessControl
Long‑LifeOpticalComponents
Fail‑SafeDesign
AbundantOptionalLenses
Multi‑VersatileInterfacePlatform(MVIP)System
Motor‑DrivenLensShift
RealColorManagerPro
Professional Performance
Professional Reliability
Professional Flexibility
Model number
LCD panels
Aspect ratio
Number of pixels
Lens
Lamp
Screen size
Color reproduction
Brightness*2*3
Uniformity*2
Contrast*2
Resolution
RGB
Terminals
Input 1
Input 2
Input 3
Input 4
Control ports
Color systems
Scanning frequency
Power source
Power consumption
Dimensions (W x H x D)
Weight
*1
*2
*3
*4
*5
*6
*7
Screen size varies according to a mounted lens
Average values at shipment are shown, in accordance with the JIS X 6911:2003 specification format for data
projectors. Measurement meathods and conditions are based on Appendix 2 of the standard.
With the LNS-S03, in 4-lamp mode
With auto lamp control on
Projector may not display video from DVI input if the HDCP standard is changed.
Plug : NEMA 5-20P, 20A,125VAC.
Protrudings not included.
PLC-XF46N/E
1.8-inch TFT p-Si x 3
4:3
786,432 (1,024 x 768) x 3, Total: 2,359,296 pixels
Option
300 W UHP lamp x 4
40 -600 *1
Full color (16.77 million colors)
12,000 lm
90%
1,300:1 (full on/full off)*4
1,024 x 768 dots
Video: Video DVI-I x 1 (HDCP compatible*5)
Video: BNC x 5 (RGBHV, Y-Pb/Cb-Pr/Cr)
Video: Video BNC x 2 (Video, Y-C)
Video: Mini D-sub 15pin x 1
Serial In x 1, Serial Out x 1, Service (USB type B) x 1, Wired remote x 1
PAL/ SECAM/ NTSC/ NTSC 4.43/ PAL-M/ PAL-N
H sync: 15-120 kHz, V sync: 50-120 Hz, Dot clock: 230 MHz
XF46N:120V AC 50/60Hz*6
XF46E:200-240V AC 50/60Hz
1,700 W (20 W in standby mode)
581 x 252 x 783 mm*7
36.5 kg