Sanyo PLC-SW20 User manual

1000 ANSI LUMENS lTRUE SVGA lMULTIMEDIA PROJECTOR
Issued 11/01
PLC-SW20
SVGA Micro-mobile Multimedia Projector
10-BIT DIGITAL GAMMA CORRECTION FUNCTION
Through the gamma correction function, fine tone reproduction
is achieved without annoying white and black spots. In addition,
to the Standard mode, the PLC-SW20 also offers a Cinema
mode for movies and Real mode for graphics. Plus, the
projector has four user memory settings for fine picture
adjustments.
3D AUTOMATIC UNIFORMITY CORRECTION CONTROL
With the 3D-AUCC circuit color shading resulting from
differences in brightness can be corrected to an accuracy ten
times greater than using conventional methods. This produces
more natural looking color gradations.
FRONT EXHAUST MECHANISM
The air exhaust vent of the PLC-SW20 is positioned on the
front of theprojector for more effective absorption and
dissipation of heat, while at the same time creating a more
comfortable environment for presentations.
COMPONENT VIDEO INPUTS
The PLC-SW20 comes with component video inputs and a
newly developed Digital RGB Matrix IC that makes projection of
DVD (Y/Cb/Cr) and HDTV (Y/Pb/Pr) possible.
HDTV COMPATIBLE
The SANYO PLC-SW20 is High Definition Television
Compatible, accepting the 1080i, 1035i, 720p, 575p, 575i, 480p
and 480i HDTV resolution standards.
DIGITAL KEYSTONE CORRECTION
SANYO’s digital keystone correction feature compensates for
angled projector placement by digitally altering the pixels to
produce undistorted images.
PRESENTATIONTECHNOLOGIES
21605 Plummer Street
Chatsworth, CA 91311
Ph: 818.998.7322 ext. 288
Fax[phone]
www.sanyolcd.com
Specifications
Resolution SVGA (800 x 600)
Brightness (typical) 1000ANSILumens
Uniformity 90%
LCD Panel System 0.7” TFT Poly x 3
Number of Pixels 1,440,000 (480,000 x 3)
Contrast Ratio 350:1 (full on/off)
ProjectionImage(diagonal) 34”-200”
Aspect Ratio 4:3
Throw Distance 5.3’-26.5’
Zoom/Focus Manual (1:1.2 zoom)
Up/Down Ratio 19:1
Digital Keystone Correction +/-20°
ProjectionSystem Polarized Beam Splitter optical system
Projection Lens F1.6-1.78 / f1.13”-1.36”
Lens Throw Ratio 2.0-2.4:1
ProjectionLamp 150W UHP
Scanning Frequency H 15-100kHz;V50-100Hz
DotClock 140MHz
Color System PAL/PAL-M/PAL-N/SECAM/NTSC/NNTSC4.43
ComputerCompatibility XGA, SVGA, VGA
Sound OutputOne-piece, 1-watt Mono
Voltage 100-240V AC; 50/60/Hz (auto sense/select)
BTU Rating 853BTU
Power Consumption 250W
Dimensions (WxHxD) 10.1”x3.0”x9.1”
NetWeight 6.2 lbs.
User Maintenance Clean air filters, replace lamp assembly
PCInput Terminals D-Sub15 lAudio Mini-jack (stereo)
Video Input Terminal lComposite / Component RCA x 3
(Video/Y, Pb/Cb, Pr/Cr)
lS-Video (mini-DIN 4-pin)
lAudio Mini-jack (stereo)
Output Terminal Audio Mini-jack (stereo)
Control Port Terminal Mini DIN 8-pinlUSB type B
Included Accessories lWireless remote control (credit card type)
lAC power supply cordlOwner’s manual
lVGA computer cablelLens cap
lSoftcarry bag lLi cell batteries
Optional Accessories lRemote Control w/Laser pointer
& Mouse Pad (POA-RCKIT01)
l
PS/2 Control Cable (POA-MCPS2)
lSerial Control Cable (POA-MCSRL)
lADB Control Cable (POA-MCMAC)
lMAC/VGA adapter (POA-MACAP)
Warranty Three years parts and labor; 90 days lamp;
Quick Repair Program under warranty
Because its products are subject to continuous improvement, SANYO reserves the right to modify
product design and specifications without notice and without incurring any obligations.
POA-RCKIT01
Optional Remote Control
w/Laser Pointer & Mouse Pad
PLC-SW20 Terminal Input Panel