Sanyo VCC-ZM300 User manual

INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
VCC-ZM300
COLOR CCD ZOOM camera
Caméra CCD COULEURS avec ZOOM
Cámara CCD ZOOM A COLOR
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
À propos de ce manuel
Avant d’installer et d’utiliser la caméra, veuillez lire ce manuel
attentivement. Gardez-le à portée de main pour toute référence
ultérieure.
Acerca de este manual
Lea cuidadosamente este manual antes de instalar y usar
la cámara. Asegúrese de guardarlo a su alcance para
futuras consultas.
L5AA2/US GB 2002, 5, 24

CONTENTS
INFORMATION TO USER ......................................................... 2
PRECAUTIONS.......................................................................... 3
PARTS NAMES AND FUNCTIONS ........................................... 4
CONNECTIONS ......................................................................... 6
Basic connection for onitoring or recording......................... 6
Connection of peripheral equip ent and controller
ter inal...................................................................................... 7
DISPLAYING/CLOSING THE MENU SCREEN .......................... 8
MENU ITEM FLOW AND MENU OPERATION........................ 9
LANGUAGE SETTING............................................................... 10
CAMERA ID SETTING............................................................... 11
Ca era ID setting...................................................................... 11
SYNC SETTING (SYNC) ............................................................ 12
Power source synchronization (L-L) setting ............................ 12
PRIVACY MASK SETTING (PRIVACY MASK) ......................... 13
Mask setting .............................................................................. 13
PASSWORD setting ................................................................... 15
PASSWORD LOCK cancellation................................................. 16
PASSWORD changes ................................................................. 16
LENS SETTING (LENS).............................................................. 17
FOCUS setting............................................................................ 17
ZOOM setting ............................................................................ 20
MIRROR SETTING..................................................................... 21
VIEW SETTING ITEM FLOW..................................................... 22
VIEW SETTING.......................................................................... 24
AIRIS setting ....................................................................................... 24
Autoiris setting (AUTO) ............................................................ 24
SENSE UP setting....................................................................... 29
LEVEL setting ............................................................................. 29
Manual iris setting .................................................................... 30
BWHITE BALANCE adjust ent ......................................................... 31
MWB setting ............................................................................. 32
ATW setting............................................................................... 32
AWC setting .............................................................................. 34
CElectronic SHUTTER setting ............................................................ 35
Fast shutter speed (SHORT) ode setting.............................. 35
Slow shutter speed (LONG) ode setting.............................. 36
DMOTION detector setting ............................................................... 37
MOTION MASKING setting...................................................... 39
SENSITIVITY setting.................................................................. 40
ZOOM setting............................................................................ 41
INTERVAL setting...................................................................... 41
ALARM SIGN setting................................................................. 42
EProfile co pensation setting (APERTURE) .................................... 43
FAuto atic gain control (AGC) setting ........................................... 44
GGAMMA correction setting............................................................. 45
OPTION SETTING ..................................................................... 46
CONTROL setting ...................................................................... 46
ADDRESS setting....................................................................... 47
ALARM setting .......................................................................... 47
AAlar input setting (ALARM IN) ............................................. 47
BAlar output setting (ALARM OUT) ....................................... 49
COperation of alar signal output to the Syste
Controller setting (LINE OUT) .................................................. 50
MENU FLOW............................................................................. 51
SPECIFICATIONS ...................................................................... 53
MAIN FEATURES...................................................................... 54
L5AA2/US GB 2002, 5, 24
English
1

INFORMATION TO USER
Safety Guard
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE LITERATURE
ACCOMPANYING THIS UNIT.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This installation should be made by a qualified ser ice person and
should conform to all local codes.
For the custo ers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour la clientèle canadienne
Cet appareil numerique de la Classe B est conforme à la
norme NMB-003 du Canada.
This equipment has been tested and found to comply with the limits
for a Class B digital de ice, pursuant to Part 15 of the FCC Rules.
These limits are designed to pro ide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
Howe er, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or tele ision reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the recei ing antenna.
– Increase the separation between the equipment and
recei er.
– Connect the equipment into an outlet on a circuit different
from that to which the recei er is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
This de ice complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This de ice may
not cause harmful interference, and (2) this de ice must
accept any interference recei ed, including interference that
may cause undesired operation.
Changes or modifications not expressly appro ed by Sanyo
may oid the user’s authority to operate this camera.
L5AA2/US GB 2002, 5, 24
English
2

PRECAUTIONS
In case of proble
Do not use the camera if smoke or a strange odour comes from
the unit, or if it seems not to function correctly. Disconnect the
power cord immediately, and consult your dealer (or a Sanyo
Authorized Ser ice Centre).
Do not open or odify
Do not open the cabinet, as it may be dangerous and cause
damage to the unit. For internal settings and repairs, consult your
dealer (or a Sanyo Authorized Ser ice Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get
inside the camera. If used with a foreign object inside, it could
cause a fire, short-circuits or damages.
If water or a liquid gets inside the camera, disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Ser ice Centre). Be careful to protect the camera from rain, sea
water, etc.
Be careful when handling the unit
To pre ent damages, do not drop the camera or subject it to
strong shock or ibration.
Install away fro electric or agnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, audio speakers the magnetic field they generate will
distort the image.
Protect fro hu idity and dust
To pre ent damages to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high,
or where there is a lot of dust.
Protect fro high te peratures
Do not install close to sto es, or other heat generating de ices,
such as spotlights, etc., or where it could be subject to direct
sunlight, as that could cause deformation, discoloration or other
damages.
Be careful when installing close to the ceiling, in a kitchen or
boiler room, as the temperature may raise to high le els.
Install where the temperature range will stay between –10°C and
50° C. (no condensation)
Cleaning
•Dirt can be remo ed from the cabinet by wiping it with a soft
cloth. To remo e stains, wipe with a soft cloth moistened with
a soft detergent solution and wrung dry, then wipe dry with a
dry soft cloth.
•Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling.
Before using a chemical cloth, make sure to read all
accompanying instructions. Make sure that no plastic or
rubber material comes in contact with the cabinet for a long
period of time, as that may cause damage or paint peeling.
L5AA2/US GB 2002, 5, 24
English
3

PARTS NAMES AND FUNCTIONS
1Video output connector (VIDEO OUT: BNC type)
Connect this connector to a de ice such as a time lapse VCR or
monitor with a VIDEO IN connector.
2Power indicator (POWER)
Comes on when the power to the camera is on.
Note: After connecting the power supply the POWER indicator
will blink for 5 seconds. During this time no adjustments
using the menus or any other operation are possible.
3Cursor button (See p8)
j: Press this button to mo e the cursor up.
c: Press this button to mo e the cursor to the right, or to
turn the settings ON/OFF etc.
d: Press this button to mo e the cursor to the left, or to turn
the settings ON/OFF etc.
l: Press this button to mo e the cursor down.
4Menu setting button (SET) (See p8)
Connect the camera to the monitor, then press the SET
button for about 3 seconds to display the on-screen menu.
5RS-485 control push-lock ter inals (RS485, A, B, G)
Use a cable thicker than AWG22.
A: Twisted-pair cable terminal G: Ground terminal
B: Twisted-pair cable terminal
624 V AC or 12 V DC input ter inals (AC 24 V, DC 12 V,
GND)
Lens cap
The cap is installed to protect the lens section. Remo e the cap
when using the camera.
SET
RS485
GND
AC24V
DC12V CLASS 2 WIRING
ABG
POWER
VIDEO OUT
FOCUS ALARM IN
OUT
ZOOM COM
2
5
6
4
3
1
Control
ter inals
L5AA2/US GB 2002, 5, 24
English
4

PARTS NAMES AND FUNCTIONS
Ca era installation bracket
The bracket can be fixed at the top or bottom of the camera.
When fixing the bracket, be sure to use the longer screws and
install the shorter screws on the opposite side to seal the
openings.
CAUTION: When installing the camera bracket, select a location
that can support the total weight of the camera and
accessories.
Control ter inals (See p7)
1Zoo ter inal (ZOOM)
Sets the zoom to wide angle or telescoping.
2Focus ter inal (FOCUS)
Sets the focus to infinite or close range.
3Grounding ter inal (COM)
4Alar output ter inal (ALARM OUT)
A detection alarm based on the motion sensor is sent to
connected equipment such as a buzzer or lamp or a time
lapse VCR de ice.
5Alar input ter inal (ALARM IN)
Used for detection of intruders through a connected
external alarm switch.
FOCUS ALARM INZOOM COM
12345
OUT
L5AA2/US GB 2002, 5, 24
English
5

CONNECTIONS
Basic connection for onitoring or recording
The peripheral devices (VCR, onitor, lens, etc.) and cables
are sold separately.
1Make the video signal connection between the ca era
and the onitor or ti e lapse VCR.
2Power supply choices
•Use a commercially a ailable 24 V AC adaptor. Make sure
to use a cable with an earth line (22AWG or more) to
connect to the grouding terminal. (Fig.1.)
•When using a DC 12 V power supply, make the
connections as indicated in Fig. 2.
CAUTION:
To pre ent camera and/or power supply failure, pay close
attention to polarity when making the connections.
3Insert the plug of this power supply into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
GND
AC24V
DC12V CLASS 2 WIR
GND
AC24V
DC12V CLASS 2 WIR
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
AC 24 V connection DC 12 V connection
Fig. 1 Fig. 2
Ti e lapse VCR or
Digital video recorder
(sold separately)
TV onitor
(sold separately)
L5AA2/US GB 2002, 5, 24
English
6

CONNECTIONS
Coaxial cable type and axi u length
•Cable type RG-59U (3C-2V), 250 m maximum.
•Cable type RG-6U (5C-2V), 500 m maximum.
•Cable type RG-11U (7C-2V), 600 m maximum.
CAUTION:
•The RG-59U type cable should not be run through electrical
conduits or through the air.
•Using CCTV/Video-grade coaxial cable.
Connection of peripheral equip ent and
controller ter inal
GAB
Syste controller (sold separately)
RS-485 connector
Multiplexer
(sold separately)
Buzzer or la p
CAMERA IN
ter inal
External alar
switch
• Focus adjust ent
DC+6V/12V: Infinite
DC–6V/12V: Close range
• Zoo adjust ent
DC+6V/12V: Wide angle
DC–6V/12V: Telescoping
G
ABG
AB
L5AA2/US GB 2002, 5, 24
English
7

DISPLAYING/CLOSING THE MENU SCREEN
1Press the SET button for about 3 seconds.
The MAIN MENU screen will appear.
2Using the cursor button
1Use the cursor button (l) to mo e the cursor down.
When the cursor reaches the bottom of the screen, it goes
back up to the top of the screen.
2Use the cursor button (j) to mo e the cursor up. When
the cursor reaches the top of the screen, it goes back
down to the bottom of the screen.
3Use the cursor button (c) to mo e the cursor to the right.
This button is also used to change ON/OFF settings etc.
4Use the cursor button (d) to mo e the cursor to the left.
This button is also used to change ON/OFF settings etc.
3Switching to sub- enu screens
Use the cursor button (j l d c) until an item with a “y”
next to it is flashing, then press the SET button.
4 Closing a settings screen
•To return to the pre ious screen, use the cursor button (l)
to select BACK for MENU, then press the SET button.
•To return to the normal screen, use the cursor button (d or
c) to select END for MENU, then press the SET button.
☞Returning to the default setting
Use cursor button (l, then d or c) to change the PRESET
setting to ON, then press the SET button.
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
LANGUAGE
LANGUAGE ENGLISH
LANGUE FRENCH
SPRACHE GERMANY
MENU BACK
MAIN MENU screen Sub- enu screen
SET
Cursor button SET button
L5AA2/US GB 2002, 5, 24
English
8

MENU ITEM FLOW AND MENU OPERATION
1 LANGUAGE setting (See p10)
Choose from among English, French and Spanish.
2 CAMERA ID setting (See p11)
3SYNC setting (See p12)
Sets camera to internal synchronization (INT) or power source
synchronization (L-L).
Power source synchronization, the ertical synchronization phase
as adjusted on a sub-menu screen.
4 PRIVACY MASK setting (See p13)
This co ers an area of the screen with a gray pattern for areas
that may infringe on pri acy.
Gray patterns can be placed on up to 4 areas.
5LENS setting (See p17)
Sets camera to automatic focus or manual focus. Zoom speed and
magnification is also set here.
6 MIRROR setting (See p21)
The image can be rotated horizontally then ertically or ertically
then horizontally.
7 VIEW SETTING (See p22)
Different detailed settings can be made for each camera (9
screens). After they are set, these are linked to “VIEW SETTING
(0 – 8)” settings for preset positions.
8OPTION setting (See p46)
For setting communications conditions and alarms.
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
1 2 3 4 5 6 7 8
L5AA2/US GB 2002, 5, 24
English
9

LANGUAGE SETTING
Select one of the languages shown on the menu screen (English, French, Spanish).
1In the MAIN MENU, use the cursor button (j or l) to
select SET for LANGUAGE, then press the SET button.
The LANGUAGE screen will appear.
2Use the cursor button (j or l) to ove the cursor to
language (exa ple: “FRENCH”) then press the SET
button.
The interface language becomes French.
3Use the cursor button (j or l) to select RETUOR for
MENU, then press the SET button.
The MAIN MENU screen will reappear.
Information in the MAIN MENU screen will appear in the
selected language.
☞Use the cursor button (l) to select END, then press the
SET button. The display will return to the nor al
onitor screen.
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
LANGUE
LANGUAGE ANGLAIS
LANGUE FRANCAIS
IDIOMA ESPAGNOL
MENU RETOUR
LANGUAGE
LANGUAGE ENGLISH
LANGUE FRENCH
IDIOMA SPANISH
12
3
L5AA2/US GB 2002, 5, 24
English
10

CAMERA ID SETTING
Ca era ID setting
Exa ple: Setting the Ca era ID to “CAM 1”
1Use the cursor button (j or l) to ove the cursor to
CAMERA ID, and then use the cursor button (d or c) to
change the setting to ON. Then press the SET button.
The CAMERA ID SETTING screen will appear.
2Use the cursor button (j l d c) to ove the cursor to
the letter “C” in the character selection palette, then
press the SET button.
☞After at least one character is displayed in the ID field,
the carriage return ark (y) will appear at the lower
right corner of the character selection palette. Selecting
this ark between the characters of the field will create
a new line at that place.
3Use the sa e steps to select “A”, “M” and “1” fro the
palette, then press the SET button.
The characters “CAM1” appear in the ID field.
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID ON ‚
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
01 3456789 :-‚
ID ????????????????
-
POSITION SET ‚
PRESET OFF
MENU BACK
ID CAM1????????????
-
Ca era ID screen
1Character selection palette:
By mo ing the cursor to letters or numbers in this
palette, you can select characters.
Selected characters will appear in the corresponding
field under ID.
2ID:
The ID entry field shows 16 question marks (?). The ID
will not be displayed on the screen.
3POSITION:
After characters are displayed in the ID field, mo ing
the cursor to the POSITION field with the cursor button
and pressing the SET button will display the camera ID
on the normal screen.
4PRESET:
When this item is turned to ON, the ID fields are
cleared (question marks appear). Use this function
when you want to change the ID.
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
01 3456789 :-‚
ID ????????????????
-
POSITION SET ‚
PRESET OFF
MENU BACK
1
2
3
4
L5AA2/US GB 2002, 5, 24
English
11

CAMERA ID SETTING
4Use the cursor button (j or l) to ove the cursor to
POSITION, and then press the SET button.
The camera ID will be displayed on one line.
(Displaying the ID on 2 lines.)
1Use the cursor button (d or c) to mo e the cursor to the
location in the ID field where the carriage return is wanted.
2Use the cursor button (j l d c) to mo e the cursor to
the carriage return mark (y) at the lower right corner of
the character selection palette, and then press the SET
button.
5Moving the on-screen title display position
Use the cursor button (j l d c) to ove the title
display to the preferred position on the screen, then
press the SET button.
The CAMERA ID SETTING screen will reappear.
SYNC SETTING (SYNC)
Initial setting is internal synchronization (INT), so it does not need
to be set again. Follow the steps below to change the setting to
power source synchronization (L-L).
Power source synchronization (L-L) setting
1Use the cursor button (j l d c) to select L-L for
SYNC, then press the SET button.
The L-L SETTING screen will appear.
2Use the cursor button (d or c) to adjust the position
of the vertical synchronization indicator shown on the
screen.
The numerical alue will change, allowing adjustment of
ertical synchronization.
☞To close the enu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
CAMERA ID SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
01 3456789 :-‚
ID CAM1????????????
POSITION SET ‚
PRESET OFF
MENU BACK
CAM1
Ca era ID
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
L-L SETTING
(V SYNC PHASE)
ú------+------ü 0
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
English
12

PRIVACY MASK SETTING (PRIVACY MASK)
Mask setting
1Use the cursor button (j or l) to select SET for
PRIVACY MASK, then press the SET button.
The PRIVACY MASK SETTING screen will appear.
2Use the cursor button (j or l) to ove the cursor to
SET for MASK SET and press the SET button.
The MASK NO. SELECT screen will appear.
Note: When PASSWORD LOCK is ON, mo ing the cursor to
MASK SET and press the SET button to bring up a
password access screen. The password must be entered in
this screen.
3Use the cursor button (j or l) to ove the cursor to a
ask nu ber (Ex: MASK 3), and then use the cursor
button (c) to change the setting to SET. Then press the
SET button.
The MASK 3 SET (POSITION) screen will appear, and SETy
will be blinking. The gray mask will appear in the center of the
screen.
Cursor button operation
OFF: to c side (ON appears), to c side again (SET appears)
•SET: Mask POSITION and SIZE can be set
•ON: Masks can be displayed
•OFF: Masks can be deleted
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
MASK NO.SELECT
MASK 1 OFF
MASK OFF
MASK 3 OFF
MASK 4 OFF
3
MASK NO.SELECT
MASK 1 OFF
MASK OFF
MASK 3 SET ‚
MASK 4 OFF
PRESET OFF
MENU BACK
MASK 3 SET
(POSITION)
SET ‚
L5AA2/US GB 2002, 5, 24
English
13

PRIVACY MASK SETTING (PRIVACY MASK)
(About the POSITION screen)
It is possible to set as many as 4 masks on the same POSITION
screen.
4Use the cursor button (j l d c) to ove the gray
ask, then press the SET button.
The SIZE screen will appear, and the mask that was positioned
in the POSITION screen will be displayed.
5Use the cursor button (j l d c) to adjust the size of
the gray ask, then press the SET button.
PRESET and MENU will appear at the bottom of the screen.
Mo e the cursor to BACK for MENU and press the SET button.
The screen will return to MASK NO. SELECT.
☞To close the enu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
34
MASK 1 2
45
MASK 3 SET
(SIZE)
SET ‚
MASK 3 SET
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
English
14

PRIVACY MASK SETTING (PRIVACY MASK)
PASSWORD setting
You can lock the pri acy masks in place as gray patterns after they ha e been set. The password requirement is initially set to OFF, but to
begin using it, you must enter the factory set password “1234”.
1Use the cursor button (j or l) to ove the cursor to
OFF for PASSWORD LOCK in the PRIVACY MASK
SETTING screen. Then press the SET button.
The PASSWORD screen will appear.
2Enter the factory set password “1234”.
Use the cursor button (j or l) to select “1”, then use
the cursor button (c).
To mo e the cursor to the next “*” digit.
3Use the sa e steps to enter “2,” “3,” and “4,” then press
the SET button.
“OK” will appear and BACK for MENU will be blinking. Press
the SET button again. The PRIVACY MASK SETTING screen
will reappear and “ON” will be blinking for PASSWORD LOCK.
Note: If a different password is required, “NG” will appear.
Please carefully maintain the password so that it will not be
forgotten.
1
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
MENU BACK
PASSWORD
¤¤¤¤ SET ‚
-
MENU BACK
1¤¤¤
3
PASSWORD
1 34 SET ‚
-
OK
MENU BACK
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
MENU BACK
L5AA2/US GB 2002, 5, 24
English
15

PRIVACY MASK SETTING (PRIVACY MASK)
PASSWORD LOCK cancellation
For use when PASSWORD LOCK is ON
1Press the SET button.
The PASSWORD screen will appear.
2Enter the factory set password “1234”.
Use the cursor button (j or l) to select “1”, then use
the cursor button (c).
To mo e the cursor to the next “*” digit.
3Use the sa e steps to enter “2,” “3,” and “4,” then press
the SET button.
“OK” will appear and BACK for MENU will be blinking. Press
the SET button again. The PRIVACY MASK SETTING screen
will reappear and “OFF” will be blinking for PASSWORD LOCK.
PASSWORD changes
You can change the password with PASSWORD LOCK in either
the ON or OFF setting.
1Use the cursor button (j or l) to ove the cursor to
SET for PASSWORD CHANGE and press the SET button.
The PASSWORD (NOW PASSWORD) screen will appear.
2Use the cursor button (d or c, j) to enter the current
password (Ex: 1234), then press the SET button.
The PASSWORD (NEW PASSWORD) screen will appear.
3Use the cursor button (d or c, j) to enter a new
password (Ex: 4321), then press the SET button.
“OK” will appear and BACK for MENU will be blinking. Press
the SET button again.
The PRIVACY MASK SETTING screen will reappear.
13
PASSWORD
¤¤¤¤ SET ‚
-
MENU BACK
PASSWORD
1 34 SET ‚
-
OK
PRIVACY MASK SETTING
PASSWORD LOCK OFF ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
12
PRIVACY MASK SETTING
PASSWORD LOCK ON ‚
PASSWORD CHANGE SET ‚
MASK SET SET ‚
PASSWORD
(NOW PASSWORD)
**** SET ‚
-
PASSWORD
(NOW PASSWORD)
1 34 SET ‚
-
PASSWORD
(NEW PASSWORD)
**** SET ‚
-
L5AA2/US GB 2002, 5, 24
English
16

LENS SETTING (LENS)
This item allows adjustment of focus (for manual focus or autofocus) and adjustment of zoom when needed.
FOCUS setting
☞Setting the anual focus (MANU)
Sets a limit for near distance focusing and sets focus speed for manual focus.
1Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2Use the cursor button (d or c) to select MANU, then
press the SET button.
The FOCUS SETTING screen will appear.
3LIMIT NEAR focus distance setting
Use the cursor button (j or l) to ove the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 5M, 10C (centimeters),
30C, 50C
Note: Focusing becomes difficult when near distance limit is set
to less than “1M”.
4SPEED of focus setting
Use the cursor button (j or l) to ove the cursor to
SPEED, then use the cursor button (d or c) to select the
focus adjust ent speed value. (Ex: 3)
Available settings: 1, 2, 3, 4 (Quickest speed)
☞To close the enu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
LENS
FOCUS MANU ‚
ZOOM SET ‚
FOCUS SETTING
LIMIT NEAR 1M
SPEED
PRESET OFF
MENU BACK
3
FOCUS SETTING
LIMIT NEAR 3M
SPEED
PRESET OFF
MENU BACK
4
FOCUS SETTING
LIMIT NEAR 3M
SPEED 3
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
English
17

LENS SETTING (LENS)
☞Setting the autofocus (AUTO)
Sets a limit for near distance focusing and sets focusing sensiti ity and focus iris.
Note: As a normal practice, use manual focus when keeping the camera focused on the same target object for a long period of time
(o er 24 hours). This can be used with the one-push autofocus function when needed (operated from the system controller). Long
periods of sur eillance with the autofocus in operation will shorten the work life of the lens.
1Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2Use the cursor button (d or c) to select AUTO, then
press the SET button.
The FOCUS SETTING screen will appear.
3LIMIT NEAR focus distance setting
Use the cursor button (j or l) to ove the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 5M, 10C (centimeters),
30C, 50C
Note: Focusing becomes difficult when near distance limit is set
to less than “1M”.
4Setting focus SENSITIVITY
Use the cursor button (j or l) to ove the cursor to
SENSITIVITY, then use the cursor button (d or c) to
change the setting. (Ex: LOW)
Available settings:
•HIGH: High sensiti ity focusing
•LOW: Low sensiti ity focusing
Note: When focus SENSITIVITY is set to HIGH, it may react to
e en slight mo ements of the target object. In this case,
change the setting to LOW.
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
LENS
FOCUS AUTO ‚
ZOOM SET ‚
FOCUS SETTING
LIMIT NEAR 1M
SENSITIVITY HIGH
AREA SET ‚
34
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY HIGH
AREA SET ‚
PRESET OFF
MENU BACK
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY LOW
AREA SET ‚
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
English
18

LENS SETTING (LENS)
5Use the cursor button (j or l) to ove the cursor to
SET for AREA, and press the SET button.
The AREA SETTING screen for AREA 2 (initial setting) will
appear to allow setting of focus target area.
6Use the cursor button (d or c) to select the focus target
area. (Ex: 3)
The focus target area will become narrow.
Available settings: 1/full screen, 2/center of screen,
3/smaller center
☞To close the enu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
5
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY LOW
AREA SET ‚
PRESET OFF
MENU BACK
AREA SETTING
AREA
PRESET OFF
MENU BACK
6
AREA SETTING
AREA 3
PRESET OFF
MENU BACK
L5AA2/US GB 2002, 5, 24
English
19