SAS LUMIRANK X2 RACELINK User manual

X2 RACELINK
Installation Guide
LED POSITiON SYSTEM
> 1x LUMIRANK 12V Power Cable (M12 green Plug open wire ) A)
> 1x MyLaps X2 RaceLink with RF Antenna & GPS Antenna B)
> 1x LUMIRANK LED Position Display C)
> 1x STS / LUMIRANK Driver Info Display V20 Voice D)
> 1x ML M8 Y ext. Cable (Female / Male / Female)E)
> 1x SAS M8 / DTM / DEUTSCH / Log. Connetion Cable (for X2 RaceLink )F) only PRO
SYSTEM ITEMSSET UP
DRIVER INFO DISPLAY
A)
C) D)
B)
E) F)

Connection INFO
SAS-Technologies e.K. I Heckenweg 12 I D- 90469 Nuernberg I inf[email protected]
A)
C)
D)
B)
E)
F)
LUMIRANK 12V Power Cable > connect to MAIN VDD (on during PitStop) A)
MyLaps X2 RaceLink > Antenna needs to be mounted on the roof ! B)
LUMIRANK Position Display > Please see Install Guidelines and Series InstructionsC)
STS / LUMIRANK Driver Info Display > Must be visible to the driver - connect to M8 Y D)
ML M8 Y Cable (Female / Male / Female) > connect LR & DID & X2 RaclinkE)
SAS M8/DTM/ DEUTSCH / Logger > use only on X2Pro and for Logger connection.F)
SYSTEM Connection