SATLOOK Micro G2 User manual

SATLOOK Micro G2
Upgrade
English manual

Please follow the instruction elow (step y step).
Please follow the instruction elow (step y step).Please follow the instruction elow (step y step).
Please follow the instruction elow (step y step).
Phase 1. Downloading of new G2
Phase 1. Downloading of new G2Phase 1. Downloading of new G2
Phase 1. Downloading of new G2-
--
-software.
software.software.
software.
1. Start y inserting the CD into the computer. Open up the CD-li rary/folders.
2. Connect the instrument and the PC with the serial-ca le (RS232).
Notice
NoticeNotice
Notice that the instrument must e turned off.
3. There is a folder in CD-li rary called; -Firmware. Enter this folder.
4. Run the file: FDL.EXE (dou le click the left mouse- utton).
- select input port on the computer (normally Com1 or Com2).
- Click: Send Firmware.
5. And do the following::

6. Select the: sm282-EU.hex-file in the Firmware folder.
7. Installation of Phase 1
Phase 1Phase 1
Phase 1 is completed when the ar reaches 100 %
Phase 2. Activating the Spectrum
Phase 2. Activating the SpectrumPhase 2. Activating the Spectrum
Phase 2. Activating the Spectrum-
--
-analyzer function.
analyzer function.analyzer function.
analyzer function.
Notice, this step requires an Internet-connection.
1. Start y inserting the CD into the computer . Open up the CD-li rary/folders.
2. Connect the instrument and the PC with the serial-ca le (RS232).
Notice
NoticeNotice
Notice that the instrument must e turned off.
3. There is a folder in CD-li rary called; -Unlock. Enter this folder.
4. Run the file: keygenNET.EXE (dou le click the left mouse- utton).
- select input port on the computer (normally Com1 or Com2).
5. And do the following:

6. Enter the Purchase key-num er (Authentication key) printed on the enclosed
sticker in the Upgrade kit.
7. Installation complete when OK is selected.
• Please contact: [email protected] if You have pro lems upgrading Your
meter.
• The Authentication nr can e used for any Satlook Micro. However, when
used y a meter this num er will e locked to that meter and can not e used
with any other meter.
• If You encounter pro lems when downloading Phase 1, step 7 please try with
another computer efore contacting Emitor.