Saxon 3350437 User manual

Parts List
Step 6: Locate both leg braces (F) and ensure the
long side is near the centre of the frame brace (D)
and the short side is closest to the leg (E) – refer to
image. Bring both of leg braces together so that
they meet in centre of the frame brace (D) and
secure with small bolt (L), spring washer, washer
and nut.
Step 7: Attach the leg brace (F) to each leg, using small bolt (L) and secure with
spring washer, washer and nut. Repeat for the other side.
Step 8: Insert the small bolt (L) through the inside of
the tray, the front support (G) and the front support
plate (H). Secure with spring washer, washer and nut.
Make sure the front support brace is in correct position
and do not secure this brace to the handle frame at this
stage. This needs to occur in the next step(refer to
image)
Step 9: Attach the Axle bracket (I), to the front of the
handle frame, using medium bolt (M). Ensure the
dimple you can see on the axle bracket is facing
outwards (refer to image). Secure with spring washer,
washer and nut. Please note: only secure one of the
axle brackets in place.
Step 10: Slide the axle (J) through the wheel (K) and
insert into the xed axle bracket. Using medium bolt (M)
secure the other axle bracket (I) into position with spring
washer, washer and nut.
Step 11: Tighten all nuts securely. Inate the tyre to a maximum 25PSI. Please ensure you use a manual pump to
avoid injury and do not over inate.
Your wheelbarrow is now fully assembled and ready for use.
4 of 4 1 of 4
A. Fork 1
2
1
1
2
2
2
1
2
1
1
5
4
4
C. Tray
B. Handle Grips
D. Frame Brace
F. Leg Brace
E. Leg
G. Front Support
I. Axle Bracket
H. Support Plate
J. Axle
L. Bolt Small
K. Wheel
M. Bolt Medium
N. Bolt Long
60 LITRE GARDEN WHEELBARROW
(Item No. 3350437)
Assembly Instructions
Picture Description Qty Picture Description Qty
Long
side
Short
side

ASSEMBLY
Step 1: Join the fork (A) and the handle grips (B) together.
Step 2: Turn the tray (C) on to its side, and connect the handles to the
tray using the long bolt (N). Insert this bolt through the front tray holes
and loosely tighten.
Step 3: Slide the frame brace (D) between the tray and the rear holes
of the handle grips.
Step 4: While holding the wheelbarrow tray on it’s side, place one leg
(E) onto the handle grips and insert the long bolt (N) through the rear
hole of the tray, frame brace, handle and leg. Secure with spring
washer, washer and nut (hand tighten only).
Step 5: While holding the wheelbarrow tray on its side, remove the nut from the bolt inserted in step 2. Then
insert the long bolt (N) through the tray, handle and leg and secure using a spring washer, washer and nut.
Repeat on the other side.
2 of 4 3 of 4
A. Fork
C. Tray
B. Handle Grips
D. Frame Brace
G. Front Support
I. Axle Bracket
Nuts
Spring Washers
Washers
E.Leg
F.Leg Brace
Handle
H. Support Plate
J. Axle
L.Bolt Small
K. Wheel
M. Bolt Medium
M. Bolt Medium
N. Bolt Long
60 LITRE GARDEN WHEELBARROW
(Item No. 3350437)
Assembly Instructions
This side
facing up
Make sure
hole faces to
the back