Scag Power Equipment V-ride User manual

WWW.SCAG.COM
®
Engine Options:  Kawasaki FX541, air-cooled, twin cylinder, vertical shaft (recoil start)
 Kawasaki FX600, air-cooled, twin cylinder, vertical shaft
 Kawasaki FX691, air-cooled, twin cylinder, vertical shaft
 Kawasaki FX730, air-cooled, twin cylinder, vertical shaft
 Kawasaki FX801, air-cooled, twin cylinder, vertical shaft
Fuel Capacity/Design:  5.5 gallons, single tank with top-mounted fuel shutoff valve (36” & 48”)
 8 gallons, single tank with top-mounted fuel shutoff valve (52” & 61”)
Travel Control: Twin lever steering controls for smooth, precise maneuverability
Ground Speed:  Up to 7.7 mph forward (36” model), 6 mph reverse
 Up to 8.5 mph forward (48” & 52” models), 6 mph reverse
 Up to 11 mph forward (61” model)
Drive Tires:  18 x 8.5 - 8, 4 ply (36” model)
 20 x 10.5 -8, 4 ply (48”, 52” & 61” models)
Caster Tires: 11 x 4 - 5, Flat-Free, semi-pneumatic
Caster Wheel Bearings: Tapered roller bearings
Hydraulic Pumps: Dual Pumps; 10cc displacement (12cc on 61”), Hydro-Gear
Hydraulic Wheel Motors: Dual 12ci heavy-duty motors with extra large shafts
Hydraulic Oil Cooling:  Auxiliary oil cooler (48”, 52” & 61” models)
 Large capacity cooling reservoir (all models)
Hydraulic Oil Filter: 10 micron
Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening
Drive/Load Pulleys: Split-steel design -- stronger and lighter weight
than cast-iron
Specications
Stand up for productivity!
(Continued)

WWW.SCAG.COM
®
Instrument Panel : Key switch, throttle, manual choke, BBC switch, digital hour meter, neutral lock
lever
Operator Platform: Heavy gauge steel with extruded star pattern for no-slip footing. Platform can
be folded forward to reduce overall machine, as well as allow operator to walk
behind the mower (with or without blades on). Coil suspension under platform
utilizes 3.5 inch springs; 1.25 inches of suspension travel.
Operator Comfort Pad: Adjustable tto fit different operator sizes and riding styles
PTO - Electric Clutch: Heavy-duty Ogura PTO clutch brake with adjustable air-gap
Cutter Decks: 36” Advantage deck; 48”, 52” & 61” Velocity Plus decks. Floating, adjustable,
anti-scalping design.
Cutter Deck Construction: Tri-Plate, fully-welded: 36” & 48” with 7 gauge deck top and skirt, 10 gauge
and 11 gauge reinforcement plates; 52” with 10 gauge top, 7 gauge skirt, 10
gauge and 11 gauge reinforcement plates; 61” with 10 gauge top, 7 gauge
skirt, 7 gauge and 11 gauge reinforcement plates.
Number of Anti-Scalp Wheels:
 36": 4 wheels in 3 positions
 48": 5 wheels in 3 positions
 52”: 7 wheels in 5 positions
 61”: 9 wheels in 7 positions
Cutter Deck Spindles: Scag Heavy-Duty Spindles w/cast-iron housing & tapered roller bearings,
backed by 3-year limited warranty
Cutter Deck Height Adjustment:
Hand lever lift with self-locking mechanism at transport position
Cutting Range: 1-1/2” to 4-1/2” in 1/4” increments
Number of Cutter Blades: 3 Marbain blades
Total Length:  36" models: 71"
 48” models: 69.5"
 52" models: 71.75"
 61" models: 75.5"
Total Width - with discharge chute in mowing position): / (with discharge chute in transport position):
 36" models: 47.75"  36" models: 37.25"
 48" models: 61.25"  48" models: 49.75"
 52” models: 65.25”  52” models: 53.75”
 61" models: 74.25"  61" models: 62.75"
Height:  36" models: 46.5"
 48”/52”/61” models: 47.5"
Weight:  36" models: 775 lbs.
 48”/52" models: 860 lbs.
 61" models: 975 lbs.
Warranty:  2 Yr. Commercial Mower Warranty—Parts & labor.
 3 Yr. / 500 Hour Non-Commercial Mower Warranty—Parts & labor.
 3 Yr. Deck Warranty—First & second years parts & labor; third year parts.
 3 Yr. Spindle Warranty—First & second years parts & labor; third year parts.
 2 Yr. Engine Warranty—Minimum two-year warranty covered directly
through the individual engine manufacturer.
All specifications subject to
change without notice. Actual
speeds may vary.