Scandlight T-BAR 108 User manual

Item no: 935779
SCANDLIGHT T-BAR 108 LED SYSTEM

Our SCANDLIGHT T-BAR 108 LED SYSTEM offers many possibilities to achieve the effects
which you want. It is pack-and-go for DJs, bands, nightclubs and other performers who want a
complete LED wash light system. This system includes PAR-BAR, a four-pedal foot switch,
adjustable tripod, packing bag and transport case. Please read the manual before operation.
A. SPECIFICATION:
1. Weight: 13kgs
2. Size: 1200*2400mm
3. Power input: AC100-240V/50-60HZ
4. Wattage: 50W
5. LEDS: 432 (144 red, 144 green, 144 blue) 10mm LEDs (108 per light)
6. Beam angle: 30 degree
7. 3 pin female XLR socket and 3 pin male XLR socket
8. Each light height adjustable.
9. RGB control of 4 separate lights
10. Independent positioning of each light
11. four-pedal foot switch: auto run, sound active, freeze, blackout
12. Working place: indoor, temperature: -20 °C~+ 45° C, humidity: 0%-90%.
13．LED display for easier operation.
14. Selectable built-in programs,Auto running, DMX mode, M/S, sound-active mode.
15. 7 selectable DMX modes: 2, 3, 4, 7, 8, 14, 15 DMX channels mode.
This system includes: PAR-BAR, a four-pedal foot switch, adjustable tripod, packing bag and
transport case, separate order can be available.
B.OPERATION:
After power on, Press “MODE”button to activate the main menu: Built-in programs mode,
Auto running mode, DMX mode, Slave mode, sound-activited mode.
“SETUP”is to set the relative specification for current mode.
“UP”is to add the value of current specification.
“DOWN”is to decrease the value of current specification.
Built-in programs-- running one of 14 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in
master mode
Sound active mode-- running by sound - activated
four-pedal foot switch: auto run, sound active, freeze, blackout
1. built-in programs mode
Press mode until it shows Prxx, you can select 14 different built-in Programs. press
“SETUP”and “UP”“DOWN”buttons to select the programs (from Pr01 to PG14) and
select the desired program values. When it shows Pr01, press“SETUP”to choose the seven
static color.
When it is Pr02 to Pr14, press “SETUP”and “UP”“DOWN”buttons, you can set the

values for flash(FL00-FL99), fading time(Fd00-Fd99), running speed(SP00-SP99).
When it is Pr13 and Pr14, you can set the background color and running color for this effect,
switch it from 1- -r (background color)to 2- -r(running color) by “SETUP”, adjust different
colors by “UP”“DOWN”.
2. Auto run mode
You can press “MODE”button to select auto run mode, it shows , then it will
run the built-in programs automatically.
Press “SETUP”, it shows n. 001, then you can adjust the running loops number by “UP”
“DOWN”
3. DMX mode
You can control the devices individually via your DMX-controller. Press “MODE”button
until it shows , this means DMX address is 001, you can set the DMX address
by “UP”and“DOWN”buttons. If press “SETUP”button, it will show d-p1 , it means
the device is in which DMX mode 1. You can switch these DMX modes by “UP”and
“DOWN”buttons. There are 7 DMX modes.
DMX value as follows:
DMX mode1：d-P1
CH1
CH2
CH3
R
G
B
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
DMX mode2：d-P2
CH1
CH2
CH3
CH4
R
G
B
Master
dimmer
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
0—255 Light
(0 = OFF)
DMX mode3：d-P3
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
R
G
B
R
G
B
flash
Master
dimmer
0—255
Light
(0 = OFF)
0—255
Light
(0 = OFF)
0—255
Light
(0 = OFF)
0—255
Light
(0 = OFF)
0—255
Light
(0 = OFF)
0—255
Light
(0 = OFF)
0—255
Flash
(0 = OFF)
0—255
Light
(0 = OFF)

DMX mode4：d-P4
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
R
G
B
R
G
B
R
G
B
R
G
B
flash
Master
dimmer
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
0—255
Flash
0 = OFF
0-255
Light
0=OFF
DMX mode5：d-P5
CH1
CH2
NO.
DMX
value
FUNCTION
SPEED
1
0--9
OFF
Value=0 OFF
2
10--19
red
SPEED
0—255
3
20--29
yellow
4
30--39
green
5
40--49
cyan
6
50--59
blue
7
60--69
purple
8
70--79
white
9
80--89
PROGRAM01
10
90--99
PROGRAM02
11
100--109
PROGRAM03
12
110--119
PROGRAM04
13
120--129
PROGRAM05
14
130--139
PROGRAM06
15
140—149
PROGRAM07
16
150--159
PROGRAM08
17
160--169
PROGRAM09
18
170--179
PROGRAM10
19
180--189
PROGRAM11
20
190--199
PROGRAM12
21
200--209
PROGRAM13
22
210--219
PROGRAM14
23
220--229
PROGRAM15
24
230--239
PROGRAM16
23
240--255
Sound Mode
Sensitivity
0--255
DMX mode6：d-P6
CHANNEL
VALUE
FUNCTION
1
000009
010249
250255
Control/Operating Mode
RGB Mode (ch.2-15)
Auto Programms
Sound activated

2
000009
010255
Master dimmer
No function
Dimmer (lowhigh)
3
000009
010255
Strobe
No function
Strobe (slowfast)
4
000255
Red 1
0% 100%
5
000255
Green 1
0% 100%
6
000255
Blue 1
0% 100%
7
000255
Red 2
0% 100%
8
000255
Green 2
0% 100%
9
000255
Blue 2
0% 100%
10
000255
Red 3
0% 100%
11
000255
Green 3
0% 100%
12
000255
Blue 3
0% 100%
13
000255
Red 4
0% 100%
14
000255
Green 4
0% 100%
15
000255
Blue 4
0% 100%
DMX mode 7：d-P7
CH1
CH2
CH3
CH4
CH5
CH6
CH7
R
G
B
NO.
DMX
value
FUNCTION
SPEED
FLASH
Master
dimmer
0-255
Light
0=OFF
0-255
Light
0=OFF
0-255
Light
0=OFF
1
0--9
OFF
NO USE
NO USE
0—255
Light
(0 = OFF)
2
10--19
red
SPEED
0—255
FLASH
0—255
3
20--29
yellow
4
30--39
green
5
40--49
cyan
6
50--59
blue
7
60--69
purple
8
70--79
white
9
80--89
PROGRAM01

10
90--99
PROGRAM02
11
100--109
PROGRAM03
12
110--119
PROGRAM04
13
120--129
PROGRAM05
14
130--139
PROGRAM06
15
140—149
PROGRAM07
16
150--159
PROGRAM08
17
160--169
PROGRAM09
18
170--179
PROGRAM10
19
180--189
PROGRAM11
20
190--199
PROGRAM12
21
200--209
PROGRAM13
22
210--219
PROGRAM14
23
220--229
PROGRAM15
Sensitivity
0--255
4. Slave mode
Press “MODE” button to select SlAv to run the slave mode.
5. Sound active mode
Press “MODE” button to select SU31 to be run, now if activated one time, it will run one step,
adjust the sensitivity by “UP” and “DOWN” buttons.
Sensitivity: SU01-SU31
6. Static color mode
Press “MODE” button to select Colr to be run, press “SETUP”, it will show r255, then you
can adjust the colors by “UP”and“DOWN”buttons.
7. 4-Pedal foot switch
Connect the foot switch to the BAR, then you can control the effect easily by your foot.
Auto run—.run the programs automatically.
Sound active—running the effects by sound activated.
Freeze—freeze the effect which you are running( if you want to run the unit again, please
press auto run or sound active to activate it).
Blackout—the unit will be off.