
8
For the SV300 Wireless Camera system installation, there are two places to install different device
as following figure to watch real-time 2K QHD video streaming in the cabin.
1. Attach one 5 GHz omnidirectional antenna (white) on the N-type port of SV300 Wireless Camera.
2. Attach another 5 GHz omnidirectional antenna (white) on the 90-degree angle antenna transmitter
which is pre-installed on the N-type port of SV300 Wireless Camera.
3. Wipe clean the hook surface of the crane.
4. Attach the SV300 Wireless Camera on the crane’s hook surface magnetically, and then use safety
lanyard to lock it to the crane for safety.
5. Press the power button to turn on the Camera.
SV300 Wireless Camera
Placement
SV300
(Optional) External
PowerBank
Streambox
Monitor
Cabin Block