Scentric AURA 2 GO User manual
USER MANUAL
AURA 2 GO
EMPOWER YOUR SENSES
DEAR USERS
1. Please read the User Guide carefully before use.
2. Please make sure the device has no liquid inside during transportation to prevent
damage or leakage.
3. Please keep the machine upright to prevent leakage and damage.
4. Please do not use a broken power wire. Make sure that the power supply is suitable for
the machine, or it can cause res.
If there are any problems, then please contact us!
PRODUCT DETAILS
Aura 2 Go is suited for small areas. With advanced atomisation technology. It turns the
Pure Aroma Liquid into a mist. Along with the airow, the fragrance will disperse in the
area. The set up for the concentration and timer can be adjusted according to different
requirements.
1. Touch Power Button
2. Mist Outlet
3. Nebulizing Spray Head
4. Type C Jack
5. Built-in Battery
6. Main Body
7. Pure Aroma Liquid Bottle
8. Indicating Light
9. Lock
10. Base
11. USB Cable (Type C)
1
8
9
2
3
4
5
6
11
10
7
OPERATION
Place the product on a at surface
and remove the spray head from the
base anticlockwise.
Install the bottle lled with the liquid
into the spray head.
Press the center of the device head to
turn the device on.
Place the spray head back into the
body and turn it clockwise to close
and lock the device.
1
STEP
2
STEP
3
STEP
4
STEP
Table of contents
Other Scentric Accessories manuals
