Sceptre SC7M41 Manual
15
User’s
Chapter 3:BIOS
This Main Menu can display all the major option’s setting and the users
are allowed to set any option as he prefers.Take the setting of “Standard
CMOS Features” for example. The setting steps are:
(1)Shift to the item you want.
(2)Press <Enter>, a menu will immediately popping up on your screen.
(3)Move to the item such as “Drive A” and press <Enter>.
(4)Pressing <PageUp> or <PageDown> key, you will see such as EGA/
VGA, CGA 40, CGA 80, MONO.
(5)Shift to the item you want to set and press <Enter>.
(6)Press <Esc> to return to Main Menu.
(7)Shift to <SAVE & EXIT SETUP> and press <Enter>.
(8)Choose <Y> to save the data you renewded and Reboot.
Thus you will be able to load your new settings.
3.1 CMOS Setup Utility
16
User’s
The options :1.44M,3.5 in.(Default) , None , 360K,5.25in. ,
720K,3.5in. , 2.88M,3.5in.
BB
BB
BVideo:
The options : EGA/VGA(Default), CGA/40, CGA 80, MONO.
BB
BB
BHalt On:
The options :All Errors(Default), No Errors, All, But
Keyboards, All, But Keyboard, All,But Diskette, All,But Disk/
Key.
3.2 Standard CMOS SETUP
BB
BB
BDate/Time
The options are used to set the correct date and time.
BB
BB
BPrimary/Secondary Master/Slave
The options :Auto,Normal,LBA,LARGE.
BB
BB
BDrive A/B:
Other manuals for SC7M41
1
Table of contents
Other Sceptre Motherboard manuals
