Sceptre Dello I User manual

DELLO I
DELLO IDELLO I
DELLO I（
（（
（32.5”W x 17” D x 24” H）
））
）
Assembly Instruction
1 Use two screws (F) to attach bottom panel
(D) to back panel (B)
2 Use four screws (F) to attach bottom
panel to side panel (C)
3 Insert two metal pegs (G) into Top anel
(A)
4 Insert four wooden dowels (H) on top
of side leg and peg lock (G) into back
of side legs as shown on Step 5
5
Insert peg lock (G) into back of side legs.
Turn clockwise until tight as shown on the
right diagram
Turn clockwise until tight

DELLO I
DELLO IDELLO I
DELLO I（
（（
（32.5”W x 17” D x 24” H）
））
）
Assembly Instruction
6 Use two screws (F) to attach top panel to
back panel
7 Slide glass shelf (E) into precut shelf
guide on the side legs and back panel
8 Your Dello I stand is now finished and should resemble the image below

DE O I （
（（
（32.5”W x 17” D x 24” H）
））
）
Assembly Instruction
Item Name Spec Qty Remarks
A Top anel MDF 1
B Back anel MDF 1
C Side Leg MDF 2
D Bottom anel MDF 1
E Glass Shelf 1
F Screw M5×19 8
G Metal eg & eg
Lock
2
H Wooden Dowel 4
I Screw Insert M8
×40
8 re-install
J Rubber feet 4 re-install
K Small Screw M4
×19
4 re-install