Schaub Lorenz DVD-1066TNT User manual

Please read and keep these instructions
DVD-1066TNT
USER MANUAL
DVD PLAYER WITH BUILT- IN DVB-T
USB WITH RECORDING FUNCTION

Important safety instructions-please read carefully
And keeps for future reference
To reduce the risk of fire or electric shock, do not expose this product to
water, rain or moisture. To prevent the risk of electric shock, do not remove
the cover or back or this product. In case of product failure, only qualified
personnel can repair. There are no user-serviceable parts inside.
CAUTION !
Dangerous tension inside the product ! Do not open. Risk of electric shock ! No parts
can be repaired by the end-user. Only qualified personnel can repair and maintain
this product.
If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-
sales personnel in order to avoid any danger.
The product must be installed in accordance with local laws.
Damaged batteries must be properly disposed. In order to protect the environment, please
dispose the batteries properly, in accordance with local laws (information is available at
your reseller).
This appliance is to be used on temperate climate. Don’t use the apparatus in tropical
climates.
Where to install the product
- Place the product on a straight, rigid and stable place. Do not place the product on a
carpet.
- Do not place the product on top or another that may cause overheating (for example, a
receiver or amplifier).
- Do not place anything underneath the product (for example, CDs or magazines).
Proper ventilation
- Place the product in a sufficiently-aerated place to avoid overheating. Allow at least
10cm spacing at the back and top of the product, and 5cm spacing on both sides to
prevent overheating.
- Do not place items such as newspapers, tablecloth, curtains, in front or the ventilating
openings.
Do not expose the product to high temperatures, moisture, water and dust.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus
- Do not place other items close to this product that may damage it (for example, an object
containing water or lightened candles).
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
Use of controls, adjustments, or performance of procedures other than
those specified herein may result in dangerous radiation exposure. This
product is rated as LASER CLASS 1 PRODUCT.
CAUTION: Laser radiation when open - never stare into the laser beam.

- This logo set on the product means that the recycling of this apparatus comes within the
framework of the directive 2002/96/EC of January 27, 2003 concerning the waste on
electrical and electronic equipment (WEEE).
- The presence of dangerous substances in the electrical and electronic equipments can
have potential consequences on the environment and human health in the cycle of
reprocessing this product.
- Therefore, at the end of its lifetime, this product shall not be disposed with other non-
recycled waste.
- As the end user, your role is of prime importance in the cycles of re-using, recycling, and
other forms of valorization of this electrical and electronic equipment. Local authorities
and resellers have set special procedures for the purpose of collecting and recycling this
product.
- You have the obligation to use the selective waste collection systems put in place by
your local authorities.
DVD Compatibility
This product can only play ZONE 2 DVD.
This product is compliant with directives 2006/95/EC (abrogating the directive
73/23/EEC modified by the directive 93/68/EEC) and 2004/108/EC
(Abrogating the directive 89/336EEC).
Electric supply
- Please unplug the product in case of prolonged non-use.
- This product is intended to be used under temperate climate and should not be used
under tropical climate.
- If the supply cable is damaged, it must be replaced by the manufacturer or qualified
after-sales personnel to avoid any danger.
- This product must be connected to an electrical supply 230V ~ 50Hz.
- The plug must be accessible after installation.

Table of Contents
1. Presentation 1
2. Front Panel and Rear Panel 2
3. Quick Installation Guide for First Use 3-5
4. Remote Controller 6
6. System Setup 8-9
5. Connections 7
7. DVD Setup
8. Initial Installation Instructions
9-10
11
9.DVB Menu
10. Program Search
14. Recording a DVB-T Program
11-12
12-13
16-19
11.Parental Control
15. Record List
12. System Setup
16. Troubleshooting
13
19
13-14
20-21
13. Main operations in DVB-T mode
17.Technical Specification
14-15
22

1
1. Presentation
Thank you for having purchased this DVD player with built-in DVB-T tuner. This unit
allows you to receive all free DVB-T channels broadcast in MPEG-2 format. Simply
press the DVD button on the remote control in order to switch to DVD mode and
watch your favorite movies.
This unit can also serve as an authentic multimedia station thanks to its USB port:
- Plug a USB stick to the unit and you may start recording a DVB-T channel by
simply pressing the REC button on the remote control! You may also program a
recording in advance by using the TIMER function, just as you can do with a
recorder.
- With this unit, you can also watch your MPEG-4 and DIVX6 videos, play MP3 and
WMA music files, and visualize your JPEG photo albums.
Other features of this product:
- The installation of the unit is quick and easy. Simply connect it to your roof
antenna (via the RF IN antenna input) and then connect it to your television by
using an SCART cable. At first use, the installation of DVB-T channels will take
place automatically.
- Thanks to the coaxial output, you may enjoy better audio quality by connecting
this unit to your home cinema system!
- The EPG function allows you to easily consult, at all time, the coming programs of
the DVB-T channels (subject to the information broadcast by the channels).
Package Contents
Before installation, please check the items of the package.
The package should contain the following items:
~ DVD player with built- in DVB-T
~ Remote Controller x1
~ User's Manual x1
Auto Standby
In order to save energy, the electricity consumption of this product has been reduced
in both operation mode and standby mode. Furthermore, if no operation is carried
out for three consecutive hours, the unit will automatically enter standby mode.
Simply press the Standby button on the remote control to switch the unit back to
operation mode.

2. Front Panel and Rear Panel
2
Front Panel
Rear panel
1
1.OPEN/CLOSE
2.PLAY/PAUSE
3.STOP
4.SOURCE
5.USB
6.DISC TRAY
7.STATUS INDICATOR
8.LED DISPLAY
9.REMOTE CONTROL SENSOR
10.POWER SWITCH
1. SCART OUT: This socket connects to your TV.
2. COAXIAL: This socket connects to a coaxial socket on your home theater.
3. RF IN : This socket connects to your external aerial.
4. RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or another video
system.
1
2 3 4
5678910
2 3 4
Status indicator of the unit:
- The indicator lights in red when the unit is in standby mode or when recording is in progress.
- The indicator lights in green when the unit is switched on.

3
3. Quick Installation Guide for First Use
Second step: Prepare the remote control
Insert two AAA batteries inside the remote control (batteries not included).
Third step: Initial Installation Instructions
System first asks user whether to perform initial installation, select "YES" to
continue or "NO"to quit initial installation interface; user can use direction buttons to
select country/region and OSD language, and then select "NEXT" to access or
"BACK" to return , system asks user whether to start auto scanning, select" YES" to
access to activate system to start auto scanning and save scan information upon
completion and then play the first channel, select "NO" to quit scanning and exit
initial installation menu, or select "BACK" to return.
First Time Installation
Do you want to start first time
Installation wizard?
NoYes
(1) First step: Connect the unit with your roof antenna
Connect your home antenna with the unit's input “ RF IN"
(2) Second step: Connect the unit with your
television
Use a scart cable to connect the unit's "SCART OUT"
output to the scart input of your television.
(The antenna cable is not provided)
(The scart cable is not provided)

4
- In case the first auto-installation message is not shown, or if you skip it, please
press SETUP from the remote control, then you can launch installation via
TV>Program Search>Automatic Search.
Important Remarks:
(1) Analog Reception and DVB-T Reception
When you wish to watch TV using your TV tuner (analog tuner) and that your DVB-
Tunit has been turned off or unplugged, the image quality can be deteriorated
according to the TV you are using. This is normal, your DVB-T unit must be set in
standby mode to allow a good quality signal.
(2) Different volume levels between channels in AC3 format and those in stereo
format.
Certain DVB-T programs may be broadcasted in AC3 format, which provides a superior
audio quality via the coaxial output from the receiver. If you chose the AC3 format and
switch to a channel in stereo format afterwards, the audio volume may increase
depending on the DVB-T program format and your home theatre equipment. This is
normal; in this case, consider reducing the volume prior to changing channels to avoid
listening gene.
(3) If the reception problem still occurs.
Your unit has been tested for optimal performance over all the country. In most
cases, the DVB-T reception problems are due to a weakness in your home's
antenna installation. If your installation is old, or has never been tested for DVB-T,
the signal can be too weak or flawed for the unit to work properly. It is therefore
highly recommended that you ask for a qualified technician to test the compliance
of your home antenna. This unit has been designed and is guaranteed to work
with a signal of at least 60dB.
First Time Installation(2)
Do you want to start
Auto search ? Previous channel list
will be replaced.
Back NoYes

Good to know - Main Functions of your Remote Control
Menu Navigation
- Use the MENU button to change the unit's configuration. You can also define your
favorite channel lists, which will be directly accessible by using the FAV button on the
remote control.
- To exit a menu or a sub-menu, press the EXIT button on the remote control to return
to the previous screen.
Television Program Guide
- Press the EPG button to view the electronic TV guide of DVB-T channels. (such
information is provided by the channels and may not always be available). Press the
EXIT button to quit the EPG menu.
Sound Mode and Audio Language Selection
- Press the AUDIO button to:
o Change the sound mode (choose "Stereo" if you use the sound output from the
television, or "AC3" if you have connected your home theatre to the unit with a
coaxial cable);
o Change the audio track to another language if this option is available on the
current DVB-T channel.
Multimedia functions
- Press the REC button to begin recording of the currently viewed channel on the USB
support inserted in the unit. Press the STOP button to stop recording.
- To schedule a recording, press TIMER. You can choose the channel, the start time
and duration of the recording.
- To view your recordings, a single button: VIEW REC.
- Allows you to view all multimedia content of the USB key inserted (JPEG photos,
MP3 music and MPEG4 videos), press the USB button.
Switching between the DVD/DVB-T/Multimedia functions
- Press the TNT button on the remote control to switch to DVB-T mode.
- Press the DVD button in order to play DVDs.
- Press the USB button to display all the multimedia files on your USB stick and use
the VIEW REC button to display all the recorded files present on the USB stick.
Note:The recording function is only available in DVB-T mode. It is not possible to make
any recording in DVD mode.
5

4. Remote Controller
6
1.STANDBY:Switch the receiver in and out of standby mode.
2.NUMBER KEYS: Used to select channel numbers or input
numbers in menus.
3.GOTO:To select your desired time, chapter of the disc to
play.
4.MENU DVD:During DVD playback , press MENU DVD to
display the disc menu of the current title.
5.SETUP:Press the button to enter the system setting menu,
press the button again to exit the menu.
6/25.CH+/CH-:Program changing keys.
7.ENTER:To confirm current setting, or display all programs in
no-menu mode.
8/24.VOL-/ VOL+:To increase / decrease volume. Change
date of EPG.
9.REV/ FWD: To fast forward/rewind the playback.
10.TIMER:Press "TIMER" button to enter the setup menu of
time recorder.
11.STOP:
(1).Stop playing USB Media.
(2).stop recording.
12. PLAY/PAUSE: To freeze the current image, and then to
resume viewing.
13.TTX:Used to open teletext OSD display if teletext available
in the broadcasted stream.
14.FAVORITE:Used to access your favorite channels.
15.COLOR KEYS(RED/GREEN/YELLOW/BLUE):These
buttons are used to navigate teletext pages.
16.OPEN/CLOSE:To open the disc tray, press OPEN/CLOSE;
To close the disc tray, press OPEN/CLOSE again.
17.TNT:Press the key to access DVB-T mode directly.
18.DVD:Press the key to access to DVD mode dorectly.
19.USB:Allows you to display all multimedia content of the
USB key inserted in the device.
20.TITLE:Press the button to enter the appointed title.
21.VIEW REC:To access the list of your recordings and to
view the chosen recording.
22.EXIT:Use this key to quit current menu.
23.MUTE:Used to turn the sound on or off.
26.PREV/NEXT: To read the previous or next file of the USB
key.
27.EPG:Shows the Electronic Program Guide.
28.REC:Press “REC" button to record to USB.
29.STEP:Press the key ,you can play the disc step by step , in
this way, you can catch any picture on the disc .Press play
button to play normally.
30.SUB-T:Used to switch between different subtitles that are
broadcasted.
31.AUDIO:Used to set the sound output, the available
settings are STEREO,LEFT,RIGHT.
32.INFO TNT: In DVB-T mode only, the program name, the
signal quality and strength.
1
2
5
4
7
6
9
10
11
12
14
30
29
28
27
26
23
22
19
18
17
16
15
13
32
31
3
21
20
8
24
25