SCHUNK iTENDO2 easy connect User instructions

Assembly and Operating Manual
iTENDO² easy monitor
ID 1516313
Translation of Original Operating
Manual

Imprint
2 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
Imprint
Copyright:
This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights
reserved.
Technical changes:
We reserve the right to make alterations for the purpose of technical improvement.
Document number: 1547510
Version: 01.00|05/04/2023|en
Dear Customer,
Thank you for trusting our products and our family-owned company, the leading technology
supplier of robots and production machines.
Our team is always available to answer any questions on this product and other solutions. Ask
us questions and challenge us. We will find a solution!
Best regards,
Your SCHUNK team
Customer Management
Tel. [phone]
Fax [phone]
[e-mail]
Please read the operating manual in full and keep it close to the product.

Table of contents
01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510 3
Table of Contents
1 General ............................................................................................. 5
1.1 About this manual............................................................................... 5
1.1.1 Presentation of Warning Labels ..................................................... 5
1.1.2 Definition of Terms ..................................................................... 6
1.1.3 Applicable documents ................................................................. 6
1.2 Warranty ........................................................................................... 6
1.3 Scope of delivery................................................................................. 6
1.4 Prerequisites ...................................................................................... 6
2 Basic safety notes ................................................................................ 7
2.1 Product safety .................................................................................... 7
2.2 Intended use...................................................................................... 7
2.3 Inappropriate use ............................................................................... 7
2.4 Constructional changes......................................................................... 7
2.5 Spare parts ........................................................................................ 8
2.6 Environmental and operating conditions.................................................. 8
2.7 Personnel qualification ........................................................................ 8
2.8 Obligations of the operator ................................................................... 9
2.9 Personal protective equipment .............................................................. 9
2.10 Notes on safe operation........................................................................ 10
2.11 Transport........................................................................................... 10
2.12 Malfunctions ...................................................................................... 11
2.13 Maintenance...................................................................................... 11
2.14 Disposal ............................................................................................ 12
2.15 Fundamental dangers .......................................................................... 12
2.15.1 Protection during handling and assembly ....................................... 12
2.15.2 Protection during commissioning and operation ............................... 12
3 iTENDO² easy monitor ............................................................................ 13
4 iTENDO² Connect Box.............................................................................. 14
5 iTENDO² app with easy monitor ................................................................ 15
5.1 Basic information................................................................................ 15
5.2 Setting up the iTENDO² tablet ................................................................. 15
5.3 Opening and closing the iTENDO² app....................................................... 15
5.4 Update from easy connect to easy monitor ............................................... 16
5.5 Creating screenshots ............................................................................ 17
5.6 Operating the iTENDO² app with easy connect ............................................ 17
5.6.1 Design and description of the iTENDO² app with easy monitor .............. 18
5.6.2 Connecting/disconnecting the iTENDO² Wireless Receiver ..................... 20

Table of contents
4 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
5.6.3 Display modes of the iTENDO² app with easy monitor ......................... 22
6 Troubleshooting................................................................................... 38
7 Spare parts list .................................................................................... 40
8 Disposal ............................................................................................. 42

General
01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510 5
1 General
1.1 About this manual
This manual contains important information for a safe and
appropriate use of the product.
This manual is an integral part of the product and must be kept
accessible for the personnel at all times.
Before starting work, the personnel must have read and
understood this operating manual. Prerequisite for safe working
is the observance of all safety instructions in this manual.
In addition to these instructions, the documents listed
under }1.1.3 [/6] are applicable.
NOTE: The illustrations in this manual are intended to provide a
basic understanding and may deviate from the actual version.
1.1.1 Presentation of Warning Labels
To make risks clear, the following signal words and symbols are
used for safety notes.
DANGER
Dangers for persons!
Non-observance will inevitably cause irreversible injury or death.
WARNING
Dangers for persons!
Non-observance can lead to irreversible injury and even death.
CAUTION
Dangers for persons!
Non-observance can cause minor injuries.
NOTICE
Material damage!
Information about avoiding material damage.

General
6 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
1.1.2 Definition of Terms
In this manual, "product" replaces the product designation on
the title page and refers to the complete system with all the
individual components.
1.1.3 Applicable documents
lGeneral terms of business *
lContractual agreements
lAssembly and Operating Manual iTENDO² (ID 1522399)
lAssembly and Operating Manual iTENDO² pad (ID 1494155)
lAssembly and Operating Manual iTENDO² easy connect (ID
1539948)
lDocuments of the individual components
The documents labeled with an asterisk (*) can be downloaded
from schunk.com.
1.2 Warranty
If the product is used as intended, the warranty is valid for 12
months from the ex-works delivery date under the following
conditions:
lObserve the applicable documents, }1.1.3 [/6]
lObserve the ambient conditions and operating
conditions, }2.6 [/8]
lObserve the specified maintenance instructions.
This does not include special agreements regarding the warranty
and wearing parts.
1.3 Scope of delivery
The scope of delivery includes
1 iTENDO² easy monitor (ID 1516313)
1 Activation code for iTENDO² easy monitor
1 Assembly and Operating Manual (ID 1547510)
1.4 Prerequisites
To use the product, the following products are necessary:
1iTENDO² easy connect system

Basic safety notes
01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510 7
2 Basic safety notes
2.1 Product safety
The product represents the state of the art and the recognized
safety rules. However, the product can pose hazards if, for
example:
lThe product is not used as intended.
lThe product is not installed, maintained, stored or
transported properly.
lThe safety and installation instructions in this manual are not
followed.
Avoid any manner of working that could interfere with the
function and operational safety of the product.
2.2 Intended use
lThe product is solely intended for use in machine tools to
record process data from the iTENDO² used.
lThe Wireless Receiver may only be connected to an iTENDO²
and the iTENDO² Connect Box or the iTENDO² app.
lThe product may only be installed and used within the scope
of the information in the technical data.
lThe product is intended for industrial use.
lAppropriate use of the product includes compliance with all
instructions in this manual.
2.3 Inappropriate use
The product is not being used as intended if, for example:
lThe information in the technical data is not observed when
using and operating the product.
lThe product is operated in corrosive media.
lThe maintenance and storage specifications are not complied
with.
2.4 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of
the product or damage it.
lStructural changes should only be made with the written
approval of SCHUNK.

Basic safety notes
8 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
2.5 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
lUse only original spare parts or spares authorized by SCHUNK.
2.6 Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the
product unsafe, leading to the risk of serious injuries,
considerable material damage and/or a significant reduction to
the product's life span.
2.7 Personnel qualification
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
lAll work may only be performed by qualified personnel.
lBefore working with the product, the personnel must have
read and understood the complete assembly and operating
manual.
lObserve the national safety regulations and rules and general
safety instructions.
The following personal qualifications are necessary for the
various activities related to the product:
Trained electrician Due to their technical training, knowledge and experience,
trained electricians are able to work on electrical systems,
recognize and avoid possible dangers and know the relevant
standards and regulations.
Qualified personnel Due to its technical training, knowledge and experience,
qualified personnel is able to perform the delegated tasks,
recognize and avoid possible dangers and knows the relevant
standards and regulations.
Instructed person Instructed persons were instructed by the operator about the
delegated tasks and possible dangers due to improper behaviour.
Service personnel of
the manufacturer
Due to its technical training, knowledge and experience, service
personnel of the manufacturer is able to perform the delegated
tasks and to recognize and avoid possible dangers.

Basic safety notes
01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510 9
2.8 Obligations of the operator
The operator must ensure that:
lThe product is only used as intended.
lThe product is only operated in a perfect and fully functional
status.
lThe correct functioning of the product is checked regularly.
lThe operating manual is always kept in a complete and
legible condition close to the product.
lThe product may only be operated and maintained by
sufficiently qualified and authorized personnel.
lThe personnel is familiar with the contents of the operating
manual, in particular the safety notes contained therein.
lThe personnel are regularly instructed in occupational safety
and environmental protection.
2.9 Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
lWhen working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
lObserve the valid safety and accident prevention regulations.
lWear protective gloves to guard against sharp edges and
corners or rough surfaces.
lWear heat-resistant protective gloves when handling hot
surfaces.
lWear protective gloves and safety goggles when handling
hazardous substances.
lWear close-fitting protective clothing and also wear long hair
in a hairnet when dealing with moving components.

Basic safety notes
10 01.00 | iTENDO² easy monitor | Assembly and Operating Manual | en | 1547510
2.10 Notes on safe operation
Incorrect handling of the personnel
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
lAvoid any manner of working that may interfere with the
function and operational safety of the product.
lUse the product as intended.
lObserve the safety notes and assembly instructions.
lDo not expose the product to any corrosive media. This does
not apply to products that are designed for special
environments.
lEliminate any malfunction immediately.
lObserve the care and maintenance instructions.
lObserve the current safety, accident prevention and
environmental protection regulations regarding the product's
application field.
2.11 Transport
Handling during transport
Incorrect handling during transport may impair the product's
safety and cause serious injuries and considerable material
damage.
lWhen handling heavy weights, use lifting equipment to lift
the product and transport it by appropriate means.
lSecure the product against falling during transportation and
handling.
lStand clear of suspended loads.
To prevent damage to the product during transport, the following
must be observed:
lProtect the product from penetrating humidity (e.g. with
suitable packaging).
lThe ambient conditions specified in the technical data must
be observed.
lThe product must be protected from vibrations and impacts.