Schweigen IN10EB User manual
.........................................................................................................................................................
.........................................................................................................................................................
.........................................................................................................................................................
>> INSTRUCTION MANUAL
IN10EB
BUILT-IN ELECTRIC OVEN
IN10EB (10203.3TtyDdSoLcVoQSm)
(06.2017 / V1.0)
Installation / Operation / Maintenance
built-in oven/60cm
Page 2
.........................................................................................................................................................
.........................................................................................................................................................
>> WELCOME
Thank you for purchasing this Schweigen
IN appliance.
To achieve the optimal performance from
your appliance, and to avoid the risk of
accident or damage, it is essential to read
time use.
This guide contains important information
on the use and maintenance of the
appliance, as well as important safety
notes.
Your appliance has been thoroughly
checked for safety and functionality
before being packaged and leaving the
manufacturer.
Please keep this instruction manual
in a safe place so you can refer to it at
any time.
IMPORTANT!
This appliance should only be operated when
you have read and understood this manual
thoroughly.
The appliance can be only used for the
purpose for which it was designed. Any other
use (eg. heating) is deemed improper and
can be dangerous.
Installation, regulation or maintenance of
gas and electrical appliances must only be
professional, familiar with all Australian
Appliance Industry regulations.
Upon collection or delivery of the appliance,
any damage or defects must be reported
within 48 hours to your retailer or
Schweigen Customer Service, in order
to recognise any claim.
The manufacturer reserves the right to
operation of the appliance, at any time.
Page 3
.........................................................................................................................................................
.........................................................................................................................................................
>> PACKAGING AND DISPOSAL OF THE APPLIANCE
During transportation, protective packaging was
used to protect the appliance against any damage.
After unpacking, please dispose of all elements of
packaging in a way that will not cause damage to
the environment.
All materials used for packaging the appliance are
environmentally friendly; they are 100% recyclable
and are marked with the appropriate symbol.
Caution! All packaging materials (polythene bags,
polystyrene pieces, etc.) must be kept out of reach
of children.
Old appliances should not be disposed of with
normal household waste. They must be delivered
to a recycling centre for electric and electronic
equipment. A symbol shown on the product, the
instruction manual or the packaging shows if it is
suitable for recycling.
Materials used inside the appliance are recyclable
and are labelled with information concerning this.
By recycling materials or other parts from used
to the protection of our environment.
Information on appropriate disposal centres for
used devices can be provided by your local council
authority.
Page 4
.........................................................................................................................................................
.........................................................................................................................................................
>> TABLE OF CONTENTS
Packaging and disposal of the appliance ............................................................................................. 3
Description of the appliance.................................................................................................................. 5
Control panel............................................................................................................................................. 6
Safety instructions for use..................................................................................................................... 7
How to save energy.................................................................................................................................8
Operation ..................................................................................................................................................8
Practical hints .........................................................................................................................................21
Cleaning and maintenance...................................................................................................................23
Installation instructions .......................................................................................................................28
Troubleshooting.....................................................................................................................................31
.........................................................................................................33
Page 5
.........................................................................................................................................................
.........................................................................................................................................................
>> DESCRIPTION OF THE APPLIANCE
1– Oven function selector dial
2– Control panel
3– Temperature/Selection dial
4– Oven door handle
1 2 3
4
Baking tray
Roasting tray
Wire rack Meat probe
2x Side racks
2 pairs telescopic runners
Accessories:
Page 6
.........................................................................................................................................................
.........................................................................................................................................................
>> CONTROL PANEL
Oven functions
Time and function
indication Temperature
Touch controls
Page 7
.........................................................................................................................................................
.........................................................................................................................................................
>> SAFETY INSTRUCTIONS FOR USE
WARNING: This appliance is not intended for
use by person (including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
WARNING: During use the appliance becomes hot.
Care should be taken to avoid touching heating
elements inside the oven. Accessible parts may
become hot during use. Young children should be
kept away.
WARNING: Do not use harsh abrasive cleaners or
sharp metal scrapers to clean the oven door glass
since they can scratch the surface, which may
result in shattering of the glass.
WARNING: Ensure that the appliance is switched
possibility of electric shock.
You should not use steam cleaning devices to
clean the appliance.
Only use the meat probe supplied with this
oven.
Danger of burns! Hot steam will escape the oven
when the door is opened during or after cooking,
please use caution. DO NOT lean over the door
when you open it. Please note that depending on
the temperature, the steam, may not be visible.
• Ensure any small items of household equipment,
including connection leads, do not touch the hot
oven as the insulation material of this equipment
is usually not resistant to high temperatures.
• Do not rest any cooking equipment on the
opened door of the oven.
• Do not put pans on the opened door of the oven.
• Do not use the oven in the event of a technical
• In the event of any incident caused by a technical
fault, disconnect the power and report the fault
to the service centre to be repaired.
• The instructions and provisions contained in this
instruction manual should be strictly observed.
Do not allow anybody who is not familiar with
the contents of this instruction manual to
operate the oven.
• The appliance has been designed only for
cooking. Any other use (for example heating)
may be dangerous. Any damage incurred as a
result of improper use will not be covered by
warranty.
Page 8
>> OPERATION
BEFORE USING THE APPLIANCE FOR THE
FIRST TIME
• Remove packaging and clean the interior
of the oven.
• Take out and wash the oven accessories with
warm water and a little washing-up liquid,
• Heat up the oven, to a temperature of 250°C for
approximately 30 minutes, remove any stains
and wipe over the interior carefully.
IMPORTANT
To clean the oven chamber use only warm water
and a small amount of washing-up liquid.
The oven features a touch control panel and display.
To activate each function, touch the sensor. An
acoustic signal will be heard.
Touch sensor surfaces must be kept clean.
This model is equipped with a lit oven door handle.
Oven handle light is turned on during operation
and acts as oven cavity residual heat indicator,
oven cavity drops below 50°C. The light is on when
over temperature is above 50°C and light intensity
temperature inside the oven cavity the higher the
light intensity.
......................................................................
......................................................................
>> HOW TO SAVE ENERGY
Responsible energy use not only saves money but
also helps the environment. So let’s save energy!
And this is how you can do it:
• Do not open the oven door unnecessarily.
• Only use the oven when cooking larger
dishes. Meat up to 1 kg can be prepared
more economically in a pan on the stove top.
• Make use of residual heat from the oven.
If the cooking time is greater than 40 minutes
end time.
• When using the timer you may set shorter
cooking times according to the dish being
prepared, to save energy.
• Make sure the oven door is properly closed.
Heat can leak through damaged door seals.
• Do not install the cooker in the direct
vicinity of refrigerators/freezers. Energy
consumption may increase unnecessarily.
......................................................................
......................................................................
Page 9
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
USING THE CONTROL PANEL
TOUCH CONTROLS
The control panel features 5 touch sensors (no backlight), as shown above. Each time you touch a sensor
a beep is emitted (except as indicated in detailed operating instructions). Depending on which setting is selected
The appliance generates the following beeps:
0(2 short fast beeps)
clock settings
kitchen timer, duration,
delay start settings
oven cavity and meat probe
temperature settings
Page 10
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
CONTROL PANEL Continued
Time and function indication
The displayed functions and symbols.
ECO mode
Kitchen timer
End Time
Duration
Steam Cleaning
Fast heat-up
Child lock active
Temperature
Oven cavity temperature and heating indicator.
Meat probe and activation indicator
Start Time/ End Time and activation indicator
(timer).
Page 11
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
OVEN FUNCTION DIAL
Depending on the model, the function selector
dial features 11 positions. Each position is an oven
pictogram displayed on the screen.
TEMPERATURE/SETTING SELECTION DIAL
Turn left / right to set the temperature or time.
increase/decrease by larger increments
Position Display Symbol Function
Fan with ring element
Bottom element (crisping)
Grill element
Defrosting
Cleaning
Page 12
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
TURN ON THE OVEN AND SET THE TIME
be set for the appliance to operate. Otherwise the
beep will be emitted. You must set the current time
.
The clock shows 24-hour or AM/PM time. Touch
and hold for 3 seconds to set the time. You will
SETTING THE TIME
Use the Temperature/Setting selection dial to
change the time mode.
Touch
Use the Temperature/Setting selection dial
to set the hour 00–23, or 01–12 AM, 01–12 PM
depending on the time mode. The hour digits will
Touch
you can now set the minutes.
Use the Temperature/Setting selection dial
to set the minutes. Touch
clock will show the current time.
nothing for 5 seconds when setting the time, the
be set to the last setting entered by the user.
STANDBY MODE
The oven enters the standby mode. You can use
oven functions.
In standby mode, the display intensity is set to low
and the following will be displayed:
• Clock
• Symbols of the active functions: oven cavity
residual temperature, child lock, kitchen timer,
door lock.
When you touch any controls the appliance will
enter the operating mode. Display light intensity
will increase to high.
TURNING OFF THE OVEN
function selector dial
to 0.
IMPORTANT
In the event of a power outage all set functions,
automatic programmes, set temperatures and
timer are cleared.
Page 13
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
CHILD LOCK
Child lock is designed to prevent children from
changing the oven settings. Once the child lock
is activated the oven stops responding to any
controls except the unlocking combination.
To activate the child lock
Touch and hold , and turn Temperature/Setting
selection dial towards [+
will be displayed.
To deactivate the child lock
Touch and hold , and turn Temperature/Setting
selection dial towards [-
beep and the child lock symbol will be removed.
FUNCTION
When the ECO function is active the appliance turns
and uses residual heat to continue cooking. This
function is designed to save energy.
ECO function is activated / deactivated automatically
PROBE functions. The indicator will be displayed
when in use.
Page 14
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
MEAT PROBE
When you connect the meat probe, in each
function selector dial position, except
CLEANING and 0, the displays shows and
the set temperature (80°C by default).
meat probe is detected. Now you can set the meat
core temperature to be achieved when elements
core temperature. Touch once to set oven cavity
temperature. Meat probe core temperature
Temperature/Setting
selection dial to adjust it in the range 30°C –
99°C. Touch
within 5 seconds the current temperature setting
is accepted.
When using the meat probe, is active and the
desired temperature to continue cooking with
residual heat. Cooking time ends 5 minutes after
is emitted and the meat probe core temperature
and the
the alarm or wait 1 minute. If you do nothing, the
appliance will enter standby. Touch twice and
increase temperature to continue cooking.
The meat probe symbol and core temperature
ingredients go out when you unplug the meat
probe is unplugged. You will not hear any beeps if
the oven is set to 0.
function
selector dial to position 1 with the meat probe
plugged in, the display will show the current
residual heat temperature, the meat probe symbol
and core temperature are not displayed.
Recommended meat probe
temperature settings
Type of meat Temperature (°C)
Pork 85 - 90
Beef 80 - 85
Veal 75 - 80
Lamb 80 - 85
Venison 80 - 85
IMPORTANT
Only use the meat probe supplied with this oven.
Page 15
FAST OVEN CAVITY HEATUP
Use fast oven cavity heat-up to quickly reach the
desired temperature. This feature is available in
all function settings except DEFROST, CLEANING
and 0.
When you touch in the settings, you will hear
the elements
will be turned on and the appliance operates at
the maximum power to quickly achieve the set
temperature. FAST HEAT-UP symbol is shown
on the screen.
temperature is reached. Touch to deactivate
LIGHT
The light turns on when:
• The function selector dial is set to any cooking
function (other than 0).
• The oven door is open.
• If you touch
• Automatically after 30 seconds or after
10 minutes when oven door is open.
• 30 seconds after the oven door is closed if
function selector dial is set to a cooking
function (other than 0).
• When you close the door and function selector
dial is set to 0.
• When you touch
• When you set the function selector dial to 0,
and the door is closed.
You can turn on the light permanently during
the heating function. Touch and hold for 3
be on permanently when you turn the function
selector dial to 0.
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
Page 16
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
HEATING FUNCTIONS
Turn the function selector dial to set the heating
function. The function selector dial features
10 heating functions and OFF (0setting).
Function selector dial positions
POSITION 0
You cannot use the and functions.
emitted.
Clock
the oven by setting the function selector dial
to 0 the display will show current oven cavity
temperature (Temperature is displayed, if it is
higher than 60°C). No oven functions are displayed.
POSITIONS 1–10
Please refer to the table on the next page for
details on how the oven operates when you set
the function selector dial to individual heating
functions
Setting the heating temperature
Each heating function has an associated default
temperature. To adjust it at any time in the range
0-280°C touch and use the Temperature/
Setting selection dial to make the adjustment.
No adjustment is allowed in CLEANING and
DEFROST functions. Once adjusted, this will be the
new set temperature. If you touch and do nothing
for 5 seconds, you will not be able to adjust the
temperature. You need to touch the sensor again.
The symbol is shown when the thermostat
turns on any of the elements.
Opening the door during operation
If you open the oven door while any of the heating
functions are activated, the fan and elements will
longer than 30 seconds, you will hear a 15-second
Page 17
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
Default Temperature Setting
Dial
setting
Display
indication
Oven functions Default setting
Fan with ring element
Bottom element (crisping)
Grill element
Defrosting Level 3
Cleaning
CLEANING FUNCTION
CLEANING is the last function on the selector
dial position.
This appliance is a standard enamel oven.
Insert the baking tray on the lowest level and pour
250ml (one glass) of water into it.
The cleaning starts 3 seconds after setting the
Duration countdown will be displayed. The appliance
Page 18
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
SETTING KITCHEN TIMER, DURATION,
DELAY START.
Touch to use KITCHEN TIMER, DURATION
and DELAY START features. Touch the sensor
repeatedly until the desired function symbol is
Temperature/Setting
selection dial to set the time.
The available functions are displayed as follows:
(you can set it after DURATION is entered).
DELAY START function is activated when you set
DURATION and then END TIME. DURATION and
END TIME determine when the appliance turns on
operation.
KITCHEN TIMER and DURATION/DELAY START
functions can be used at the same time.
Clear timer settings.
Touch and hold and to clear all timer settings.
Additional timer display.
Additional timer display located in the bottom right
corner of the display has functions, depending on
the oven operating mode (when DURATION and
DELAY START functions are active).
1. DURATION. When active, the symbol is
displayed. The additional timer display shows
the time that has elapsed since the oven was
turned on. The time indication is cleared when
you set the function selector dial to 0.
2. The additional timer display shows the start time
when DELAY START function is active. The
3. The additional timer display shows the
remaining time when DURATION and DELAY
START functions are active. The symbol
remaining time. For the DELAY START function,
when start time is reached, the additional timer
display will show the remaining cooking time.
KITCHEN TIMER
The KITCHEN TIMER counts the time down. When
The KITCHEN TIMER operates independently from
other functions.
Set the KITCHEN TIMER
Touch
The KITCHEN TIMER
until you use Temperature/Setting selection
dial to set the time. Turn Temperature/Setting
selection dial left/ right to set the time. Touch
again to start the countdown, you will hear a
00:00) but you do not touch
the KITCHEN TIMER countdown will start. When
the KITCHEN TIMER countdown starts the main
time display shows current time and kitchen timer
symbol is shown.
Follow the same procedure to adjust the KITCHEN
TIMER time.
Page 19
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
DURATION
00:01h to 10:00h (with an accuracy of 1 minute).
When you set DURATION, the ECO function is also
active (as described in ECO function section), which
is indicated by the symbol.
Activate DURATION
Set Function Selector Dial to any function
(other than 0) to be able to set DURATION. Touch
and hold
until symbol
Temperature/
Setting selection dial to set DURATION. Touch
symbol
again to activate DURATION.
If you do nothing for 5 seconds, the function
activates automatically.
When DURATION starts the main time display
shows current time and symbol is shown. The oven
turns on. The remaining duration is counted down
as shown below.
Set function selector dial to 0to cancel
DURATION.
Follow the same procedure to adjust DURATION
time.
End DURATION function
When DURATION
as if you set function selector dial to 0. You will
The symbol and time indication 00:00 will
function selector dial to 0.
When DURATION has elapsed you will not be able to
function
selector dial to 0. Touch to set DURATION
again.
Touch any control to silence the alarm.
DELAY START
You can delay start of the oven and set the END
TIME as needed. Based on the END TIME and
DURATION the appliance automatically calculates
Start Time. The appliance will automatically turn
END TIME
to 23h 59min and DURATION up to 10h with an
accuracy of one minute.
Activate DURATION. Touch and hold
DURATION and starts
Temperature/
Setting selection dial to set END TIME. Touch
beep.
Once DELAY START is activated the main time
display shows the current time. The and
symbols are on. The appliance counts down the
time remaining to start based on set END TIME and
DURATION. When the oven starts the symbol
END TIME.
Set function selector dial to 0 to cancel DELAY
START. The set temperature will be reset.
Follow the same procedure to adjust the settings.
Page 20
.........................................................................................................................................................
.........................................................................................................................................................
>> OPERATION
End DELAY START
When END TIME
(as if you set function selector dial to 0). You will
and symbols and the remaining time 00:00
alarm. Turn function selector to 0.
The settings will clear. You will not be able to use
function
selector dial to 0.
Touch and set DURATION again.
Using the roaster
The roasting process occurs as a result of heat rays
emitted by element, which are absorbed by the
food.
In order to switch on the roaster you need to:
• Choose one of the heating functions .
• Heat the oven for approx. 5 minutes (with the
oven door shut).
• Insert a tray onto the appropriate cooking
level; and if you are roasting directly on wire
rack, insert a tray for dripping on the level
immediately below (under the wire rack).
• Close the oven door.
IMPORTANT
When roasting it is recommended that the oven
door is closed.
When the roaster is in use accessible parts can
become hot. It is best to keep children away from
the oven.
Table of contents
Other Schweigen Oven manuals
