SCINTEX SPKP12V40 User manual

1 OF 4
www.scintex.com.au | [e-mail]
Model: SPKP12V40 & SPKP24V40
Portable Diesel Transfer Pump Kit
12V & 24V DC
User’s Manual

2 OF 4
WARNING: Read carefully and understand all
INSTRUCTIONS before operating. Failure to follow the safety
instructions and other basic safety precautions may result in
serious personal injury.
A. DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY
IN CONFORMANCE WITH THE DIRECTIVES
98/37/EEC (MACHINERY • 97/23/EEC (PRESSURE VESSELS)
89/336/EEC (ELECTOR-MAGNETIC COMPATIBILITY) AND FURTHER MODIFICATIONS
2000/14 DIRECTIVE ON LIMITATION OF NOISE
B. MACHINE DESCRIPTION
The fuel box is made from high density polyethylene material. 1PC DC pump equipped with the suction
hose, delivery hose and nozzle are fixed and installed internally to the box. For more convenient operation,
the pump and fittings are connected by rotating swivel connectors.
PUMP: self-priming, volumetric, rotating vane pump, equipped with by-pass valve.
MOTOR: Brush motor, DC, low tension with intermittent cycle, closed type in protection class IP55, directly
flanged to the pump body.
SUCTION TUBING:
- Minimum recommended nominal diameter: 3/4”
- Nominal recommended pressure: 10bar/145PSI
- Use hose suitable for suction pressure
DELIVERY TUBING:
- Minimum recommended nominal diameter: 3/4”
- Nominal recommended pressure: 10bar/145PSI
Nozzle:
- Aluminium Manual nozzle
- Connection: 3/4’’

3 OF 4
C. TECHNICAL DATA
C1. Electrical Data
Kit Model PUMP MODEL FUSES
ELECTRICAL POWER FLOW RATE
Current Voltage(V) GPM/LPM
SPKP12V40
SPT12V40LPM 25 DC 12 10/40
SPKP24V40
SPT24V40LPM 15 DC 24 10/40
D. OPERATING CONDITIONS
Refer to pump manuals for SPT12V40LPM & SPT24V40LPM
E. Installation and Operation
The pump box includes 1pc DC pump, connecters, suction hose with filter, delivery hose and manual
nozzle.
1 ) Before using, put the pump box on level footing. Then take out the nozzle and delivery hose, rotating
the hose connectors to the best operation position.
2 ) Take out the suction hose and rotating the hose connectors to best operation position put the suction
hose with filter to the drum bottom.
3 ) Check all hoses and fittings.
4 ) After using, take out the suction hose and stand for several minutes to drain fuel in the hose.
5 ) At the same time, start the pump and run dry for several seconds to drain remaining fuel.
6 ) After emptying the fuel in the hose and pump, please retract the suction hose to the box then retract
the nozzle and delivery hose for better storing and moving.
NOTE : Please refer to the Pump Manuals for applications and more details.

4 OF 4
F. DIAGRAM AND PARTS LIST
1. MODELS: SPKP24V40 & SPKP24V40
NO. Description QTY. NO. Description QTY.
1 PLASTIC BOX 1 4 DELIVERY HOSES 1
2 PUMP 1 5 SUCTION HOSES 1
3 SCREW 4 6 NOZZLE 1