Scooterpac Canopy User manual

YOUR USER MANUAL

Come rain or shine
its fine out with
ScooterPac.
Take a quick read
of this manual
to get the most
out of your
folding canopy.

Contents
Quick start guide
1
5
Fitting your canopy
Detailed guide to using your canopy
9
15
How to keep your canopy clean
brighten
yourday
scooterpac.com

1
Quick start guide - feature guide 1
Basket fixing access
Hard perspex screen
Access zips
Coloured coded velcro

1
Quick start guide - feature guide 2
Securing plunger
Adjustable arms
Fixing spiggot

Quick start guide
First fit
the canopy to
your scooter
Tip: Get your local dealer to fit the canopy or see page x
Next fold out
the frame of
the canopy

Then unfold
the sides one
at a time
Lastly zip up
the sides for
total protection!

Fitting the canopy - before you start
You will need;
Allen key(s) Spanner(s) 1 x Hand wheel
You may need;
Socket wrench Longer bolts Velcro

Arrange the fixings
1. Spigot
4. M6 Hex bolt 5. M6 Nyloc nut
2. M8 Nyloc nuts X 2 3. M8 washers x 4
6. M6 Nylon washer x 2

Slot the spigot onto the accessory bar under the scooter seat
Tip: ensure that your accessory bar is smooth and rust free before fitting

Insert the hand wheel onto the nut on the accessory bar and tighten up
You may need;
If there is no nut on the accessory bar you may need a ball-pin bolt.
Call 03301 241733 or your local dealer.

Remove the bolts on the armrests
Tip: there may not be bolts on the arm, they may be on the the seat

Next undo the quick-release clips on the adjustable arms of the frame,
and take out the bracket.

Now bolt these brackets to the armrests with the bolts
you removed earlier. The bracket can be fitted either way around.
(You may need slightly longer bolts to do this.) Do not tighten.
Tip: use the hole in the bracket which orientates it best

Once the brackets and spigot are fitted, simply slide the frame
into them. Then tighten the bolts on the armrest.
Tip: loosen the arms on the frame so that they slide

Next simply push the frame towards the scooter, and tighten the quick-release
clamps then tighten the bolts onto the spigot.
With the smaller bolt put a nylon washer either side of the
frame. With the large nuts use the metal washers.

Now tighten the arms of the frame, ensuring that they are level.


The ScooterPac is now ready for use!

1
Detailed guide to using your canopy
Tip: Refer to page x for parts diagrams
The ScooterPac folding canopy is as functional as it is beautiful.
To achieve this we included colour coded velcro and super flexible material amongst
other innovations to make things simpler when folding your canopy away.
Follow this simple guide to get the most from your ScooterPac.

Easiest way to fold out your canopy
Firstly take the main frame and lift it up.