Scott SRX190 User manual

SX 0R19
USER MANUAL AND INSTALLATION INSTRUCTIONS
FM Stereo Radio
RDS (Radio Data System) Function
Anti-Shock Mechanism
Telephone Mute Function
40WX4HighPower Output
CD/MP3/WMA/SD/USB/AUX CAR RADIO
M2 M3 M4 M5 M1
MODE
M6 TA AF PTY
VOL
VOL SEL
AUX IN
AMS SCAN
BAND
REG EQ
DISP
SCN RPT SHF -10 +10
LOUD
ENTER
SRX 190

GB-1
CONTENTS
CONTENTS...............................................................................................................................................GB-1
ACCESSORIES........................................................................................................................................GB-2
PRECAUTION.........................................................................................................................................GB-3
INSTALLATION........................................................................................................................................GB-4
USING THE DETACHABLE FRONT PANEL .................................................................................................. GB-7
WIRING DIAGRAM.............................................................................................................................……... GB-8
OPERATIONS.......................................................................................................................................GB-9
LOCATION AND FUNCTION OF KEYS ..........................................................................................................GB-9
GENERAL OPERATIONS .......................................................................................................................... GB-10
RADIO OPERATIONS ............................................................................................................................... GB-14
RDS (RADIO DATA SYSTEM) OPERATIONS ...................................................................................……..GB-15
CD/MP3/WMA DISC OPERATIONS.........................................................................................…….............. GB-17
SD/MMC MEMORY CARD OPERATIONS.................................................................................................... GB-19
USB OPERATIONS .........................................................................................................................………. GB-20
AUX IN OPERATIONS................................................................................................................................ GB-20
DISC NOTES.............................................................................................................................................GB-21
SPECIFICATIONS.......................................................................................................................GB-23
TROUBLESHOOTING..........................................................................................................................GB-24

Mounting Bracket
(Half Sleeve)
X1
Removable Trim Ring
equipped on the unit
X1
Small metal Strip
X1
Plain Washer
X1
Spring Washer
X2
Tapping Screw
X1
Screw
X4
Hex Nut
X1
Mounting Bolt
X1
Release Key
X2
ISO Wire Connector
X1
Protective Case
X1
Removable Control Panel
X1
User Manual
X1
ACCESSORIES
GB-2
SR 0X19
USER MANUALAND INSTALLATION INSTRUCTIONS
CD/MP3/WMA/SD/USB/AUX CAR RADIO
FM Stereo Radio
RDS (Radio Data System) Function
Anti-Shock Mechanism
TelephoneMute Function
40 W X 4 High Power Output
USB Adaptor Cable
X1
M2 M3 M4 M5 M1
MODE
M6 TA AF P TY
VOL
VOL SEL
AUX IN
AMS SCAN
BAND
REG EQ
DISP
SCN RPT SHF -10 +10
LOUD
ENTER
SRX 190
M2 M3 M4 M5 M1
MODE
M6 TA A F PTY
VOL
VOL SEL
AUX IN
AMS SCAN
BAND
REG EQ
DISP
SCN RPT SHF -10 +10
LOUD
ENTER
SRX190

This unit is designed and manufactured with the users safety in mind, however any improper use or operation may result in
certain dangers. It is therefore highly recommended to read this manual thoroughly and adhere to the following precautions.
To prevent an electrical shock, do not open the housing of the unit. In any case of malfunctioning, only have the unit serviced
by an approved and qualified service centre.
Do not expose to any water or to a very humid environment. Do not operate the unit when your hands are wet as this may
cause a short circuit.
For safe driving, keep the volume low in order to concentrate on traffic conditions.
Do not clean the unit with alcohol, only clean with a soft dry cloth.
If the unit has been kept at a high temperature or in a high humidity environment, cool down the car interior before turning on
the unit.
Do not use the unit for a long time without running the vehicle engine, it may drain the battery and the vehicle engine may not
be able to start.
Before final installation in the dashboard opening, first connect the wiring and make sure the unit is working properly.
Only use parts provided with the unit to ensure proper installation.
Do not route wiring in places that the heat may melt the wiring insulation.
When replacing the fuse, ensure that the new fuse has the capacity recommended by the manufacturer.
Do not operate the player with scratched, bent or broken discs. When a disc is not loaded properly, do not force in into the
disc loader.
Never insert any other objects into the disc loader like a coin or pin, etc as this may cause damage or a short circuit.
Do not use different disc formats other than 12cm round discs.
If the unit is disconnected to the battery, it will lose memorized data.
If the source disc has poor sound quality due to scratches, dirt or a bad recording, the playback sound quality may be poor.
SAFETY PRECAUTIONS
OPERATION PRECAUTIONS
PRECAUTION
GB-3

Installation
Notes:
- Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
- Before finally installing the unit, connect the wiring and make sure that the unit works properly.
- Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
- Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an
emergency stop.
- If installation ang e exceeds 30°from horizontal, the unitl may not perform properly.
- Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the
heater, or where it would be subject to dust, dirt or excessive vibration.
Remove the CD mechanism transit screw before installation
Before install the unit, must remove the two screws with label “REMOVE SCREW”.
Installation Opening
This unit can be installed in any dashboard having an opening as shown below (DIN standard):
GB-4
182 mm
53 mm

Installing the unit
Be sure you test all connections first, and then follow these steps to install the unit.
1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Press the OPEN ( ) button to remove the control panel (For details, refer to ' ').
4. Lift the top of the outer trim ring then pull it out to remove it.
5. Use the two supplied release keys to remove the unit from the mounting bracket. Insert the left (“L”) and right (“R”) release
keys as far as they will go (with the notches facing up) into the appropriate slots at the middle left and right sides of the unit.
Then slide the sleeve off the back.
USING THE DETACHABLE FRONT PANEL
GB-5
6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend out the tabs located around the sleeve
with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective. To secure the
sleeve in place, bend out the appropriate tabs so that they make contact with the dashboard.
7. Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables.
8. Slide the unit into the sleeve until it locks into place.
9. To further secure the unit, use the supplied metal strap to secure the back of the unit in place. Use the supplied hardware
(Hex Nut (M5mm) and Spring Washer) to attach one end of the strap to the mounting bolt on the back of the unit. If necessary,
bend the metal strap to fit your vehicle's mounting area. Then use the supplied hardware (Tapping Screw (M5x25mm) and
Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard.
Notch

This metal strap also helps ensure proper electrical grounding of the unit.
Ensure that you install the short part of the mounting bolt to the back of the unit and the other long part to the dashboard.
10. Reconnect the cable to the vehicle battery's negative (-) terminal. Then replace the outer trim ring and install the unit's
front panel (see the steps of ' ').
1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery's negative (-) terminal.
2. Press the ( ) button to remove the front panel.
3. Lift the top of the outer trim ring then pull it out to remove it.
4. Insert both of the supplied keys into the slots at the middle left and right sides of the unit then pull the unit out of the
dashboard.
5. Remove the metal strap attached to the back of the unit (if attached).
TO ATTACH THE FRONT PANEL
Dismantling the unit
OPEN
GB-6

USING THE DETACHABLE FRONT PANEL
REMOVING AND PROTECTING DETACHABLE FRONT PANEL
The front panel of the unit may be removed as a theft deterrent. After removing the front panel, use the case provided to keep
the front panel from getting damaged.
1 Press the OPEN button (6) to flip down the front panel..
2 Grasp the right side of the front panel, then gently
push the front panel towards the left side before pulling it
out from the unit.
3 Store the front panel in the protective case provided
for safe keeping.
.
.
OPEN button
front panel
front panel
protective case
1
2
TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with the plate facing down.
First attach the left side of the front panel to the unit by inserting
the hole into the left holder.
Then slightly push it to the left and attach the right side hole into the
right holder. Finally push up the front panel.
Fig.2Fig.1
Fig.4Fig.3
GB-7

Wiring Diagram
ANTENNA Socket
L
R
FUSE
ISO CONNECTOR
GB-8
ISO connector:
Part A:
A1:
A2:
A3:
A4:
A5:
A6:
A7:
A8:
Part B:
B1:
B2:
B3:
B4:
B5:
B6:
B7:
B8:
No Connect
No Connect
No Connect
Battery B+ (Yellow)
Antenna (Blue)
No Connect
Accessory (Red)
Ground B- (Black)
Rear Right + (Violet)
Rear Right - (Violet/Black)
FrontRight+(Grey)
Front Right - (Grey/Black)
Front Left + (White)
Front Left - (White/Black)
Rear Left + (Green)
Rear Left - (Green/Black)
White RCA connector to front left amplifier (not included)
Red RCA connector to front right amplifier (not included)
Red RCA connector to rear right
amplifier (not included)
White RCA connector to rear left
amplifier (not included) output
Violet to rear right speaker +
Violet/Black to rear right speaker -
Grey to front right speaker +
Grey/Black to front right speaker -
White to front left speaker +
White/Black to front left speaker -
Yellow to Battery B+
BlacktoGNDB-
Red to Accessory
Blue to Antenna
Green to rear left speaker +
Green/Black to rear left speaker -
Orange Telephone Mute
Connection Cable

Operations
Location and Function of Keys
Front panel:
The front facet after removing the front panel:
Descriptions of Function Controls
GB-9
2
4
21 15
20
3
8
9
28
27
2625
24
23
14
19
18
10
13
22
17
16
1
30
56
12
11
7
29 31
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
Power ( )/ Mute Button
LCD display
VOL + Button
VOL - Button
SEL (MENU/ENTER) Button
Open ( ) Button
Disc slot
Eject ( ) key
SD/MMC Memory Card Slot
USB Port
MODE Button
DISP (Display) Button
Anti-theft LED Indicator
RESET Button
BAND/ ENTER Button
Preset Station (M1-M6) Buttons
AMS (Auto-storage/ Preset memory Scan)
UP ( ) Button
Tune up, Seek up,
track up, fast forward
DOWN ( ) Button
Tune down, Seek down,
track down, fast reverse
AF/REG Button
TA Button
PTY Button
EQ (Preset Equalizer) Button
SCAN/LOUD Button
(Play/Pause)/ M1 Button
SCN (Scan) /M2 Button
RPT (Repeat) / M3 Button
SHF(Shuffle)/M4Button
-10track/M5Button
+10track/M6Button
AUX Input Jack
M2 M3 M4 M5 M1
MODE
M6 TA AF PTY
VOL
VOL SEL
AUX IN
AMS SCAN
BAND
REG EQ
DISP
SCN RPT SHF -10 +10
LOUD
ENTER
SRX 190

Reset the unit
Power on/off
Operating the unit for the first time, after replacing the car battery or changing the connections, you must reset the unit.
1.Turn off the unit power.
2.Press the ( ) button and remove the front panel, then press the button with a ballpoint or similar object to
restore the unit to the original factory settings.
In power off mode, switch on the unit by pressing any button except the button and the ( ) button or inserting a
disc to disc slot USB device to USB port or SD/MMC card to card slot.
When the system is on, press and hold the ( ) button long to turn off the unit.
OPEN RESET
OPEN EJECT
,
POWER
Sound adjustment
System setup menu
- VOL+ VOL-
- SEL VOL +/-
Note:
SEL
VOL+ VOL-
Press the or button to adjust volume level.
Press the button repeatedly to select the sound mode volume, bass, treble, balance and fader. Press the button
to adjust the level of the selected sound mode:
- VOL:from 00 to 45 (45 levels)
-BASS/TRE:from-7to+7
- BAL (Balance): 8L, 7L, ~,0, ~, 7R, 8R
- FAD (Fader): 8F, 7F, ~, 0, ~, 7R, 8R
1. In each mode, w
Press the button and hold for more than 2 seconds to access the system setup menu mode, then
“INVOL” (Initial Volume) “ADJ” ( adjust the clock) “TA VOL” “EON”
“STEREO/MONO” “Exit”.
After selecting the desired menu item, press the or button to select the mode of the selected item.
gg gg
gg g g g
henthe unit has not been adjusted for about 5 seconds, the current setting will be saved and it will return to
the previous mode.
2. When using preset EQ modes, you cannot have access to Bass and Treble settings.
press the button to
select the menu item in sequence as follows:
SEL
(traffic announcement volume) “DSP” (equaliser)
“LOUD” “LOC” (local stations) ALRM” (alarm function)
General Operations
GB-10

“
is
ress the or button to choose FM STEREO or MONO
audio effect.
gggg
VOL + VOL -
INITIAL VOL” (initial volume) :
“INVOL 17” VOL+ VOL-
CLOCK “ADJUST” (adjust the clock time):
“ADJ 00.00” VOL + VOL -
“TA VOL” (traffic announcement volume):
VOL + VOL -
“EON” ON/OFF:
VOL + VOL -
“DSP” (equaliser mode):
“
“LOUD” :
VOL + VOL - LOUD
“LOC” (local stations):
“ALRM” (alarm function) :
VOL+ VOL-
VOL+ VOL- MODE BAND
will be visible on the LCD display. Ppress the or button to adjust the initial volume of theis unit.
will be visible on the LCD display. Press the to adjust the hour, and press the button to adjust the
minute.
This function allows you to define the minimum volume for the traffic announcements. The adjustable range is 0~45. The
defaulted value is 17. Press the or button to adjust the volume of the traffic announcements.
Press the or button to choose “EON ON” or “EON OFF”.
The car audio device is equipped with 4 preset equalizer modes. Press the VOL + or VOL button (or the EQ button) to select
one of the following EQ modes: DSP NONE” “DSP CLAS” (classical) “DSP ROCK” “DSP POP” “DSP FLAT”
(normal). When using preset EQ modes, you cannot have access to Bass and Treble settings.
Press the or button (or press and hold down the button) to choose switch the loudness on or off.
In urban areas, most stations are strong enough and “LOCAL ON” mode should be selected. Switch to LOCAL OFF mode to
search for stations with weaker signals.
Press the or button to choose “ALRM ON” or “ALRM OFF”.
When the unit is switched on, briefly press the (Power) / MUTE button to switch mute on or off. The mute will be also
switched off when the or , , is pressed.
Mute on/off
STEREO/MONO:
FM station is received in stereo mode. However, if the signal weak or reception is not as good as you would like, switching to
MONO mode usually improves the overall sound quality.P
GB-11

To select playback mode
Last position memory feature
In power on mode, press button repeatedly to select the different modes in the following sequence: RADIO, CD (with a disc inside
the disc slot) , USB(with USB device inserted), SD/MMC(with SD/MMC card inserted), AUX mode.
- During disc, USB, SD/MMC card playback, if you turn off the unit and then switch on it, the unit will resume playing from the
point that it was interrupted.
MODE
-During disc, USB, SD/MMC card playback, if you switch to other mode, and then return the previous mode again, the unit will
resume playing from the point that it was interrupted.
Press the button repeatedly to display as follows:
In radio mode: CT -> PTY(Type of program) -> PS (Name of the station) ->FREQ ->
In CD/USB/SD/MMC mode: CT-> PTY(Type of program) -> FREQ ->PS -> Track number /Running time or other information
* CT or PTY information, the display shows “CT NONE” or “PTY NONE”.
In radio mode:CT->PTY NONE-> PS NONE ->FREQ ->
In CD/USB/SD/MMC mode: CT -> PTY NONE -> FREQ -> PS NONE -> Track number /Running time or other information
Each displaying time is 5 seconds, and come back to 1'st position after 5 seconds.
CT = clock time FREQ = frequency.
The audio system automatically mutes whenever a telephone call comes in.
Note: the function will not work if a cable is not connected to the car phone.
When a call is received, 'TEL CALL' is displayed and all the unit functions are temporarily interrupted.
Hang up the phone.
'TEL CALL' disappears from the display.
INFORMATION DISPLAY
TEL Mute
DISP
- receiving a non RDS station:
Notes:
1. When a call comes in
2. When the call ends
- When receiving an RDS station:
When
If the unit does not receive
The unit returns to the previous state and the volume increases gradually.
GB-12

ESP Function
Anti-theft LED Indicator
This unit has the electronic shockproof function. This enables the unit to be shockproof for several seconds:
CD: 40 seconds.
MP3/WMA: 100 seconds.
Designed as a theft deterrent, the red LED will flash when the unit is turned off and the front panel is removed.
GB-13

Radio Operations
Press the button to select the radio mode.
one of the three
You can store up to a total of 18 radio stations in the memory (18 FM), manually or automatically.
- Select a band (if needed)
- Select a station by or buttons, refer to auto / manual tuning.
- Hold a Preset button (M1-M6) for at least 2 seconds.
- Select a band (if needed).
- Press a preset button (M1-M6) briefly to recall the stored station. In case of RDS mode, the strongest AF is selected after AF
searching.
Press the button to scan each preset station. If the field strength level is more than the threshold level, the radio will
hold at this preset station for 5 seconds with sound output, then go to next station until all 6 FM stations are scanned, finally
the radio will play at the preset station where scanning started. The preset station number on the LCD will flash during the
process. Press the again to stop preset scan.
MODE
- To store a station:
- To recall a station:
- Preset scan:
AMS
AMS
To store / recall a preset radio stations
Auto store / Preset scan
To select a radio band
Auto/ Manual tuning( FM 50KHz/step)
BAND
- Automatic search mode:
- Manual search mode:
In radio mode, Press the button repeatedly to select radio broadcasting
bands: ->FM 1-> FM 2 -> FM 3 ->.
Press the or button, the automatic search will start. It will search upward or downward for the strong signal radio station
within the current band. “AUTO” appears on the LCD display.
Press and hold the or button until “MANUAL” appears on LCD display, it will change into manual searching mode.
Press the or button repeatedly to manually search upward or downward step by step for the desired radio station within
the current band. For fast manual searching, press and hold the or button.
In manual search process, if the both buttons haven’t been pressed within 5 seconds, it will change into automatic search
mode automatically. “AUTO” appears on the LCD display.
GB-14

To replace the current frequency with the alternative frequency
Regional Program Operation
Using PTY to Select Program
Press button short to switch AF mode on or off. There are 3 state of the AF on the LCD display:
AF switching mode off.
AF switching mode on, and has RDS information.
AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking
time of each AFs depends on the signal strength of current station, from a few minute for strong station to few seconds for
weak station. Every time that new AF is stronger than current station, it switches over to that frequency for very short time.
Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program. During
FM mode, when AF is on, manual store, Auto store/preset scan function can only receive and save RDS program.
Press button for 2 seconds to switch on or off region mode.
Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a certain time
period.
When region is on, the current listening program remains unchanged. When region is off, it allows the reception moved to the
regional station.
AF/REG “”
Segment “AF” off:
Segment “AF” on:
Segment “AF” flashing:
AF/REG
segment
Press and hold down the button for more than 2 seconds to enter the program type menu. The default type is NEWS.
The or button can be used to select different program types as follows:
PTY
VOL+ VOL-
RDS (Radio Data System) Operations
- Auto store:
AMS
.
SCAN
Press the button for more than 2 seconds to start auto store. The radio will scan from the lowest frequency, and
automatically store the 6 strongest stations into the preset memories. When auto store is complete, the radio will start preset
scan to the stored 6 station
Press the button briefly and the tuner starts scanning. When the tuner detects a station with a good signal, it pauses for
about 5 seconds and after that it continues to scan. Press any key to stop the scanning.
Scan function
GB-15

NEWS -> AFFAIRS -> INFO -> SPORT-> EDUCATE -> DRAMA -> CULTURE -> SCIENCE -> VARIED -> POP M -> ROCK M ->
EASY M -> LIGHT M -> CLASSICS -> OTHER M -> WEATHER -> FINANCE-> CHILDREN -> SOCIAL -> RELIGION
-> PHONE IN -> TRAVEL -> LEISURE -> JAZZ -> COUNTRY -> NATION M -> OLDIES -> FOLK M -> DOCUMENT -> TEST ->
ALARM -> NEWS
If no button is pressed for 5 seconds, it returns to previousl state.
Press the button briefly to switch the PTY search on or off. When PTY search mode is on, and the or button is
pressed, PTY search will start. PTY search stops when the unit finds a station with
PTY
the selected program type, otherwise,
“NOT FND” (not found) will be visible on the LCD display. During the PTY search process, press any key to stop the PTY
search.
Listening to Traffic Announcement
TA button is operated as follows:
TA TA
TA
,
TA “TA”
TA interruption function
TA
Press button to turn mode on or off.
When mode is on and a traffic announcement is transmitted:
- When the unit was in CD (MP3/WMA), USB/SD/MMC or AUX IN mode, it will switch temporarily to radio mode.
- Temporary switch over to an EON linked station when EON detects a traffic announcement on that other program.
- If the volume level was under the threshold point it will be raised to the threshold point.
- When mode is on, segment is turned on.
- When a TP station is received,segment “TP” is turned on.
The current traffic announcement is cancelled by pressing this key. But the mode will not be off.
GB-16

CD/MP3/WMA Disc Operations
Press the button to select the disc mode.
1. Press the ( ) button on the front panel to flip down the front panel and then insert a disc into the disc slot with the
printed side facing upward; and close the front panel, the player will play the disc automatically.
2.To eject the disc, press the ( ) button to open the front panel and then press the ( ) button.
- During playback, press the button to interrupt the playback. Press again to resume the playback.
MODE
OPEN
OPEN EJECT
Loading/Removing a Disc
Playing/Pausing
Playing the previous/ next track
Playing forward and backward
Playing the +/- 10 track up or down
Introduction playback
Repeat playback
Random playback
- During playback, press the button to play the next track.
- During playback, press the button once to play the current track from the beginning. Press the button twice
continuously to play the previous track.
During playback, press and hold the or button to fast forward or fast reverse. Release the buttons when the desired
location is found, and normal playback starts.
During MP3/WMA playback, press the , button to play the +/- 10 track up or down.
You can play the beginning of every track for 10 seconds in sequence.
In CD/MP3/WMA file playback, briefly press the button to play the first 10 seconds of each track. Press it again to stop
scanning and play the current track.
In CD/MP3/WMA files playback, briefly press the button to Press again to stop repeat
playback and resume normal playback.
- In CD/MP3/WMA file playback, briefly press the button to
M5 (-10) M6 (+10)
SCN
RPT
SHF
continuously play the current track.
play all tracks of the disc in random sequence. Press again to
cancel random playing.
GB-17

GB-18
Select the tracks for playback in MP3 or WMA mode
You can access 3 different types of track search modes for MP3/WMA files:
Track search File name search Folder search Exit
a) Press the button once to access the track number search mode which allow you to quickly find a specific MP3/WMA
title by its file number, and “00 ”
Press the or button to select your favorite track. Finally press the button to confirm and play the
selected track.
MP3 mode,
Track search mode:
AMS
VOL+ VOL- BAND /ENTER
File name search mode:
*-----
*******
will be displayed.
b)
a) Press the button twice, “A ” will be shown on the LCD display and the first character “A” will blink.
b)Press the or button to set the blinking character. The character will be changed from “A” to “Z” and “0” to “9” in
the order of A~Z and 0~9. Press the button to confirm the character entered and the next character will blink for setting.
c) After you have press the button to confirm.
a) Press the button three times to access the folder search mode.
b) Press the / button or / button to select a desired folder. If there is no root folder in the disc, the LCD will
display “ROOT”.
c) Press the button to play the first track of the selected folder.
In the folder name, file name, information will scrol on the LCD display automatically.
As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items
underlined above will be scrolling on the LCD display, otherwise, they will not appear.
AMS
VOL + VOL -
SEL
BAND/ENTER
Folder search mode:
AMS
VOL+ VOL-
BAND/ENTER
Note:
ID3 information for MP3 file
title, artist and album l
entered the first letters of the file you are looking for, If the unit
finds a file starting with these letters, play starts automatically. If no file corresponding to your search is found, the message
“NO MATCH” will be visible on the display. If there are several files starting with these letters, the unit will start to play the first
file in alphabetical order.

GB-19
Using the SD/MMC card:
MODE
Note:
When you insert a SD/MMC card into the memory card slot, the player will read the SD/MMC card automatically.
If you insert a disc into the disc slot while reading the SD/MMC card, the unit will play the disc. You can press button to
select SD/MMC mode.
SD/MMC memory card playback operation is the same with the CD/MP3/WMA disc operations described above.
- When reading the memory card, please don't touch or take out the card.
- If following the instruction above, the unit can't read the card, please check if the card is in good condition, or take out the
card and then insert it into the card slot once more.
SD/MMC Memory Card Operations