Scout Sea-Hub Assembly instructions

WiFi/3G/USB Mobile Router
ed. 01-2017
www.scoutantenne.com
Advanced User Manual

Sea-Hub Advanced User Manual
Page 2
TABLE OF CONTENTS
INTRODUCTION ................................................................................................................... 3
HARDWARE DESCRIPTION ................................................................................................. 4
INITIAL CONFIGURATION ................................................................................................... 6
CONNECTION TYPE: USB WIRELESS ADAPTER ................................................................ 7
CONNECTION TYPE: 3G DONGLE ..................................................................................... 10
CONNECTION TYPE: ADSL MODEM .................................................................................. 12
CONNECTION TYPE: BRIDGE (AP) ..................................................................................... 15
TECHNICAL SPECIFICATIONS ............................................................................................. 16
COMPATIBLE 3G USB MODEM .......................................................................................... 17
Scout

Sea-Hub Advanced User Manual
Page 3
Scout
INTRODUCTION
The Sea-Hub is a WiFi/3G/USB mobile router that supports routing from an Internet Service Provider (ISP) connection (DSL or cable
modem) to a local network. It is simple to congure and can be up and running in few minutes.
KEY HARDWARE FEATURES
The following table describes the main hardware features of the Sea-Hub.
Description
WAN Port: One 100BASE-TX RJ-45 port for connecting to the Internet.
LAN Port: One 100BASE-TX RJ-45 port for local network connections.
USB Port: One USB slot for a 3G or 3.5G modem and USB Wireless Card
WPS Button: To set up a secure connection to a wireless device.
Reset Button: For resetting the unit and restoring factory defaults.
LEDs: Provides LED indicators for Power, WAN port, LAN port, and WLAN status.
Mounting Options: Can be mounted on any horizontal surface such as a desktop or shelf, or on a wall using two screws.
DESCRIPTION OF CAPABILITIES
- Internet connection through an RJ-45 WAN port.
- Local network connection through one 10/100 Mbps Ethernet port.
- DHCP for dynamic IP conguration.
- Firewall with Stateful Packet Inspection, client privileges, and NAT.
- NAT also enables multi-user Internet access via a single user account, and virtual server functionality (providing protected access
to Internet services such as Web, FTP, e-mail, and Telnet).
- VPN passthrough (IPsec, PPTP, or L2TP).
- User-denable application sensing tunnel supports applications requiring multiple connections.
- Easy setup and management through an easy-to-use web browser interface on any operating system that supports TCP/IP.
- Compatible with all popular Internet applications.
APPLICATIONS Many advanced networking features are provided by the Sea-Hub:
- Wired LAN — The Sea-Hub provides connectivity to wired Ethernet devices, making it easy to create a network in small oces or
homes.
- Internet Access — The Sea-Hub supports Internet access through a WAN connection. Since many DSL providers use PPPoE, PPTP,
or L2TP to establish communications with end users, the Sea-Hub includes built-in clients for these protocols, eliminating the need
to install these services on your computer.
- Shared IP Address — The Sea-Hub provides Internet access for up to 253 users using a single shared IP address account.
- Virtual Server — If you have a xed IP address, you can set the Sea-Hub to act as a virtual host for network address translation.
Remote users access various services at your site using a static IP address. Then, depending on the requested service (or port
number), the Sea-Hub can route the request to the appropriate server (at another internal IP address). This secures your network
from direct attack by hackers, and provides more exible management by allowing you to change internal IP addresses without
aecting outside access to your network.
- DMZ Host Support — Allows a networked computer to be fully exposed to the Internet. This function is used when NAT and re-
wall security prevent an Internet application from functioning correctly.
- Security — The Sea-Hub supports security features that deny Internet access to specied users, or lter all requests for specic
services. WPA (Wi-Fi Protected Access) and MAC ltering provide security over the wireless network.
- Virtual Private Network (VPN) Passthrough — The Sea-Hub supports the passthrough of three of the most commonly used VPN
protocols – IPsec, PPTP, and L2TP. These protocols allow remote users to establish a secure connection to another network. If your
service provider supports VPNs, then these protocols can be used to create an authenticated and encrypted tunnel for passing
secure data over the Internet (that is, a traditionally shared data network).
IPsec (Internet Protocol Security) — Encrypts and authenticates entire IP packets and encapsulates them into new IP
packets for secure communications between networks.
PPTP (Point-to-Point Tunneling Protocol) — Provides a secure tunnel for remote client access to a PPTP security gateway.
PPTP includes provisions for call origination and ow control required by ISPs.
L2TP (Layer 2 Tunneling Protocol) — Merges the best features of PPTP and the Layer 2 Forwarding (L2F) protocol. Like
PPTP, L2TP requires that the ISP’s routers support the protocol.

Page 4
Sea-Hub Advanced User ManualScout
HARDWARE DESCRIPTION
The Sea-Hub connects to the Internet through its RJ-45 WAN port. It connects directly to your PC or to a local area network using
its RJ-45 Fast Ethernet LAN port.
The 3G Mobile Wireless Router includes an LED display on the front panel for system power and port indications that simplies
installation and network troubleshooting
Connects
to power
LAN
port
WAN
port
Antenna
jack
USB
port
LED indicators
WPS buon
LED INDICATORS
The Sea-Hub includes four status LED indicators, as described in the following gure and table.

Page 5
Sea-Hub Advanced User ManualScout
ETHERNET WAN PORT A 100BASE-TX RJ-45 port that can be attached to an Internet access device, such as a DSL or Cable modem.
ETHERNET LAN PORT The Sea-Hub has one 100BASE-TX RJ-45 port that can be attached directly to a PC or 10BASE-T/100BASE-TX
LAN segments.
This port supports automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs,
switches, or hubs.
3G & USB Wireless Card USB PORT Supports connection to a wireless cellular 3G or USB Wireless Card for broadband Internet
access.
POWER CONNECTOR The Sea-Hub must be powered with its supplied power adapter. Failure to do so results in voiding of any
warrantly supplied with the product. The power adapter automatically adjusts to any voltage between 100~240 volts at 50 or 60
Hz, and supplies 12 volts DC power to the unit. No voltage range settings are required.
WPS BUTTON Press the WPS button to automatically congure the Sea-Hub with other WPS devices in the WLAN.
RESET BUTTON The Reset button is used to restore the factory default conguration. If you hold down the button for 5 seconds
or more, any conguration changes you may have made are removed, and the factory default conguration is restored to the
Sea-Hub.

Page 6
Sea-Hub Advanced User ManualScout
INITIAL CONFIGURATION
The Sea-Hub oers a user-friendly web-based management interface for the conguration of all the unit’s features. Any PC directly
attached to the unit can access the management interface using a web browser, such as Internet Explorer (version 6.0 or above).
CONNECTING TO THE LOGIN PAGE
It is recommended to make initial conguration changes by connecting a PC directly to the Sea-Hub’s LAN port. The Sea-Hub has a
default IP address of 192.168.2.1 and a subnet mask of 255.255.255.0. You must set your PC IP address to be on the same subnet
as the Sea-Hub (that is, the PC and the Sea-Hub addresses must both start 192.168.2.x). To access the Sea-Hub’s management
interface, follow these steps:
1. Use your web browser to connect to the management interface using the default IP address of 192.168.2.1.
2. Log into the interface by entering the default username “admin” and password “admin” then click OK.
The Sea-Hub can be alslo easily congured with a wireless device such as smartphones or tablets (or through
the WiFi connectivity of your laptop). You just need to scan for available networks, select Scout Sea-Hub
from the list, open your browser and type the IP address 192.168.2.1.

Page 7
Sea-Hub Advanced User ManualScout
HOME PAGE AND MAIN MENU
After logging in to the web interface, the Status page displays. The Home page shows the main menu and the method to access
the Setup Wizard.
SETUP WIZARD
The Wizard is designed to help you congure the basic settings required to get the Sea-Hub up and running. There are only a few
basic steps you need to set up the Sea-Hub and provide a connection.
Click on Easy Setup to bring up the wizard
Connection type: USB Wireless adapter
1
By selecting the connection type “USB Wireless adapter” you’ll set up the Sea-Hub to wirelessly re-broadcast a remote WiFi/
Internet signal locally to multiple wireless-enabled devices. To connect to the remote WiFi Internet signal you need to plug the
Scout WiFi antenna model KS-60 2.0 into the USB port of the Sea-Hub.

Page 8
Sea-Hub Advanced User ManualScout
On the following screen we congure the USB WiFi network. Leave Connection Mode set as Cable/Dynamic IP (DHCP) and select
Site Survey to see the wireless networks available to connect to.
Take a note of the Authentication and Encryption information for the network you are trying to connect to, this will be required
later - unless security is disabled.
Click on the button for the network you wish to connect to and press Select.
In the next screen you will now see that the details for the connection you selected have been added.
If the Network Type reads 802.11Ad Hoc, change to Infrastructure using the dropdown arrow.
If the WiFi network you are connecting to has security enabled you will need to enter the Mode (Authentication and Encryption
information you took a note earlier) and passphrase on this screen before selecting Next.

Page 9
Sea-Hub Advanced User ManualScout
The next screen shows the settings for the wireless LAN - this is what you will be connecting your wireless device to locally in order
to access the Internet.
The SSID is the name you will see when scanning for available WiFi networks: the default name is Scout Sea-Hub, you can change
it to something more meaningful if you wish.
We strongly advise adding some security to this connection in order to stop unauthorized connections, next screen shows example
settings. Once you’re happy with your settings press Done.
Create your password and type it in there
At this point you will be disconnected from the Sea-Hub as it recongures. Give it a few moments to sort itself out.
The screen should now look like the following one, Connected Status is now Connected.

Page 10
Sea-Hub Advanced User ManualScout
Congratulations! You now have access to the remote network.
Scan for available networks with your WiFi devices and connect to your own new network, type in the passphrase you chose before
and enjoy!
Connection type: 3G dongle
2
By selecting the connection type “3G dongle” you’ll set up the Sea-Hub to wirelessly re-broadcast the Internet connection from a
USB 3G Dongle locally to multiple wireless-enabled devices. The list of the 3G USB dongles that are compatible with the Sea-Hub
is printed at the end of this manual.
Note: ensure the USB 3G Dongle is plugged into the USB port (see datasheet on our website for a list of campatible devices) and
the Sea-Hub has its antenna attached before switching power on.
Select the “3G dongle” button to begin the wizard to connect to a 3G Broadband source.
On the following screen we congure the settings for your 3G Dongle. These vary between each service provider so you may need
to consult the documentation which came with your device, or your service provider.
Below is an example of a particular device from 3 networks.
- Pin Code Protect - Enables the use of a PIN code (personal identication number) to encrypt access to the 3G modem connection.
Some service providers do not require PIN code authentication. If a PIN code is not required just disable this function. (Default:
Disabled)
- Dial Code - A dialled access code that connects the USB device to the service provider.
- APN Service - The access point name (APN) that uniquely identies the 3G service provider.
- User Name - The user name of the account registered with the 3G service provider.
- Password - The password of the account registered with the 3G service provider.
There is a check box on screen market Budget Control, this is a useful feature which helps prevent you from exceeding your data
allowance if you have a limit on your tari. The next screen shows some example settings.

Page 11
Sea-Hub Advanced User ManualScout
Press Next to complete this page.
The screen below shows settings for the wireless LAN - this is what you will be connecting your wireless device to in order to access
the Internet.
The SSID Choice is the name you will see when scanning for available WiFi networks: the default name is Scout Sea-Hub, you can
change it to something more meaningful if you wish.
We strongly advise adding some security to this connection in order to stop unauthorized connections, next screen shows example
settings.

Page 12
Sea-Hub Advanced User ManualScout
The screen should now look like the following one, Connected Status is now Connected.
Congratulations! You now have access to the Internet.
Scan for available networks with your WiFi devices and connect to your own new network, type in the passphrase you chose before
and enjoy!
Once you’re happy with your settings press Done.
At this point you will be disconnected from the Sea-Hub as it recongures. Give it a few moments to sort itself out.
Connection type: ADSL modem
3
Select ADSL Modem to enable the Sea-Hub IP address to be assigned automatically from an Internet service provider (ISP) through
a DSL modem using Point-to-Point Protocol over Ethernet (PPPoE).
On the following screen we congure the settings for connecting the Sea-Hub to the DSL modem.
Mode: Single WAN (ADSL only)

Page 13
Sea-Hub Advanced User ManualScout
- WAN Connection - Select Single WAN (ADSL only) for the WAN port connection from the drop-down list.
- Enable MAC Clone - Some ISPs limit Internet connections to a specied MAC address. This setting allows you to manually change
the MAC address of the Sea-Hub’s WAN interface to match the PC’s MAC address provided to your ISP for registration. You can
enter the registered MAC address manually by typing it in the boxes provided. Otherwise, connect only the PC with the registered
MAC address to the Sea-Hub, then click the Clone your PC’s MAC Address (default: Disable).
- User Name - Sets the PPPoE user name for the WAN port (default: pppoe_user; Range: 1~32 characters).
- Password - Sets a PPPoE password for the WAN port (default: pppoe_password; Range: 1~32 characters).
- Verify Password - Prompts you to re-enter your chosen password.
- Operation Mode - Enables and congures the keep alive time and congures the on-demand idle time.
Note: If static IP is required for your DSL modem then you need to click Advanced tag followed by WAN to bring up Static IP
Conguration
You may enable 3G USB as backup WAN connection when DSL is not functioning.
Mode: Dual WAN (ADSL + 3G)
Please refer to Connection type: 3G dongle for setup detail on 3G modem.
Note: you may reverse the primary & backup WAN connection by click Advanced tag followed by WAN (see screen below).

Sea-Hub Advanced User ManualScout
Page 14
In case you want to set the WAN port to work linked to the Scout Rocket and use the 3G USB connection as
a backup (that activates automatically when the internet signal provided by the Rocket is no longer available)
please follow these steps:
Click Advanced tag followed by WAN (see screen below).
Select 3G from the drop-down list.
Select Cable/Dynamic IP (DHCP) from the drop-down list and ag Master WAN, then refer to Connection type: 3G dongle for setup
detail on 3G modem.
Click Apply and let the system restart. You’re now ready to use Rocket as primary WAN connection and 3G dongle as backup.

Page 15
Sea-Hub Advanced User ManualScout
Connection type: Bridge (AP)
4
Can the Sea-Hub be used as a wireless router? Yes it can - in Bridge mode. Bridge mode works just like a wireless Ethernet link
between an existing ADSL modem and wireless devices (such as smarphones and tablets) that wants to connect.
Note: this is the connection type you need to activate when you want to couple the Scout Rocket (that acts as a modem) to the
Sea-Hub.
The SSID Choice is the name you will see when scanning for available WiFi networks: the default name is Scout Sea-Hub, you can
change it to something more meaningful if you wish.
We strongly advise adding some security to this connection in order to stop unauthorized connections, next screen shows example
settings.
Once you’re happy with your settings press Done.
At this point you will be disconnected from the Sea-Hub as it recongures. Give it a few moments to sort itself out.

Page 16
Sea-Hub Advanced User ManualScout
Connect an Ethernet cable from one of your DSL modem’s Ethernet ports to the Sea-Hub WAN port. The Sea-Hub LAN and USB
ports will now have nothing connected to them.
Congratulations! The Sea-Hub is now ready to use in Bridge mode.
Scan for available networks with your WiFi devices and connect to your own new network, type in the passphrase you chose before
and enjoy!
Note: In this mode you can no longer access the Sea-Hub status page via browser. You cannot even access the Sea-Hub status
page through Ethernet to the Sea-Hub LAN port! The only way you can now access the Sea-Hub is by activating the reset button
on the bottom of the Sea-Hub and then doing the setup all over again.
TECHNICAL SPECIFICATIONS
Operang Frequency
FCC: 2412~2462MHz (Ch1~Ch11)
ETSI: 2412~2472MHz (Ch1~Ch13)
Japan: 2412~2484MHz (Ch1~Ch14)
Wireless Mode
WISP
Bridge
Router
Data Rate
802.11n ( 40MHz ): up to 150Mbps
802.11n ( 20MHz ): up to 72Mbps
802.11g: 54,48,36,24,18,12,9,6Mbps
802.11b: 11,5.5,2,1Mbps
Standards Wired: IEEE 802.3 (10Base-T) IEEE 802.3u (100Base-TX)
Wireless: IEEE 802.11, IEEE 802.11g, IEEE 802.11n
Physical
1 x 10/100Mbps WAN Port
1 x 10/100Mbps LAN Port
1 x detachable external 5dBi antenna
1 x Reset buon
1 x WPS Security Key
1 x USB Port
Output power
802.11b: 27dBm ± 2dBm
802.11g: 25dBm ± 2dBm
802.11n: 25dBm ± 2dBm
Security
SSID Broadcast disable
MAC lter
WEP Encrypon
WPA-/W PA2-PSK (Pre-shared Key)
WPA/W PA2 Enterprise mode (802.1x)
WiFi Protected Setup (WPS)
Router funcons
Stac Roung
VPN Pass through
NAT
802.11e WMM
IGMP Proxy
Dual SSIDs
Power Input 12V/1A
Size 93 x 70 x 26mm
Weight 74 g

Page 17
Sea-Hub Advanced User ManualScout
COMPATIBLE 3G USB MODEM
ALFA Onyx3G
ALFA Fly3G
Huawei E220
Huawei
E169/169G/169U
Huawei E219
Huawei D02
Huawei D21
Huawei D22
Huawei D23
Huawei D31
Huawei ET128
Huawei D12HW
Huawei D12LC
Huawei D21LC
Huawei E1762
Huawei E1552
Huawei E1782
Huawei E1552
Huawei E1782
Huawei E156G
Huawei E177
Huawei E353
Asus T500
SonyEricsson MD300
Qisda H21(single)
ZTE MF626
ZTE MF627
ZTE MF628
ZTE AC2726
ZTE MF636
ZTE MF637
ZTE AC2736
ZTE MF631
ZTE MF180
PROLINK PHS100
PROLINK PHS300
PROLINK PHS101
DoCoMo A2502
SoftBank C01LC
Sierra 598U
C-MOTECH U300
Qisda H21(dual)
EpiValley 8089
i-mobile U3300
BandLuxe C180
Option Icon 225
Dlink DWM-156
NOKIA CS-15
Royaltek Q110
CSL U1-TF