
MoCA Network Adapter2
Power
Ethernet Cable
Coaxial wiring
behind the wall
Coax Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
Notes: A MoCA splitter is required if there is an existing
device using the coax connection (i.e., Set-top box or TV)
MoCA Network Adapter1
Ethernet Cable
Splitter1
POE3
POE2
Coaxial wiring
behind the wall
Coax Cable or Fios
Modem/Router
Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
MoCA Network Adapter1
Power
Ethernet Cable
POE2
Coaxial wiring
behind the wall
Coax Cable or Fios
Modem/Router
Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
Step 1: Scenario A - Internet Modem / Router
with Coax Port
Notes: Your Internet will be down temporarily during this step.
a TurnoyourCableorFiosmodem/router.
bRemove existing coaxial cable from your modem/router.
cConnect existing coaxial cable from the Coax Outlet to the Coax
Splitter IN port.
dConnect the 2nd coaxial cable from the Coax Splitter’s port to the
modem/router.
eTurn on your modem/router, wait for the Internet ready light.
fConnect the 3rd coaxial cable from the ECB6250 Adapter’s Coax
In port to the Coax Splitter’s port.
gConnect the Ethernet Cable from the ECB6250 Adapter’s Ethernet
port to an available LAN port on your modem/router.
hConnect the power for the ECB6250 Adapter and wait until the
Power light is GREEN.
i TheECB6250Adapter’sCoaxlightisoandwillbeGREEN when
another ECB6250 Adapter is detected.
jProceed to step 2
Step 1: Scenario B - Internet Modem / Router
without Coax Port
aConnect the Ethernet Cable from the ECB6250 Adapter’s
Ethernet port to an available LAN port on your router/switch.
bConnect the coaxial cable from ECB6250 Adapter’s Coax In to
the Coax Outlet.
cConnect the power for the ECB6250 Adapter and wait until the
Power light is GREEN.
d TheECB6250Adapter’sCoaxlightisoandwillbeGREEN when
another ECB6250 Adapter is detected.
eProceed to step 2
Step 2: Room that needs Internet
aLocate an available Coax Outlet in the area you would like
to expand your Internet.
Note: Use the provided MoCA splitter if there is an existing device using
the coax connection (i.e., Set-top box or TV).
bConnect the coax cable from the Coax Outlet to the ECB6250
Adapter’s Coax In port.
cConnect the power for the ECB6250 Adapter.
dWait until both the Power and Coax lights turn GREEN.
eConnect the Ethernet Cable from the Network Adapter to a
Networking Device of your choice.
Notes
1 A 3-way MoCA splitter (not included) is required if there are
2 existing devices using the coax connection (i.e., Set-top box
and cable modem).
2 Cablesubscribers:AMoCAPOEltershouldbeinstalledatthe
Internet Service entry point to prevent signal leakage and interfere
with other neighborhood MoCA networks. Please contact your
service provider.
3 Certain DOCSIS 3.1 Cable modems/routers may get interfered
bytheMoCA2.5signal.AMoCAPOElter(notincluded)should
be installed in between the cable modem and the MoCA splitter.