
Connect ScreenBeam MoCA
aLocate an available Coax Outlet in the area you would like
to expand your Internet.
NOTE: Use a MoCA splitter (not included) if there is an existing device
using the coax connection (i.e., Set-top box or TV).
bConnect the coaxial cable from the Coax Outlet to the ECB7250
Adapter’s Coax In port.
cConnect the power for the ECB7250 Adapter.
dWait until both the Power and Coax lights turn GREEN.
eECB7250 Adapter is now bridged to your existing network.
fConnect the Ethernet Cable from the Network Adapter
to a Networking Device of your choice.
MoCA-ready network
MoCA Network Adapter2
Power
Ethernet Cable
Coaxial wiring
behind the wall
Coax Ethernet
Power
Power
Coax
Coax In
ECB7250
MPS
Notes: A MoCA splitter is required if there is
an existing device using the coax connection.
IMPORTANT: An existing MoCA-ready network or another ECB7250
Adapter is required. Internet availability should be delivered from your
Internet service provider device (i.e., Cable or Fios modem/router).