Sea Eagle A42 User manual

Push down on the top & bottom of the
pump to release the black clip and
unravel the hose.
Insert the hose into the “INFLATE” port
on the foot pump.
Note: Use the“DEFLATE”port when
you need to pack your kayak down as
compact as possible.
Four adapters are included. The
Recessed Valve Adapter inates the
Explorers, FastTracks, PaddleSki, Pontoon
Boats and Transom Boats.
Either of the two White Valve Adapters
work with Sport Kayaks, Motormount
Boats and inatable seats.
A42 Bellows Foot Pump
Sea Eagle Boats, Inc. • 19 N. Columbia Street, Suite 1, Port Jeerson, NY 11777 • 1-800-748-8066

Recessed Valve Adapter: Fits over the Recessed
Valve stem.
Wide End Adapter: sits inside the white valve.
Twist Cap Adapter: twist onto the white valve like
a
bottle top.
Open the cap of the white valve and twist on or
insert the adapter. Pump until proper working
pressure (1.1 psi) is met or resistance is felt when
inflating the tubes or the seat is comfortably firm.
Tighten valves firmly to avoid deflation.
(Twist adapter shown.)
Insert the proper adapter into the end of the hose
and lock into place.
Note: Valves can be left attached to the tether or
removed. If more than 1 adapter is needed, it is
best to keep them tethered to the pump.
Insert the recessed valve adapter into the CLOSED
valve (stem in the UP position) and turn to the
right until fully seated. Inflate to proper working
pressure (3.2 psi).
Sea Eagle Boats, Inc. • 19 N. Columbia Street, Suite 1, Port Jeerson, NY 11777 • 1-800-748-8066