Seagull Models P-47D Thunderbolt 60 User manual

1
ASSEMBLY MANUAL
Specications:
Wingspan--------------- 63.0 in (160.0 cm).
Wing area--------------- 728.5 sq.ins (47.0 sq.dm).
Weight------------------- 9.3-9.9 lbs (4.2-4.5 kg).
Length------------------- 51.8 in (131.5 cm).
Engine ------------------ 0.61 - 0.91 cu.in----2 stroke.
---------------------------- 0.91- 1.00 cu.in----4 stroke.
---------------------------- 15cc gasoline engine .
Radio--------------------- 6 channels with 9 servos.
Code : SEA 207K

P-47D underbolt 60 Kit
2
Instruction Manual.
- Congratulations and thank you for purchasing the P47 underbolt. We are pleased to bring you this scale
P47. with this kit you can achieve whatever level of detail you like. Just by following the instruction and n-
ishing the plane in scale-looking trim scheme, beginning scale modelers will end up with a model that very
much represents and full-size P47. Experienced builders will nd ways to add even more detail, making the
P47 underbolt competive in scale contents.
- Here is a list of supplies you should have on hand while you are building. Some of these are optional. Use
your own experience to decide what you need.
- Getting prepare to build as:
- Flat Iron
- White Glue
- CA Glue
- Epoxy Glue
- Ruler
- Cutter
- Sandpaper Bar
- Aluminium Square Fixed Tool
INTRODUCTION
GETTING PREPARE TO BUILD AS

3

P-47D underbolt 60 Kit
4
Instruction Manual.

5

P-47D underbolt 60 Kit
6
Instruction Manual.

7

P-47D underbolt 60 Kit
8
Instruction Manual.

9
BUILD THE FUSELAGE
1.
2.
- Apply White Glue to the surface of the rewall
F0’.
- Firewall ( 3pcs).
3.
- Put the 1 rewall F0 on rewall F0’ to paste them
together.
st
4.
5.
- Fill White Glue on the surface of the 1st rewall
F0.
- Put the 2 rewall F0 on 1 rewall F0 to paste
them together.
6.
7.
- Apply Epoxy around block include 3 layers re-
wall.
stnd

P-47D underbolt 60 Kit
10
Instruction Manual.
8 .
- Arrange the le fuselage side S1, S1’ and the right
fuselage side S2, S2’ as photo for dierence be-
tween inside surface and outside surface.
- Apply White Glue to the surface of right fuselage
side S2 at area need to paste S2’.
Please kindly see in the drawing sheet so
that avoiding mistake at this step.
9.
10.
11.
- Put the right fuselage side S2’ on the right fuse-
lage side S2 to paste them together.
- Apply White Glue to the surface of le fuselage
side S1 at area need to paste S1’.
- Put the le fuselage side S1’ on the le fuselage
side S1 to paste them together.
12.
13.
- Apply thin CA Glue around block include 2
layers the fuselage side.
- Fulselage was nished.

11
14.
- Install rewall block with the right fuselage side
S2,S2’ by Epoxy glue.
16.
17.
15.
- Put former F1 on the right fuselage side S2,S2’.
- Use the ruler to adjust perpendicular angle of
former F1 and the right fuselage side S2, S2’.
- Apply CA Glue to keep xed former F1 and the
right fuselage side S2, S2’.
Continue to install former F13 as the in-
struction photos below.
19.
20.
18.

P-47D underbolt 60 Kit
12
Instruction Manual.
21 .
22.
23.
24.
25.
28.
26.
27.

13
31.
32.
30.
33.
34.
35.
36.
29.

P-47D underbolt 60 Kit
14
Instruction Manual.
37.
38.
39.
40.
41.
42.
43.
44.

15
48.
46.
49.
47. 51.
52.
50.
45.

P-47D underbolt 60 Kit
16
Instruction Manual.
53.
54.
55.
56.
57.
58.
60.
59.
- Use White Glue to paste former F14’ ( 2pcs) on
former F14.
- Apply CA Glue around block include 3 layers for-
mer F14, F14’.

17
62.
63.
61.
- Attach M3 blind nut ( 4pcs) to block of former
F14, F14’.
- Apply CA Glue around M3 blind nut ( 4pcs).
- Install block of former F14, F14’ to the fuselage
side.
64.
- Apply CA Glue to keep xed block former F14,
F14’ with two side of fuselage.
- Continue to install for the end former.
- Use Aluminium Square Fixed Tool to go through
all formers at the square hole on each former.
65.
66.

P-47D underbolt 60 Kit
18
Instruction Manual.
- Install F16 and apply CA Glue to keep xed.
- Install F2’ to F2 by White Glue.
- Apply thin CA Glue around block include 2 lay-
ers former F2,F2’.
67.
68.
69.
72.
70.
73.
71.
- Install F26 and apply CA Glue to keep xed.
- Install F27 and apply CA Glue to keep xed.

19
74.
75.
76.
- Install F17 ( 3pcs) to fuselage and apply CA Glue
to keep xed.
- Install F18 ( 2pcs) to fuselage and apply CA Glue
to keep xed.
- Install SW1 at right side and SW2 at le side, then
apply CA Glue to keep xed.
- Getting prepare set of antenna include F19, F19’
and M4 blind nut.
78.
79.
77.
- Paste F19’ on F19 by CA Glue.
- Attach M4 blind nut to block of former F19, F19’
and apply CA Glue around M4 blind nut.
- Install block of former F19, F19’ to fuselage and
apply CA Glue to keep xed.

P-47D underbolt 60 Kit
20
Instruction Manual.
80.
- Install H17 to fuselage and apply CA Glue to keep
xed.
- Install F32 to fuselage and apply CA Glue to keep
xed.
81.
82.
83.
84.
85.
86.
- Install F20 ( 2pcs) to fuselage and apply CA Glue
to keep xed.