Sealife SL400 User manual

Instruction Manual
SeaLife SportDiver Underwater Housing for iPhone® SL400
[add cover picture]

Go to www.sealife-cameras.com/service/manuals.html for
ENGLISH, FRANÇAIS, DEUTSCH, ITALIANO, ESPAÑOL and
NEDERLANDS versions
About this manual
• This manual and specifications are subject to change without notice.
• Visit SeaLife-Cameras.com for updates to this manual.
Important
• Do not directly or indirectly expose the underwater housing to spray-
on sunscreens. Most spray-on sunscreens contain chemicals that
may react with polycarbonate and other plastics, causing cracks that
comprise the waterproof seal.
• Do not expose the underwater housing to extreme temperatures, or
direct sunlight for extended periods of time.
• Soak the sealed underwater housing in fresh water for 20 minutes
after each use. Push each button 20 times to flush out any trapped
salt or debris. Fully dry the housing with clean towel before opening.
• Do not attempt to service the underwater housing. Contact your local
authorized SeaLife dealer if the camera requires service.
Registered Trademarks
• iPhone® is a registered trademark of Apple Inc
• Bluetooth® is a registered trademark of Bluetooth Special Interest
Group
• SeaLife® and SportDiver® are registered trademarks of Pioneer
Research

Table of Contents Page #
I. Package contents
II. Optional accessories
III. Getting to know your underwater housing
IV. Getting started
V. Using the SportDiver app
VI. Important care and maintenance
VII. Maintaining a waterproof seal
VIII. How to install/remove the O-ring
IX. Care and Maintenance
X. Great Underwater Pictures Made Easy
XI. Troubleshooting
XII. Spare parts and service
XIII. Specifications
XIV. FCC statement
XV. Warranty statement

I. Package contents
SportDiver Underwater Smartphone Housing
Color-correction filter
Vacuum pump
Rubber Grip Tabs (12x Small, 12x Medium and 12x Large)
Note: 10 medium tabs pre-installed in UW housing)
Spare O-rings (1x Main O-ring and 1x Vacuum Check Port O-ring)
O-ring lubricant
O-ring removal tool
Deluxe wrist strap with clip
Moisture Muncher sampler pack (1 capsule)
Instruction Manual (English)
AAA alkaline batteries (2)
EVA carry case

II. Optional accessories (Sold separately)
Back pack
Visit your local authorized SeaLife dealer or www.sealife-cameras.com for
a complete listing of accessories.
Sea Dragon Photo-Video Light
2000 lumen +
Moisture Muncher capsules 10-pack (SL911)

III. Getting to know the underwater housing
1 – Lens
2 – Battery indicator LED
- Blinks when charging
- Solid when fully charged
3 – LCD Display
4 – Power ON indicator LED
5 – Power/Mode/Back 1-step button
6 – Shutter/OK button
7 – Battery pull tab
8 – Li-ion battery
9 – Serial # (inner camera)
10 – Battery door
11 – Microphone
12 – UP/Display button
13 – WiFi indicator LED
14 – Down/WiFi button
15 – USB/Memory Card cover(open)
16 – Power ON indicator LED
17 – Speaker
18 – MicroSD memory card slot
19 – Micro HDMI output
20 – Micro-B USB output

IV. Getting started
1. Open the underwater housing. Push and hold release button and
rotate cam lock counter-clockwise.
2. Insert two alkaline or NiMH AAA batteries.
3. Download SeaLife SportDiver app from Apple App Store.
4. Fully charge iPhone and turn ON Airplane mode and Do Not Disturb.
Turn OFF Auto Lock.
5. Clean optical lenses on iPhone and underwater housing
6. Inspect underwater housing O-rings for cuts or other damage. Clean
and lube O-rings. Only a thin film of lube should be applied.
7. Power ON underwater housing
8. Power ON iPhone and open SeaLife SportDiver app.
9. Insert iPhone into underwater housing. If necessary, exchange rubber
grip tab size that fits your specific iPhone model.
iPhone mode Grip tab size
iPhone SE (2nd Gen - 2020) L
iPhone 7 L
iPhone 7 Plus S
iPhone 8 L
iPhone 8 Plus S
iPhone 10 M
iPhone 10R M
iPhone Xs M
iPhone Xs Max S
iPhone 11 M
iPhone 11 Pro M
iPhone 11 Pro Max S
10. Close the underwater housing. Engage the waterproof door into the
cam lock and rotate clockwise until it stops and locks in place.
11. Unscrew Vacuum Check Port cap.

12. Hold vacuum pump against vacuum check port and pump until the on-
screen gauge reaches the target vacuum pressure.
13. The underwater housing will analyze the internal vacuum pressure for
3.5 minutes. After the leak analysis is complete, the housing is ready
for underwater use.
V. Using the SeaLife SportDiver Camera app
Add content

VI. GREAT UNDERWATER PHOTOS AND VIDEOS MADE EASY
Clear water visibility
Clear water is essential for good results. Tiny particles floating in the
water cause low visibility and poor image quality. Avoid stirring up the sea
floor with your fins. Limit your shooting distance to 1/10 of the water
visibility. For example, if the visibility is 40ft (12m), you should keep your
shooting distance to within 4 feet (1.2m).
Keep close shooting distance
The ideal shooting distance is within 6ft (1.8m), and the closer the better.
The camera’s minimum focus range is 12” (30cm). Use the optional
Super Macro Lens (SL571) for closer underwater focus distance of 3.5” to
7” (9cm to 18cm), or the 10X Close-up Lens (SL572) for closer
underwater focus distance of 6” to 24” (15 to 60cm).
Move calmly and control your buoyancy
It is very hard to take good photos or videos when you are moving around
or buoyancy is not controlled. Look around for great picture opportunities.
First, position yourself at the best angle and neutralize your buoyancy.
Second, use the LCD monitor to perfectly frame your subject, check your
shooting distance and keep the camera steady. Third, be calm and
patient: Sometimes you have to wait a little bit so the fish that were
frightened away, come back. Don’t chase the fish, let the fish come to
you. Always observe safe‑diving rules.
Take several photos
You can always delete the bad shots later.
Avoiding blue photos and video
Water reduces light and filters out red/yellow colors resulting in darker,
bluer ambient lighting. There are two ways to restore the lost colors:
1) Use one or two SeaLife Sea Dragon underwater photo-video lights
(optional accessory) to enhance colors and photo/video quality.

2) When NOT using an underwater photo-video light, set the camera’s
White Balance setting to Underwater Deep or Underwater Shallow
depending on your depth. If you are using a photo-video light, set the
White Balance to Auto.
Visit the SeaLife website for updates and how-to tutorials
Any updates to the manual or additional tips and advice can be found on
the SeaLife website at www.sealife-cameras.com.
7. Ask your local SeaLife dive dealer about underwater photography
courses.
Most SeaLife dive dealers offer underwater photography courses which
includes hands-on training as well as many helpful tips and techniques to
underwater photography.
Troubleshooting Guide >>

VII. TROUBLESHOOTING GUIDE
Refer to the symptoms and solutions listed below before sending the
camera for repairs. Any updates may be found on the SeaLife website at
www.sealife-cameras.com. Look for “Techncial Updates” section. If repair
service is still needed, please contact your local authorized SeaLife
dealer for service.

VIII. KEY SPECIFICATIONS
For comprehensive product specifications, visit www.sealife-cameras.com
Battery:
Battery life:
Waterproof: Individually depth tested to 130’ (60 m)
Operating temp: 0°F to 120°F (-18°C to 50°C)
Storage temp: -20°F to +140°F(-29°C to +60°C)
Tripod mount: Standard ¼-20 tripod threads
Certification: CE, ROHS, FCC
Weight:
Dimensions:
Warranty: 1 year limited warranty
Country of Origin: China

IX. FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
‑ Reorient or relocate the receiving antenna.
‑ Increase the separation between the equipment and receiver.
‑Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‑Consult the dealer or an experienced radio/TV technician for help.

X. IC Statement
(RSS-Gen section 7.1.3)
Canada, Industry Canada (IC) Notices
This device complies with Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Canada, avis d'Industry Canada (IC)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada
(IC) radio frequency exposure limits. The Wireless Device should be used in such
a manner such that the potential for human contact during normal operation is
minimized.
This device has been evaluated for and shown compliant with the IC Specific
Absorption Rate (“SAR”) limits when operated in portable exposure conditions.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite
d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de
sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce dispositif a été évalué pour et démontré conforme à la Taux IC d'absorption
spécifique ("SAR") des limites lorsqu'il est utilisé dans des conditions d'exposition
portatifs.
CE
The SeaLife SportDiver SL400 is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.

XI. Limited Warranty
Please register your SeaLife product online at: www.sealife-
cameras.com/warranty.
Manufacturer warrants to the original purchaser of new and unused product in its
original packaging, for a period of one (1) year from the date of purchase, that the
product is free from defects in workmanship and materials. “Used” product is
defined as any product used underwater or for any purpose other than in-store
display. In the event the original purchaser believes there is a defect in a product, it
is recommended that the purchaser contact SeaLife Customer Service or the
importer in the country where the product was purchased for troubleshooting
advice. The local authorized SeaLife Dealer can also assist with certain product
servicing. If it is determined that the product requires servicing, a return
authorization number will be issued. In the event of a product defect, Manufacturer
will, in its sole discretion, repair or replace this product free of charge, provided the
complete defective product is returned, at the sender’s risk, within one (1) year of
its purchase date, to the applicable address, accompanied by: (a) a return
authorization number, (b) a letter describing the defect, (c) the purchaser’s return
address (no PO Boxes are permitted) and daytime telephone number, and (d) a
copy of the original purchase receipt or proof of purchase with the purchase date of
the product. Additionally, Manufacturer’s obligation to repair or replace a product
hereunder is subject to the condition that Manufacturer is able to confirm the defect
and replicate any alleged leaks. For more information about repair service or to
locate a service center in your country, please visit the SeaLife website at
www.sealife-cameras.com. Excluded from this warranty are damages caused by
abuse, misuse, wear, tear, cosmetic damages, water damage caused by damaged
O-ring or O-ring contact surfaces or debris trapped between the product housing
and the O-ring, repair or attempted repair by unauthorized persons, improper
storage, non-performance of scheduled maintenance, battery leakage or software
programs. Possible compulsory legal warranty rights of purchaser towards
distributor under national law are not affected by this warranty statement.
THE FOREGOING IS PURCHASER’S SOLE AND EXCLUSIVE REMEDY
TOWARDS MANUFACTURER, AND MANUFACTURER’S SOLE AND
EXCLUSIVE OBLIGATION, WITH RESPECT TO A CLAIM THAT A PRODUCT IS
DEFECTIVE. EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE,
MANUFACTURER DISCLAIMS ALL

WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT UNDER NO CIRCUMSTANCES SHALL MANUFACTURER BE
LIABLE TO PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES
INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, INJURIES TO
PERSONS OR PROPERTY, OR DAMAGES FOR WHICH PURCHASER MAY BE
LIABLE TO OTHER PERSONS OR ENTITIES, EVEN IF MANUFACTURER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND WHETHER
THE CLAIM IS FOR BREACH OR REPUDIATION OF CONTRACT,
BREACH OF WARRANTY, TORT, NEGLIGENCE OR OTHERWISE. IN NO
EVENT SHALL MANUFACTURER’S MAXIMUM AGGREGATE LIABILITY
ARISING OUT OF OR RELATING TO THE SALE OF THE PRODUCT EXCEED
THE PURCHASE PRICE PAID TO MANUFACTURER FOR THE PRODUCT.
ANY OF THE FOREGOING NOTWITHSTANDING, ACCORDING TO
COMPULSORY LAW (ESPECIALLY REGARDING PRODUCT LIABILITY), SOME
STATES, COUNTRIES AND
TERRITORIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, IN WHICH CASE THE
FOREGOING
LIMITATIONS MAY NOT APPLY.

[add rear cover]