Sears COLOR SWITCH PLUS 6.5FT REGAL FIR User manual

6.5FT REGAL FIRPRODUCT NAME
Date of purchase: _____/ _____/ _____
M44792
810174021608
Product code:
UPC code:

ASSEMBLY INSTRUCTIONS MADE IN CHINA
6.5FT REGAL FIR
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from SEARS. Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig.B-Tree and Light Assembly *Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V~60Hz, 0.16A
Output: 29V-0.28A
C
D
E
F
Section 3
Section 2
Section 1
E: Control Box
Button A: ON/OFF
Button B: COLOR
Button C: MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLOR SWITCHING
(1) Slide 4 legs(B) upwards
into main engine(A)
(2) Three functions of stand
I-Lights on
Stand does not rotate
O-Off
II-Lights on
Stand rotate
Fig.A-Tree Stand Assembly
3. Assemble the tree from the bottom to the top. Start with the bottom section and insert into the assembled
stand. Make sure the pole is firmly inserted and secured into the stand. Then connect the tree’s light string
adaptor( F) to rotating stand’s end cord(C).
(Please note 8-functions control box(E) is wrapped in the lowest layer, if the remote control disappears, you can
control the light string here.)
4. Continue by inserting the upper tree section to the lower section until inserting the tree top.
5. Finally shape the tree by arranging the tips on the branches to give the desired effect. Some tree
styles have “side branches” attached to the main branch stem that require additional shaping as shown
Fig.C. After shaping the complete tree the finished look should be natural and full.
Fig.C
MODEL #:W-1289RT-66KHZ

ASSEMB LY INST RUCTIONS MADE IN CHINA
MODEL #:W-1289RT-66KHZ
6. Then insert the plug of stand (D) into the wall outlet finally. Your entire tree should now be lit. If
some bulbs do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs.
Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations. For pre-lit trees, first unplug the rotating stand’s plug from
the wall outlet.
2. Gather the branches upwards and secure them in place. Then disassemble the tree from the top to the
upper section. Gently lift off the 2 sections and place them into box.
3. Then unplug the bottom section tree’s light string adaptor( F) from rotating stand’s end cord(C) and put
the bottom section into box. Then disassemble the tree stand and packinto box and tape it shut.
4. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree
to excessive heat or humidity may damage your tree.
TROUBLE SHOOTING TIPS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please checkto make sure that all plugs are properly connected as shown in Fig.B and the power cord is
plugged into the wall outlet. Refer to assembly guide for instructions.
2. Please checkfor loose, broken or missing light bulbs and replace as needed.
SPARE PARTS
For pre-lit trees spare bulbs are included. If extra parts are needed, please contact our customer service
center.
HOW TO USE REMOTE CONTROL:
Remote Control Front Remote Control Back
1: Remote Control Operating Range: 5 meters
2: Remote Control Functions:
Button A: ON/OFF
Button B: COLOR
Button C: MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLOR SWITCHING
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLORSWIT CHING 3.Remote Control includes 1 piece 23A battery packed
separately with instruction manual.
WARNING
1. Use only power adaptor supplied with this product, using a different adaptor will damage the lights
and cause fire, electrical shockhazards.
2. FOR INDOOR USE ONLY.
TreeID#: CustomerName:
TreeUPC#: Address:(NoP.O.Boxes)
StorePurchased: City&State:
Specify Problem: Zip Code:
Day Phone:
Date Purchased:
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, please contact us at 1-844 946 8733
Or visit our website at www.winnerstree.com.
Welcome to email us: [email protected]
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS RE
Q
UIRED WHEN RE
Q
UESTING REPLACEMENT PARTS.
Do Not Return This Product To The Store.
ON/OFF
COLOR
MODE -23A+

Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
Please refer to part numbers when reordering