Seascape 14 User manual

Seascape14
User Manual
Draft V4
18/7/2018

2
Jib furler / Bartels F0
Stay adjuster 2x / RF2331
Tie ball 2x with A-frame / RF1317AR
1. Mast
time / 10 min
3
3
3
1
1
2
2
2
1
2
3
SSC 14 user manual
1. Mast

2
3
Attach furler to the bow chainplate. Add soft shackle for jib.
Attach stay adjuster to the side chainplate. Use double mens knot to attach A-frame.
Leave knots undone to adjust the length. Make a loop in the center and adjust the length.
12
34
56
SSC 14 user manual
1. Mast

4
Jib furler / Bartels F0
Front stay
Side stay 2x
Front stay dyneema rope
Main hallyard
Spi hallyard
Dodger elastic rope
Dodger thimble 2x
time / 20 min
8
1
1
9
8
2
2
4
4
7
3 5
5
6
3
3
1
2
3
4
5
6
6
7
7
Jib hallyard
8
8
9
9
SSC 14 user manual
1. Mast

4
5
Attach the furler to the front chaiplate.
Connect side stays to nishe the dodger assembly.
Attach the front stay and prepare jib hallyard.
Prepare the mainsheet.
Prepare the spi hallyard.
Use dyneema to secure the elastic rope of a dodger.
1
4
6
2
5
3
SSC 14 user manual
1. Mast

6
Prepare the mast and attach side stays to the deck. Secure boom with elastic strap.
Lift the mast with mast base and mast foot aligned. Hold it and take the front stay.
Prepare jib hallyard.Attach the front stay.
78
9 10
11 12
SSC 14 user manual
1. Mast

7
Gnav block with dyneema / RF15212
Gnav block with dyneema loop / RF15202
Cunningham block / RF15212
Cunningham block with dyneema rope / RF15202
Gnav rope
Cunningham rope
time / 20 min
1
2
4
3
6
5
1
1
2
2
3
3
4
4
5
5
6
6
SSC 14 user manual
1. Mast

7
8
Connect the gnav slider loosely to the mast. Attach the block with dyneema loop and elastic rope.
Attach the gnav rope to upper block. Connect the lower block.
1 2
34
SSC 14 user manual
1. Mast

9
Use shackle to attach the cunningham block. Connect the upper block.
Use dyneema rope to attach to upper block.
12
3
SSC 14 user manual
1. Mast

10
Bowsprit
Tackline with tie ball / RF1317AR
Single block with swivel shackle/ RF15100
Pole out dyneema with tie ball / RF1317AR
Two single blocks / RF15100 + RF35100
Furling line
2. Deck
time / 10 min
6
1
2
4
5
3
1
2
2
3
3
4
4
5
5
6
6
SSC 14 user manual
2. Deck

10
11
Tie the furling line to the furler. Run the furling line through the block.
Attach tackline to the mast base. Adjust the position of the bowsprit.
Run the tackline through the bowsprit and add tie ball. Tighten the double mens knot with bowsprit extended.
12
34
56
SSC 14 user manual
2. Deck

12
Attach the block, run the poleout through. Add tie ball. Run the poleout to through the assebled double block.
Tie the poleout back to the saddle.
12
3
SSC 14 user manual
2. Deck

13
Snuffer
Snuffer elastic rope
Snuffer dyneema rope
Footstrap
Footstrap soft shackle
Footstrap elastic rope
Footstrap elastic rope
Spi hallyard elastic dodger with 2 blocks / RF15100
Jib block with dyneema / RF35101
time / 20 min
8
9
2
1
3
4
56
7
1
1
2
3
3
4
4
5
5
6
6
7
8
8
9
9
SSC 14 user manual
2. Deck

13
14
Tie jib block to the center of the bar and add snuffer. Use dyneema to tie the snuffer to the block.
Attach footstraps to the xing plate on both sides. Use soft shackle to attach the center of the strap.
Run the front elastic rope throught the lowest cleat. Run the back elastic rope aroung the rudder hinge.
12
34
56
SSC 14 user manual
2. Deck

15
Mainsail
Mainsheet block with rope / RF45101
Mainsheet rachet / RF46101
Mainsail clew rope
Mainsheet swivel cleat / RF5
Mainsheet
Jib
Trapeze cleat with jib cunningham rope / RF5121
Jibsheet
Gennaker
Spi hallyard
Gennaker sheet rachet with swivel 2x / RF46101
Gennaker sheet endless
Mainsheet boom strap 2x
3. Sails
time / 40 min
7
9
8
11
12
12
13
10
1
23
4
6
5
1
2
2
3
3
14
4
4
5
5
6
7
8
8
9
9
10
11
11
12
12
13
13
14
14
SSC 14 user manual
3. Sails

15
16
Tie a hallyard to the head attachment.
Lift the main sail. Connect gnav and cunningham.
Attach mainsheet block with rope. Add mainsail clew rope.
12
34
56
SSC 14 user manual
3. Sails

17
Tie mainsheet to the boom and add mainsheet rachet. Attach swivel to the boom with strap.
Attach trapeze cleat to the furler. Use soft shackle to attach jib.
Prepare for lifting the jib. Pull jib hallyard while lifting jib and closing the zipper.
78
910
11 12
SSC 14 user manual
3. Sails

17
18
Tie a loop to attach the trapeze cleat. Secure trapeze cleat.
Attach the jibsheet to the clew. Take jibsheet to the block and further to sunffer bar.
13 14
15 16
SSC 14 user manual
3. Sails

19
Attach gennaker tack to tackline. Tie the hallyard to the head.
Bring the other end through the hole and secure it. Attach rachets on both side chainplates facing forward..
Run the endless gennaker sheet through the rachets. Tie both sheet ends on the clew.
19 20
21 22
23 24
SSC 14 user manual
3. Sails

19
20
Tighten gnav and cunningham. Mark the position of the knot.
Tie a double mens knot. Try to repeat rst step few times.
If necessary repeat the steps 2 and 3. Use the pocket on the mainsail to store hallyard end.
25 26
27 28
29 30
SSC 14 user manual
3. Sails