Seasonal Living Provenance Signature S156714362 User manual

Revised 02.01.2024 1
Continued on next page
ASSEMBLY INSTRUCTIONS SUMMARY
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND CHECK THAT
YOU HAVE ALL PARTS AND TOOLS PRESENT. DO NOT ASSEMBLE
THE DINING TABLE IF YOU ARE MISSING ANY PARTS.
Do NOT use power tools to assemble and tighten bolts.
Hand-tighten all bolts ONLY using the provided Allen key.
Step 1: Locate the assembly parts attached in the tabletop carton box.
Step 2: Unpack the pedestal bases and move them to desired location.
Step 3: Adjust the pedestal glides on each base.
Step 4: Install the tabletop on top of the pedestal bases.
Step 5: Make final adjustments.
IMPORTANT ASSEMBLY INFORMATION
1. Follow all packaging handling instructions (if any).
2. Check that you have all parts prior to assembly.
Do not assemble this dining table without all parts being available.
3. All assembly parts can be located on the underside of the tabletop.
4. Read the product care instructions prior to assembling the dining table.
Provenance Signature Collection by Laura Muller
Meditation Rectangle Dining Table Assembly Instructions
S156714362 Meditation Rectangle Dining Tabletop
S15671346266 or S15671346299 Meditation Dining Table Bases
SeasonalLiving.com
Tel [phone]
[email protected]
Seasonal Living
Park Tower, Suite 350
4009 Banister Lane
Austin, Texas 78704
United States of America

Continued on next page
Revised 02.01.2024 2
Provenance Signature Collection by Laura Muller Assembly Instructions
5. Do not attempt to assemble this dining table without the assistance of 4 physically capable adults. This
product is heavy, lack of physical assistance may result in product damage or physical injury to you or others.
6. Identify desired location of the dining table and check that the ground surface is solid, flat and level.
7. We recommend that you use 1 or 2 soft clean moving blankets to help you protect the product post
unpacking and prior to assembly.
8. DO NOT drill or use any other power tools to assemble or tighten the bolts on any part of this dining table.
Only use the Allen key to tighten all bolts.
9. Seek out and check that you have all the adjustable glides (on the pedestal bases) and that they screw and
unscrew easily.
10. Contact Seasonal Living should you require assembly assistance:
Email: [e-mail] Tel: [phone] Mon-Fri 9am to 4pm US Central time.
PARTS LIST
D
Adjustable Glides
31" x .78" x 1.1"
8 PCS
C
Metal Support Bracket
33.85" x 18.11"
2 PCS
B
Allen Key .20"
1 PC
A
Bolt .31" x 1"
16 PCS

Continued on next page
Revised 02.01.2024 3
Provenance Signature Collection by Laura Muller Assembly Instructions
STEP 1: LOCATE THE ASSEMBLY PARTS IN THE TABLETOP CARTON BOX.
• Open the carton box containing the tabletop.
• Remove all parts: 2 metal support brackets and 1 red plastic bag containing the assembly parts A, B and D.
• Check against these instructions that you have all the correct counts of assembly parts.
• Remove the support brackets from the back side of the tabletop.
STEP 2: UNPACK THE PEDESTAL BASES & MOVE THEM TO THE DESIRED LOCATION OF ASSEMBLY AND USE.
• Position the support brackets on top of the pedestal bases, lining up
the holes of the support brackets with the holes in the pedestal bases.

Continued on next page
Revised 02.01.2024 4
Provenance Signature Collection by Laura Muller Assembly Instructions
• Thread 4 bolts through one support bracket and hand tighten to one pedestal base using
the Allen key. Repeat with another 4 bolts for the second support bracket and pedestal base.
• Make sure the support brackets are securely fastened to the pedestal bases.
• Recheck that the pedestal bases are positioned in the final desired location.
STEP 3: ADJUST THE PEDESTAL BASE GLIDES (located on the bottom of each pedestal base).
• Adjust the leveler glides to desired height on each pedestal base.
STEP 4: MOVE THE TABLETOP ON TOP OF THE PEDESTAL BASES AND ATTACH.
• Lift all sides of the tabletop at the same time.
• Position the tabletop centrally over the pedestal bases, using the holes in the tabletop
as a guide to line up with the holes in the support brackets.
• Using 4 bolts for each pedestal base, connect the tabletop to the support brackets.

Revised 02.01.2024 5
Provenance Signature Collection by Laura Muller Assembly Instructions
• Hand tighten the bolts with the Allen key and make sure the tabletop
is well secured to each support bracket and each pedestal base.
STEP 5: MAKE FINAL ADJUSTMENT TO BOTH PEDESTAL BASE GLIDES FOR IDEAL TABLE HEIGHT.
• Check that the assembled dining table is the correct height.
Dining tables typically measure about 30 inches (from ground surface to tabletop).
• Check to see if your dining chairs fit well underneath the tabletop.
• Adjust glides if necessary.
• Well done—you did it. Enjoy!
CLEANING AND CARE
Treat all surfaces of the bench with care. While the surface is
scratch resistant, avoid items that can damage the surface material.
Clean all surfaces with a dry or damp, soft cloth on a regular basis.
DO NOT use any abrasive cleaners or liquids.
The assembly parts may loosen over time.
Periodically check that the top and base are well-secured.
For detailed product care instructions, read the instructions
shipped with your table or visit SeasonalLiving.com and navigate
to the product page for more information.