Seasonal Living Provenance Signature S1568100215 User manual

Revised 04.05.2023 1
Continued on next page
ASSEMBLY INSTRUCTIONS SUMMARY
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND CHECK THAT
YOU HAVE ALL PARTS AND TOOLS PRESENT. DO NOT ASSEMBLE
THE DINING TABLE IF YOU ARE MISSING ANY PARTS.
Do NOT use power tools to assemble and tighten bolts.
Hand-tighten all bolts ONLY using the provided Allen Key.
Step 1: Locate the Assembly Parts in the Bench Top carton box.
Step 2: Unpack the Bench pedestal bases and move them to desired location.
Step 3: Adjust the Bench pedestal glides on each base.
Step 4: Install the Bench Top on top of the pedestal bases.
Step 5: Make final adjustments.
IMPORTANT ASSEMBLY INFORMATION
1. Follow all packaging handling instructions (if any).
2. Check that you have all parts prior to assembly. Do not assemble this Bench without all
parts being available
3. ALL assembly parts can be located on the underside of the Bench Top.
4. Read the Product Care Instructions prior to assembling the Bench.
SeasonalLiving.com
Tel [phone]
Fax [phone]
[email protected]
Seasonal Living
Park Tower, Suite 350
4009 Banister Lane
Austin, Texas 78704
United States of America
Provenance Signature Collection by Laura Muller
Meditation Bench Assembly Instructions
S1568100215 Rectangle Meditation Bench Top
S1568100225299 Meditation Bench Bases

Continued on next page
Revised 04.05.2023 2
Provenance Signature Collection by Laura Muller Assembly Instructions
5. Do not attempt to assemble this Bench without the assistance of 2 physically capable adults. This product is
heavy, lack of physical assistance may result in product damage or physical injury to you or others.
6. Identify desired location of the Bench and check that the ground surface is solid, flat and level.
7. We recommend that you use 1 or 2 soft, clean moving blankets to help you protect the product post
un-packing and prior to assembly.
8. DO NOT drill or use any other power tools to assemble or tighten the bolts on any part of this dining table.
Only use the Allen Key to tighten all bolts.
9. Seek out and check that you have all the adjustable glides (on the dining table base) and that they screw
and unscrew easily.
10. Contact Seasonal Living should you require assembly assistance:
Email: [e-mail] Tel: [phone] Mon-Fri 9am to 4pm US Central time.
PARTS LIST
C
Allen Key .20"
1 PC
B
FlatWasher .31" x .75"
16 PCS
A
Bolt M8 x 25 mm
16 PCS

Continued on next page
Revised 04.05.2023 3
Provenance Signature Collection by Laura Muller Assembly Instructions
STEP 1: LOCATE THE ASSEMBLY PARTS IN THE BENCH TOP CARTON BOX
a) Open the carton box containing the Bench Top.
b) Remove all parts: 2 metal assembly bracket and 1 red plastic bag containing the assembly parts.
c) Check against these instructions that you have all the correct counts of assembly parts.
STEP 2: UNPACK THE BENCH BASES & MOVE THEM TO THE DESIRED LOCATION OF ASSEMBLY AND USE
a) Position the assembly brackets on top of the dining table pedestal bases, lining up the holes of the assembly
brackets with the holes in the pedestal bases.

Continued on next page
Revised 04.05.2023 4
Provenance Signature Collection by Laura Muller Assembly Instructions
b) Place a washer over each of the 4 centrally located holes on top of the assembly bracket on each pedestal base.
c) Thread a bolt through the washer and through the assembly bracket and hand tighten using the Allen Key.
Repeat with all remaining washers and bolts (total 4 washers and 4 bolts) for each table base.
d) Make sure the assembly brackets are well secured to the Bench pedestal bases.
e) Recheck that the Bench pedestal bases are positioned in the final desired location.
STEP 3: ADJUST BENCH PEDESTAL BASE GLIDES (located on the base of each base)
a) Adjust the leveler glides to desired height on each pedestal base.
STEP 4: MOVE THE BENCH TOP ON TOP OF THE BENCH PEDESTAL BASES AND ATTACH
a) Lift all sides of the Bench Top at the same time.
b) Position the Bench Top centrally over the pedestal bases using the holes in the Bench as a guide to line up
with the holes in the assembly bracket.
c) Using the remaining 4 bolts and 4 washers for each pedestal base, connect the tabletop to the assembly bracket.

Revised 04.05.2023 5
Provenance Signature Collection by Laura Muller Assembly Instructions
d) Hand tighten the bolts with the Allen Key and make sure the Bench Top is well secured to each assembly
bracket and each Bench Pedestal base.
STEP 5: MAKE FINAL ADJUSTMENT TO BOTH PEDESTAL BASE GLIDES FOR IDEAL BENCH HEIGHT
a) Check that the assembled Bench is the correct height for your needs.
b) Adjust glides if necessary.
d) Well done—you did it. Enjoy!
CLEANING & CARE
Treat all surfaces of the dining table with care. While the surface is
scratch resistant, avoid items that can damage the surface material.
Clean all surfaces with a dry or damp, soft cloth on a regular basis.
DO NOT use any abrasive cleaners or liquids.
The assembly parts may loosen over time.
Periodically check that the top and base are well-secured.
For detailed product care instructions, read the instructions shipped
with your dining table or visit SeasonalLiving.com and navigate to the
product page for more information.