Seaward Test n Tag Elite 2 Series User manual

Test n Tag Elite 2 Series Quick Start Guide 339A593 rev 3 TESTED, TRUSTED…WORLDWIDE
!
!
!
!
!
!
Test n Tag Elite 2 Series Printers Quick Start Guide!

Test n Tag Elite 2 Series Quick Start Guide 339A593 rev 3 TESTED, TRUSTED…WORLDWIDE
Further information and product registration can be found at:
• Apollo Series www.seaward.com
• Apollo+ Series www.seaward.com
• PrimeTest 350 (firmware update required, please see www.seaward.com)
• PrimeTest Elite+ www.seawardprimetest.com
• PrimeTest Pro www.seawardprimetest.com
• Rigel 288+ (firmware update required, please see www.rigelmedical.com
• Rigel UNI-SiM (firmware update required, please see www.rigelmedical.com
!
Connecting the Test n Tag printer to your Seaward Tester
!
PrimeTest 350, Rigel 288+ & UNI-SiM
!
Connection
1. Make sure your Test n Tag Elite 2 printer is switched on.
2. From the “Home Screen” press!F4!on your Seaward tester.!
3. Scroll to “Configuration” using the!arrow keys!and press!OK.!
4. Scroll to “Bluetooth Favourites” using the!arrow keys!and press!OK.!
5. Scroll to “Printer” and press!F3.!
6. Press!F1!to search for the printer.! (hint: ! it helps if the printer is the only Bluetooth device turned on at this time) !
7. The Bluetooth printer will be displayed as “Elite…..” followed by the serial number.
8. Press!F4!to select the printer and then!F3!to add.!
9. Scroll to “Printer Type” and press the!right arrow,!scroll to Test n Tag Elite and press!F4,!press!F4!twice more to save.!
!
Testing the connection
10. To test the connection press!F4!on your Seward tester and scroll to “View Saved Data” and press the!right arrow.!
11. Press!F4!to select the first result.!
12. Press!F4!and scroll to “Print Label” and then press!F4!again. The screen shows how the label will look.!
13. Press!F1!to scroll through the different formats then!F4!to select the format. This will then be sent to the printer.!
!
Apollo Series, PrimeTest Elite+ & PrimeTest Pro
!
Connection
1. Make sure your Test n Tag Elite 2 printer is switched on.
2. From the Apollo “Home Screen”!! !press the Menu button F4.! !
3. In the menu select Bluetooth by pressing key number 3.! !
4. The ‘Bluetooth active’ symbol will appear next to the battery symbol.!!
5. Press the Bluetooth search button!F2! ! (hint: it helps if the printer is the only Bluetooth device turned on at this time) !
6. Select the “Printer” field on the Apollo (using the arrow keys) and from the drop down select your printer. For example “Elite . . . .”!(Test n
Tag Elite 2)
7. Press!F4!to save the new Bluetooth configuration!
!
Configuring the label
8. You can now select the printer in the Apollo Series and confirm the label sizes and / or company logos. To do this select “View Data”, by
selecting number “1”!!!
Note: !! You will require test data to be already stored on the instrument to do this. !!
9. Select an asset using the arrow keys and function key F4.!!
10. Select a full test result using!F4!again to display the “Test Details” for the asset.!!
11. Select menu/options, function key!F4,!to display the “Test Results Option”.!!
12. Highlight and select “Print Label” using the arrow keys and function key!F4!,!a virtual image of the current label is shown on the
instrument.
13. To setup the printer that was paired in the earlier steps use the tools function key!F2.! !
14. Using the arrow keys to highlight the bottom line “Printer” then, from the dropdown, select the wireless printer paired earlier.
Note: !! This will add / remove fields depending upon the selection made !
15. Returning to the top line, and again using the arrow keys, the “Title” can be altered (which is used in some label formats)
16. Depending on the printer type, the “Label Size” needs to be confirmed.
Note: !! This is not applicable to all printers and will add / remove fields depending upon the selection made !
17. If a printer logo is required this can be selected in the “Pass Logo:” or “Fail Logo:” fields,
18. Depending on the printer type, the density can be altered. However, it may be worth leaving this at the pre-set value.
19. Finally, save these setting by using function key!F3.! !
20. A virtual label image will be displayed, which may show a Company Logo depending upon previous selections, and is now ready to be
printed. Alternative versions of the label can be selected using the function key!F3! !
!
If you wish to add a company logo to your labels please see the below how to guides from the ‘Support and Resources’ section of the
Seaward website.
!
010. How do I upload a logo into PrimeTest 300/350 series tester for use with Test n Tag Elite printer?
068. How to Upload your Company Logo onto the Apollo Series!
!